diff mbox series

[v2,2/4] usb: ucsi: glink: use the connector orientation GPIO to provide switch events

Message ID 20231002-topic-sm8550-upstream-type-c-orientation-v2-2-125410d3ff95@linaro.org
State Accepted
Commit c6165ed2f425c273244191930a47c8be23bc51bd
Headers show
Series [v2,1/4] dt-bindings: soc: qcom: qcom,pmic-glink: add a gpio used to determine the Type-C port plug orientation | expand

Commit Message

Neil Armstrong Oct. 2, 2023, 10:20 a.m. UTC 
On SM8550, the non-altmode orientation is not given anymore within
altmode events, even with USB SVIDs events.

On the other side, the Type-C connector orientation is correctly
reported by a signal from the PMIC.

Take this gpio signal when we detect some Type-C port activity
to notify any Type-C switches tied to the Type-C port connectors.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/usb/typec/ucsi/ucsi_glink.c | 54 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

Comments

Dmitry Baryshkov Oct. 3, 2023, 8:05 a.m. UTC | #1 
On Tue, 3 Oct 2023 at 10:13, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> On 02/10/2023 19:26, Dmitry Baryshkov wrote:
> > On Mon, 2 Oct 2023 at 13:21, Neil Armstrong <neil.armstrong@linaro.org> wrote:
> >>
> >> On SM8550, the non-altmode orientation is not given anymore within
> >> altmode events, even with USB SVIDs events.
> >>
> >> On the other side, the Type-C connector orientation is correctly
> >> reported by a signal from the PMIC.
> >>
> >> Take this gpio signal when we detect some Type-C port activity
> >> to notify any Type-C switches tied to the Type-C port connectors.
> >
> > Have you checked, which UCSI version is implemented on SM8550?
> > Is there any chance of GET_CONNECTOR_STATUS / bit 86 actually
> > reflecting the correct orientation?
>
> I checked, and no, the UCSI implementation is based on the UCSI 1.x spec,
> and doesn't have the UCSI 2.x new bits.

Ack, thanks for the confirmation.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

>
> Neil
>
> >
> >>
> >> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> >> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> >> ---
> >
> >
>
diff mbox series

Patch

diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index bb1854b3311d..db6e248f8208 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -8,9 +8,13 @@ 
 #include <linux/mutex.h>
 #include <linux/property.h>
 #include <linux/soc/qcom/pdr.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/gpio/consumer.h>
 #include <linux/soc/qcom/pmic_glink.h>
 #include "ucsi.h"
 
+#define PMIC_GLINK_MAX_PORTS	2
+
 #define UCSI_BUF_SIZE                   48
 
 #define MSG_TYPE_REQ_RESP               1
@@ -52,6 +56,9 @@  struct ucsi_notify_ind_msg {
 struct pmic_glink_ucsi {
 	struct device *dev;
 
+	struct gpio_desc *port_orientation[PMIC_GLINK_MAX_PORTS];
+	struct typec_switch *port_switch[PMIC_GLINK_MAX_PORTS];
+
 	struct pmic_glink_client *client;
 
 	struct ucsi *ucsi;
@@ -220,8 +227,20 @@  static void pmic_glink_ucsi_notify(struct work_struct *work)
 	}
 
 	con_num = UCSI_CCI_CONNECTOR(cci);
-	if (con_num)
+	if (con_num) {
+		if (con_num < PMIC_GLINK_MAX_PORTS &&
+		    ucsi->port_orientation[con_num - 1]) {
+			int orientation = gpiod_get_value(ucsi->port_orientation[con_num - 1]);
+
+			if (orientation >= 0) {
+				typec_switch_set(ucsi->port_switch[con_num - 1],
+						 orientation ? TYPEC_ORIENTATION_REVERSE
+							     : TYPEC_ORIENTATION_NORMAL);
+			}
+		}
+
 		ucsi_connector_change(ucsi->ucsi, con_num);
+	}
 
 	if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) {
 		ucsi->sync_val = -EBUSY;
@@ -282,6 +301,7 @@  static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 {
 	struct pmic_glink_ucsi *ucsi;
 	struct device *dev = &adev->dev;
+	struct fwnode_handle *fwnode;
 	int ret;
 
 	ucsi = devm_kzalloc(dev, sizeof(*ucsi), GFP_KERNEL);
@@ -309,6 +329,38 @@  static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 
 	ucsi_set_drvdata(ucsi->ucsi, ucsi);
 
+	device_for_each_child_node(dev, fwnode) {
+		struct gpio_desc *desc;
+		u32 port;
+
+		ret = fwnode_property_read_u32(fwnode, "reg", &port);
+		if (ret < 0) {
+			dev_err(dev, "missing reg property of %pOFn\n", fwnode);
+			return ret;
+		}
+
+		if (port >= PMIC_GLINK_MAX_PORTS) {
+			dev_warn(dev, "invalid connector number, ignoring\n");
+			continue;
+		}
+
+		desc = devm_gpiod_get_index_optional(&adev->dev, "orientation", port, GPIOD_IN);
+
+		/* If GPIO isn't found, continue */
+		if (!desc)
+			continue;
+
+		if (IS_ERR(desc))
+			return dev_err_probe(dev, PTR_ERR(desc),
+					     "unable to acquire orientation gpio\n");
+		ucsi->port_orientation[port] = desc;
+
+		ucsi->port_switch[port] = fwnode_typec_switch_get(fwnode);
+		if (IS_ERR(ucsi->port_switch[port]))
+			return dev_err_probe(dev, PTR_ERR(ucsi->port_switch[port]),
+					"failed to acquire orientation-switch\n");
+	}
+
 	ucsi->client = devm_pmic_glink_register_client(dev,
 						       PMIC_GLINK_OWNER_USBC,
 						       pmic_glink_ucsi_callback,