diff mbox series

[v3,1/1] opcodes: microblaze: Add new bit-field instructions

Message ID 20231009125144.377940-1-neal.frager@amd.com
State New
Headers show
Series [v3,1/1] opcodes: microblaze: Add new bit-field instructions | expand

Commit Message

Frager, Neal Oct. 9, 2023, 12:51 p.m. UTC
This patches adds new bsefi and bsifi instructions.
BSEFI- The instruction shall extract a bit field from a
register and place it right-adjusted in the destination register.
The other bits in the destination register shall be set to zero.
BSIFI- The instruction shall insert a right-adjusted bit field
from a register at another position in the destination register.
The rest of the bits in the destination register shall be unchanged.

Further documentation of these instructions can be found here:
https://docs.xilinx.com/v/u/en-US/ug984-vivado-microblaze-ref

This patch has been tested for years of AMD Xilinx Yocto
releases as part of the following patch set:

https://github.com/Xilinx/meta-xilinx/tree/master/meta-microblaze/recipes-devtools/binutils/binutils

Signed-off-by: nagaraju <nagaraju.mekala@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
---
V1->V2:
 -corrected relocation values for the linker
V2->V3:
 - fixed build issue for 32-bit hosts
 - added test cases for bsefi and bsifi instructions
---
 bfd/bfd-in2.h                          |   5 +
 bfd/elf32-microblaze.c                 | 127 +++++++++++++++++++------
 bfd/libbfd.h                           |   1 +
 bfd/reloc.c                            |   6 ++
 binutils/readelf.c                     |   4 +
 gas/config/tc-microblaze.c             |  77 ++++++++++++++-
 gas/testsuite/gas/microblaze/allinsn.d |   6 ++
 gas/testsuite/gas/microblaze/allinsn.s |   9 +-
 include/elf/microblaze.h               |   1 +
 opcodes/microblaze-dis.c               |  16 ++++
 opcodes/microblaze-opc.h               |  12 ++-
 opcodes/microblaze-opcm.h              |   6 +-
 12 files changed, 237 insertions(+), 33 deletions(-)

Comments

Michael Eager Oct. 9, 2023, 2:54 p.m. UTC | #1
Neal --

The GNU Coding Standards can be found here:
https://www.gnu.org/prep/standards/

I've made some notes in the patch where there are changes needed.

On 10/9/23 05:51, Neal Frager wrote:
> This patches adds new bsefi and bsifi instructions.
> BSEFI- The instruction shall extract a bit field from a
> register and place it right-adjusted in the destination register.
> The other bits in the destination register shall be set to zero.
> BSIFI- The instruction shall insert a right-adjusted bit field
> from a register at another position in the destination register.
> The rest of the bits in the destination register shall be unchanged.
> 
> Further documentation of these instructions can be found here:
> https://docs.xilinx.com/v/u/en-US/ug984-vivado-microblaze-ref
> 
> This patch has been tested for years of AMD Xilinx Yocto
> releases as part of the following patch set:
> 
> https://github.com/Xilinx/meta-xilinx/tree/master/meta-microblaze/recipes-devtools/binutils/binutils
> 
> Signed-off-by: nagaraju <nagaraju.mekala@amd.com>
> Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
> Signed-off-by: Neal Frager <neal.frager@amd.com>
> ---
> V1->V2:
>   -corrected relocation values for the linker
> V2->V3:
>   - fixed build issue for 32-bit hosts
>   - added test cases for bsefi and bsifi instructions
> ---
>   bfd/bfd-in2.h                          |   5 +
>   bfd/elf32-microblaze.c                 | 127 +++++++++++++++++++------
>   bfd/libbfd.h                           |   1 +
>   bfd/reloc.c                            |   6 ++
>   binutils/readelf.c                     |   4 +
>   gas/config/tc-microblaze.c             |  77 ++++++++++++++-
>   gas/testsuite/gas/microblaze/allinsn.d |   6 ++
>   gas/testsuite/gas/microblaze/allinsn.s |   9 +-
>   include/elf/microblaze.h               |   1 +
>   opcodes/microblaze-dis.c               |  16 ++++
>   opcodes/microblaze-opc.h               |  12 ++-
>   opcodes/microblaze-opcm.h              |   6 +-
>   12 files changed, 237 insertions(+), 33 deletions(-)
> 
> diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h
> index eddb9902f5e..468e14af262 100644
> --- a/bfd/bfd-in2.h
> +++ b/bfd/bfd-in2.h
> @@ -6461,6 +6461,11 @@ value relative to the read-write small data area anchor  */
>   expressions of the form "Symbol Op Symbol"  */
>     BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
>   
> +/* This is a 32 bit reloc that stores the 32 bit pc relative
> +value in two words (with an imm instruction).No relocation is
> +done here - only used for relaxing  */
> +  BFD_RELOC_MICROBLAZE_32_NONE,
> +
>   /* This is a 64 bit reloc that stores the 32 bit pc relative
>   value in two words (with an imm instruction).  No relocation is
>   done here - only used for relaxing  */
> diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
> index a7e81c70fc8..760b3236810 100644
> --- a/bfd/elf32-microblaze.c
> +++ b/bfd/elf32-microblaze.c
> @@ -174,6 +174,21 @@ static reloc_howto_type microblaze_elf_howto_raw[] =
>   	  0x0000ffff,		/* Dest Mask.  */
>   	  false),		/* PC relative offset?  */
>   
> +   /* This reloc does nothing.	Used for relaxation.  */
> +   HOWTO (R_MICROBLAZE_32_NONE,	/* Type.  */
> +          0,			/* Rightshift.  */
> +          2,			/* Size (0 = byte, 1 = short, 2 = long).  */
> +          32,			/* Bitsize.  */
> +          true,			/* PC_relative.  */
> +          0,			/* Bitpos.  */
> +          complain_overflow_bitfield,  /* Complain on overflow.  */
> +          NULL,                  /* Special Function.  */
> +          "R_MICROBLAZE_32_NONE",/* Name.  */
> +          false,		/* Partial Inplace.  */
> +          0,			/* Source Mask.  */
> +          0,			/* Dest Mask.  */
> +          false),		/* PC relative offset?  */
> +

Use leading tabs, not spaces.

>      /* This reloc does nothing.	Used for relaxation.  */
>      HOWTO (R_MICROBLAZE_64_NONE,	/* Type.  */
>   	  0,			/* Rightshift.  */
> @@ -560,6 +575,9 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
>       case BFD_RELOC_NONE:
>         microblaze_reloc = R_MICROBLAZE_NONE;
>         break;
> +    case BFD_RELOC_MICROBLAZE_32_NONE:
> +      microblaze_reloc = R_MICROBLAZE_32_NONE;
> +      break;
>       case BFD_RELOC_MICROBLAZE_64_NONE:
>         microblaze_reloc = R_MICROBLAZE_64_NONE;
>         break;
> @@ -1954,18 +1972,26 @@ microblaze_elf_relax_section (bfd *abfd,
>   		}
>   	      break;
>   	    case R_MICROBLAZE_NONE:
> +	    case R_MICROBLAZE_32_NONE:
>   	      {
>   		/* This was a PC-relative instruction that was
>   		   completely resolved.  */
>   		size_t sfix, efix;
> +		unsigned int val;
>   		bfd_vma target_address;
>   		target_address = irel->r_addend + irel->r_offset;
>   		sfix = calc_fixup (irel->r_offset, 0, sec);
>   		efix = calc_fixup (target_address, 0, sec);
> -		irel->r_addend -= (efix - sfix);
> -		/* Should use HOWTO.  */
> -		microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
> -						   irel->r_addend);
> +
> +                /* Validate the in-band val.  */
> +                val = bfd_get_32 (abfd, contents + irel->r_offset);
> +                if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) {

Left brace on next line.

> +                    fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, (unsigned long) irel->r_addend);

Wrap lines which are longer than 80 characters.

Function calls have a space between function name (fprintf) and argument 
list.

> +                }
> +	        irel->r_addend -= (efix - sfix);
> +	        /* Should use HOWTO.  */
> +	        microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
> +	                                           irel->r_addend);
>   	      }
>   	      break;
>   	    case R_MICROBLAZE_64_NONE:
> @@ -2009,31 +2035,74 @@ microblaze_elf_relax_section (bfd *abfd,
>   	  irelscanend = irelocs + o->reloc_count;
>   	  for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
>   	    {
> -	      if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
> -		{
> -		  isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
> +              if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE)
> +                {
> +                  unsigned int val;
> +
> +                  isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
> +
> +                  /* hax: We only do the following fixup for debug location lists.  */
> +                  if (strcmp(".debug_loc", o->name))
> +                    continue;
> +
> +                  /* This was a PC-relative instruction that was completely resolved.  */
> +                  if (ocontents == NULL)
> +                    {
> +		      if (elf_section_data (o)->this_hdr.contents != NULL)
> +		          ocontents = elf_section_data (o)->this_hdr.contents;
> +		      else
> +		        {
> +		          /* We always cache the section contents.
> +			     Perhaps, if info->keep_memory is FALSE, we
> +			     should free them, if we are permitted to.  */
> +
> +		          if (o->rawsize == 0)
> +			      o->rawsize = o->size;
> +		          ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
> +		          if (ocontents == NULL)
> +			      goto error_return;
> +		          if (!bfd_get_section_contents (abfd, o, ocontents,
> +                                                         (file_ptr) 0,
> +                                                         o->rawsize))
> +                              goto error_return;
> +		          elf_section_data (o)->this_hdr.contents = ocontents;
> +		        }
> +		    }
>   
> -		  /* Look at the reloc only if the value has been resolved.  */
> -		  if (isym->st_shndx == shndx
> -		      && (ELF32_ST_TYPE (isym->st_info) == STT_SECTION))
> -		    {
> -		      if (ocontents == NULL)
> -			{
> -			  if (elf_section_data (o)->this_hdr.contents != NULL)
> -			    ocontents = elf_section_data (o)->this_hdr.contents;
> -			  else
> -			    {
> -			      /* We always cache the section contents.
> -				 Perhaps, if info->keep_memory is FALSE, we
> -				 should free them, if we are permitted to.  */
> -			      if (o->rawsize == 0)
> -				o->rawsize = o->size;
> -			      ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
> -			      if (ocontents == NULL)
> -				goto error_return;
> -			      if (!bfd_get_section_contents (abfd, o, ocontents,
> -							     (file_ptr) 0,
> -							     o->rawsize))
> +                  val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
> +                  if (val != irelscan->r_addend) {
> +			fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, (unsigned long) irelscan->r_addend);
> +                  }
> +
> +                  irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec);
> +                  microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset,
> +                                                     irelscan->r_addend);
> +              }
> +              if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
> +                {
> +	          isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
> +
> +                  /* Look at the reloc only if the value has been resolved.  */
> +                  if (isym->st_shndx == shndx
> +                      && (ELF32_ST_TYPE (isym->st_info) == STT_SECTION))
> +                    {
> +                      if (ocontents == NULL)
> +                        {
> +                          if (elf_section_data (o)->this_hdr.contents != NULL)
> +                            ocontents = elf_section_data (o)->this_hdr.contents;
> +                          else
> +                            {
> +                              /* We always cache the section contents.
> +                                 Perhaps, if info->keep_memory is FALSE, we
> +                                 should free them, if we are permitted to.  */
> +		              if (o->rawsize == 0)
> +			        o->rawsize = o->size;
> +                              ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
> +                              if (ocontents == NULL)
> +                                goto error_return;
> +                              if (!bfd_get_section_contents (abfd, o, ocontents,
> +                                                             (file_ptr) 0,
> + 							      o->rawsize))
>   				goto error_return;
>   			      elf_section_data (o)->this_hdr.contents = ocontents;
>   			    }
> @@ -2068,7 +2137,7 @@ microblaze_elf_relax_section (bfd *abfd,
>   			      elf_section_data (o)->this_hdr.contents = ocontents;
>   			    }
>   			}
> -		      irelscan->r_addend -= calc_fixup (irel->r_addend
> +		      irelscan->r_addend -= calc_fixup (irelscan->r_addend
>   							+ isym->st_value,
>   							0,
>   							sec);
> diff --git a/bfd/libbfd.h b/bfd/libbfd.h
> index d5f42f22c08..d729dc48e7c 100644
> --- a/bfd/libbfd.h
> +++ b/bfd/libbfd.h
> @@ -3010,6 +3010,7 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@",
>     "BFD_RELOC_MICROBLAZE_32_ROSDA",
>     "BFD_RELOC_MICROBLAZE_32_RWSDA",
>     "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM",
> +  "BFD_RELOC_MICROBLAZE_32_NONE",
>     "BFD_RELOC_MICROBLAZE_64_NONE",
>     "BFD_RELOC_MICROBLAZE_64_GOTPC",
>     "BFD_RELOC_MICROBLAZE_64_GOT",
> diff --git a/bfd/reloc.c b/bfd/reloc.c
> index 2ac883d0eac..3ea2afc0d4e 100644
> --- a/bfd/reloc.c
> +++ b/bfd/reloc.c
> @@ -6694,6 +6694,12 @@ ENUM
>   ENUMDOC
>     This is a 32 bit reloc for the microblaze to handle
>     expressions of the form "Symbol Op Symbol"
> +ENUM
> +  BFD_RELOC_MICROBLAZE_32_NONE
> +ENUMDOC
> +  This is a 32 bit reloc that stores the 32 bit pc relative
> +  value in two words (with an imm instruction).  No relocation is
> +  done here - only used for relaxing
>   ENUM
>     BFD_RELOC_MICROBLAZE_64_NONE
>   ENUMDOC
> diff --git a/binutils/readelf.c b/binutils/readelf.c
> index c9b6210e229..57ac46e92b2 100644
> --- a/binutils/readelf.c
> +++ b/binutils/readelf.c
> @@ -15279,6 +15279,10 @@ is_8bit_abs_reloc (Filedata * filedata, unsigned int reloc_type)
>         return reloc_type == 54; /* R_RISCV_SET8.  */
>       case EM_Z80:
>         return reloc_type == 1;  /* R_Z80_8.  */
> +    case EM_MICROBLAZE:
> +      return reloc_type == 33 /* R_MICROBLAZE_32_NONE.  */
> +             || reloc_type == 0 /* R_MICROBLAZE_NONE.  */
> +             || reloc_type == 9; /* R_MICROBLAZE_64_NONE.  */
>       default:
>         return false;
>       }
> diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
> index d900a9e1d05..1d378633422 100644
> --- a/gas/config/tc-microblaze.c
> +++ b/gas/config/tc-microblaze.c
> @@ -915,7 +915,7 @@ md_assemble (char * str)
>     unsigned reg2;
>     unsigned reg3;
>     unsigned isize;
> -  unsigned int immed = 0, temp;
> +  unsigned int immed = 0, immed2 = 0, temp;
>     expressionS exp;
>     char name[20];
>   
> @@ -1177,6 +1177,77 @@ md_assemble (char * str)
>         inst |= (immed << IMM_LOW) & IMM5_MASK;
>         break;
>   
> +    case INST_TYPE_RD_R1_IMM5_IMM5:
> +      if (strcmp (op_end, ""))
> +        op_end = parse_reg (op_end + 1, &reg1);  /* Get rd.  */
> +      else
> +	{
> +          as_fatal (_("Error in statement syntax"));
> +          reg1 = 0;
> +        }
> +      if (strcmp (op_end, ""))
> +        op_end = parse_reg (op_end + 1, &reg2);  /* Get r1.  */
> +      else
> +	{
> +          as_fatal (_("Error in statement syntax"));
> +          reg2 = 0;
> +        }
> +
> +      /* Check for spl registers.  */
> +      if (check_spl_reg (&reg1))
> +        as_fatal (_("Cannot use special register with this instruction"));
> +      if (check_spl_reg (&reg2))
> +        as_fatal (_("Cannot use special register with this instruction"));
> +
> +      /* Width immediate value.  */
> +      if (strcmp (op_end, ""))
> +        op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
> +      else
> +        as_fatal (_("Error in statement syntax"));
> +      if (exp.X_op != O_constant)
> +	{
> +          as_warn (_("Symbol used as immediate width value for bit field instruction"));
> +          immed = 1;
> +        }
> +      else
> +        immed = exp.X_add_number;
> +      if (opcode->instr == bsefi && immed > 31)
> +        as_fatal (_("Width value must be less than 32"));
> +
> +      /* Shift immediate value.  */
> +      if (strcmp (op_end, ""))
> +        op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
> +      else
> +        as_fatal (_("Error in statement syntax"));
> +      if (exp.X_op != O_constant)
> +	    {
> +          as_warn (_("Symbol used as immediate shift value for bit field instruction"));
> +          immed2 = 0;
> +        }
> +      else
> +	    {
> +          output = frag_more (isize);
> +          immed2 = exp.X_add_number;
> +	    }
> +      if (immed2 != (immed2 % 32))
> +	    {
> +          as_warn (_("Shift value greater than 32. using <value %% 32>"));
> +          immed2 = immed2 % 32;
> +        }
> +
> +      /* Check combined value.  */
> +      if (immed + immed2 > 32)
> +        as_fatal (_("Width value + shift value must not be greater than 32"));
> +
> +      inst |= (reg1 << RD_LOW) & RD_MASK;
> +      inst |= (reg2 << RA_LOW) & RA_MASK;
> +      if (opcode->instr == bsefi)
> +        inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
> +      else
> +        inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
> +      inst |= (immed2 << IMM_LOW) & IMM5_MASK;
> +      break;
> +
>       case INST_TYPE_R1_R2:
>         if (strcmp (op_end, ""))
>           op_end = parse_reg (op_end + 1, &reg1);  /* Get r1.  */
> @@ -2209,9 +2280,12 @@ md_apply_fix (fixS *   fixP,
>   	 moves code around due to relaxing.  */
>         if (fixP->fx_r_type == BFD_RELOC_64_PCREL)
>   	fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
> +      else if (fixP->fx_r_type == BFD_RELOC_32)
> +	fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE;
>         else
>   	fixP->fx_r_type = BFD_RELOC_NONE;
>         fixP->fx_addsy = section_symbol (absolute_section);
> +      fixP->fx_done = 0;
>       }
>     return;
>   }
> @@ -2432,6 +2506,7 @@ tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp)
>     switch (fixp->fx_r_type)
>       {
>       case BFD_RELOC_NONE:
> +    case BFD_RELOC_MICROBLAZE_32_NONE:
>       case BFD_RELOC_MICROBLAZE_64_NONE:
>       case BFD_RELOC_32:
>       case BFD_RELOC_MICROBLAZE_32_LO:
> diff --git a/gas/testsuite/gas/microblaze/allinsn.d b/gas/testsuite/gas/microblaze/allinsn.d
> index b454fdb30fc..c2cfb0fb528 100644
> --- a/gas/testsuite/gas/microblaze/allinsn.d
> +++ b/gas/testsuite/gas/microblaze/allinsn.d
> @@ -47,3 +47,9 @@ Disassembly of section .text:
>   
>   00000040 <swaph>:
>     40:	900001e2 	swaph	r0, r0
> +
> +00000044 <bsefi>:
> +  44:   64004000 	bsefi	r0, r0
> +
> +00000048 <bsifi>:
> +  48:   64008000	bsifi	r0, r0
> diff --git a/gas/testsuite/gas/microblaze/allinsn.s b/gas/testsuite/gas/microblaze/allinsn.s
> index ffe91ca8eb0..3679c0ceb7c 100644
> --- a/gas/testsuite/gas/microblaze/allinsn.s
> +++ b/gas/testsuite/gas/microblaze/allinsn.s
> @@ -54,4 +54,11 @@ swapb:
>       .global swaph
>   swaph:
>       swaph r0,r0
> -
> +    .text
> +    .global bsefi
> +bsefi:
> +    bsefi r0,r0
> +    .text
> +    .global bsifi
> +bsifi:
> +    bsifi r0,r0
> diff --git a/include/elf/microblaze.h b/include/elf/microblaze.h
> index fecdd7e4831..164b36d0978 100644
> --- a/include/elf/microblaze.h
> +++ b/include/elf/microblaze.h
> @@ -61,6 +61,7 @@ START_RELOC_NUMBERS (elf_microblaze_reloc_type)
>     RELOC_NUMBER (R_MICROBLAZE_TEXTPCREL_64, 30)  /* PC-relative TEXT offset.  */
>     RELOC_NUMBER (R_MICROBLAZE_TEXTREL_64, 31)    /* TEXT Entry offset 64-bit.  */
>     RELOC_NUMBER (R_MICROBLAZE_TEXTREL_32_LO, 32) /* TEXT Entry offset 32-bit.  */
> +  RELOC_NUMBER (R_MICROBLAZE_32_NONE, 33)
>   END_RELOC_NUMBERS (R_MICROBLAZE_max)
>   
>   /* Global base address names.  */
> diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c
> index 12981abfea1..9d602e1d9a9 100644
> --- a/opcodes/microblaze-dis.c
> +++ b/opcodes/microblaze-dis.c
> @@ -90,6 +90,18 @@ get_field_imm5_mbar (struct string_buf *buf, long instr)
>     return p;
>   }
>   
> +static char *
> +get_field_imm5width (struct string_buf *buf, long instr)
> +{
> +  char *p = strbuf (buf);
> +
> +  if (instr & 0x00004000)
> +    sprintf (p, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
> +  else
> +    sprintf (p, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */

Line length.

> +  return p;
> +}
> +
>   static char *
>   get_field_rfsl (struct string_buf *buf, long instr)
>   {
> @@ -426,6 +438,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
>   	  break;
>   	  /* For mbar 16 or sleep insn.  */
>   	case INST_TYPE_NONE:
> +	  break;
> +	  /* For bit field insns.  */
> +	case INST_TYPE_RD_R1_IMM5_IMM5:
> +	  print_func (stream, "\t%s, %s, %s, %s", get_field_rd (&buf, inst),get_field_r1(&buf, inst),get_field_imm5width (&buf, inst), get_field_imm5 (&buf, inst));

Line length.

>   	  break;
>   	  /* For tuqula instruction */
>   	case INST_TYPE_RD:
> diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
> index 7398e9e246a..96829653488 100644
> --- a/opcodes/microblaze-opc.h
> +++ b/opcodes/microblaze-opc.h
> @@ -59,6 +59,9 @@
>   /* For mbar.  */
>   #define INST_TYPE_IMM5 20
>   
> +/* For bsefi and bsifi */
> +#define INST_TYPE_RD_R1_IMM5_IMM5  21
> +
>   #define INST_TYPE_NONE 25
>   
>   
> @@ -89,7 +92,9 @@
>   #define OPCODE_MASK_H124  0xFFFF07FF /* High 16, and low 11 bits.  */
>   #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits.  */
>   #define OPCODE_MASK_H3    0xFC000600 /* High 6 bits and bits 21, 22.  */
> +#define OPCODE_MASK_H3B   0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22.  */
>   #define OPCODE_MASK_H32   0xFC00FC00 /* High 6 bits and bit 16-21.  */
> +#define OPCODE_MASK_H32B  0xFC00C000 /* High 6 bits and bit 16, 17.  */
>   #define OPCODE_MASK_H34B  0xFC0000FF /* High 6 bits and low 8 bits.  */
>   #define OPCODE_MASK_H35B  0xFC0004FF /* High 6 bits and low 9 bits.  */
>   #define OPCODE_MASK_H34C  0xFC0007E0 /* High 6 bits and bits 21-26.  */
> @@ -102,7 +107,7 @@
>   #define DELAY_SLOT 1
>   #define NO_DELAY_SLOT 0
>   
> -#define MAX_OPCODES 300
> +#define MAX_OPCODES 301
>   
>   const struct op_code_struct
>   {
> @@ -159,6 +164,8 @@ const struct op_code_struct
>     {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
>     {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
>     {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
> +  {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
> +  {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
>     {"or",    INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
>     {"and",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
>     {"xor",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
> @@ -438,5 +445,8 @@ char pvr_register_prefix[] = "rpvr";
>   #define MIN_IMM5  ((int) 0x00000000)
>   #define MAX_IMM5  ((int) 0x0000001f)
>   
> +#define MIN_IMM_WIDTH  ((int) 0x00000001)
> +#define MAX_IMM_WIDTH  ((int) 0x00000020)
> +
>   #endif /* MICROBLAZE_OPC */
>   
> diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
> index c91b002d951..3c4f8948c76 100644
> --- a/opcodes/microblaze-opcm.h
> +++ b/opcodes/microblaze-opcm.h
> @@ -29,7 +29,7 @@ enum microblaze_instr
>     addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
>     mulh, mulhu, mulhsu, swapb, swaph,
>     idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
> -  ncget, ncput, muli, bslli, bsrai, bsrli, mului,
> +  ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
>     /* 'or/and/xor' are C++ keywords.  */
>     microblaze_or, microblaze_and, microblaze_xor,
>     andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
> @@ -130,6 +130,7 @@ enum microblaze_instr_type
>   #define RB_LOW  11 /* Low bit for RB.  */
>   #define IMM_LOW  0 /* Low bit for immediate.  */
>   #define IMM_MBAR 21 /* low bit for mbar instruction.  */
> +#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
>   
>   #define RD_MASK 0x03E00000
>   #define RA_MASK 0x001F0000
> @@ -142,6 +143,9 @@ enum microblaze_instr_type
>   /* Imm mask for mbar.  */
>   #define IMM5_MBAR_MASK 0x03E00000
>   
> +/* Imm mask for extract/insert width. */
> +#define IMM5_WIDTH_MASK 0x000007C0
> +
>   /* FSL imm mask for get, put instructions.  */
>   #define  RFSL_MASK 0x000000F
>
diff mbox series

Patch

diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h
index eddb9902f5e..468e14af262 100644
--- a/bfd/bfd-in2.h
+++ b/bfd/bfd-in2.h
@@ -6461,6 +6461,11 @@  value relative to the read-write small data area anchor  */
 expressions of the form "Symbol Op Symbol"  */
   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
 
+/* This is a 32 bit reloc that stores the 32 bit pc relative
+value in two words (with an imm instruction).No relocation is 
+done here - only used for relaxing  */
+  BFD_RELOC_MICROBLAZE_32_NONE,
+
 /* This is a 64 bit reloc that stores the 32 bit pc relative
 value in two words (with an imm instruction).  No relocation is
 done here - only used for relaxing  */
diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
index a7e81c70fc8..760b3236810 100644
--- a/bfd/elf32-microblaze.c
+++ b/bfd/elf32-microblaze.c
@@ -174,6 +174,21 @@  static reloc_howto_type microblaze_elf_howto_raw[] =
 	  0x0000ffff,		/* Dest Mask.  */
 	  false),		/* PC relative offset?  */
 
+   /* This reloc does nothing.	Used for relaxation.  */
+   HOWTO (R_MICROBLAZE_32_NONE,	/* Type.  */
+          0,			/* Rightshift.  */
+          2,			/* Size (0 = byte, 1 = short, 2 = long).  */
+          32,			/* Bitsize.  */
+          true,			/* PC_relative.  */
+          0,			/* Bitpos.  */
+          complain_overflow_bitfield,  /* Complain on overflow.  */
+          NULL,                  /* Special Function.  */
+          "R_MICROBLAZE_32_NONE",/* Name.  */
+          false,		/* Partial Inplace.  */
+          0,			/* Source Mask.  */
+          0,			/* Dest Mask.  */
+          false),		/* PC relative offset?  */
+
    /* This reloc does nothing.	Used for relaxation.  */
    HOWTO (R_MICROBLAZE_64_NONE,	/* Type.  */
 	  0,			/* Rightshift.  */
@@ -560,6 +575,9 @@  microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
     case BFD_RELOC_NONE:
       microblaze_reloc = R_MICROBLAZE_NONE;
       break;
+    case BFD_RELOC_MICROBLAZE_32_NONE:
+      microblaze_reloc = R_MICROBLAZE_32_NONE;
+      break;
     case BFD_RELOC_MICROBLAZE_64_NONE:
       microblaze_reloc = R_MICROBLAZE_64_NONE;
       break;
@@ -1954,18 +1972,26 @@  microblaze_elf_relax_section (bfd *abfd,
 		}
 	      break;
 	    case R_MICROBLAZE_NONE:
+	    case R_MICROBLAZE_32_NONE:
 	      {
 		/* This was a PC-relative instruction that was
 		   completely resolved.  */
 		size_t sfix, efix;
+		unsigned int val;
 		bfd_vma target_address;
 		target_address = irel->r_addend + irel->r_offset;
 		sfix = calc_fixup (irel->r_offset, 0, sec);
 		efix = calc_fixup (target_address, 0, sec);
-		irel->r_addend -= (efix - sfix);
-		/* Should use HOWTO.  */
-		microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
-						   irel->r_addend);
+
+                /* Validate the in-band val.  */
+                val = bfd_get_32 (abfd, contents + irel->r_offset);
+                if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) {
+                    fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, (unsigned long) irel->r_addend);
+                }
+	        irel->r_addend -= (efix - sfix);
+	        /* Should use HOWTO.  */
+	        microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
+	                                           irel->r_addend);
 	      }
 	      break;
 	    case R_MICROBLAZE_64_NONE:
@@ -2009,31 +2035,74 @@  microblaze_elf_relax_section (bfd *abfd,
 	  irelscanend = irelocs + o->reloc_count;
 	  for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
 	    {
-	      if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
-		{
-		  isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
+              if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE)
+                {
+                  unsigned int val;
+
+                  isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
+
+                  /* hax: We only do the following fixup for debug location lists.  */
+                  if (strcmp(".debug_loc", o->name))
+                    continue;
+
+                  /* This was a PC-relative instruction that was completely resolved.  */
+                  if (ocontents == NULL)
+                    {
+		      if (elf_section_data (o)->this_hdr.contents != NULL)
+		          ocontents = elf_section_data (o)->this_hdr.contents;
+		      else
+		        {
+		          /* We always cache the section contents.
+			     Perhaps, if info->keep_memory is FALSE, we
+			     should free them, if we are permitted to.  */
+
+		          if (o->rawsize == 0)
+			      o->rawsize = o->size;
+		          ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
+		          if (ocontents == NULL)
+			      goto error_return;
+		          if (!bfd_get_section_contents (abfd, o, ocontents,
+                                                         (file_ptr) 0,
+                                                         o->rawsize))
+                              goto error_return;
+		          elf_section_data (o)->this_hdr.contents = ocontents;
+		        }
+		    }
 
-		  /* Look at the reloc only if the value has been resolved.  */
-		  if (isym->st_shndx == shndx
-		      && (ELF32_ST_TYPE (isym->st_info) == STT_SECTION))
-		    {
-		      if (ocontents == NULL)
-			{
-			  if (elf_section_data (o)->this_hdr.contents != NULL)
-			    ocontents = elf_section_data (o)->this_hdr.contents;
-			  else
-			    {
-			      /* We always cache the section contents.
-				 Perhaps, if info->keep_memory is FALSE, we
-				 should free them, if we are permitted to.  */
-			      if (o->rawsize == 0)
-				o->rawsize = o->size;
-			      ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
-			      if (ocontents == NULL)
-				goto error_return;
-			      if (!bfd_get_section_contents (abfd, o, ocontents,
-							     (file_ptr) 0,
-							     o->rawsize))
+                  val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
+                  if (val != irelscan->r_addend) {
+			fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, (unsigned long) irelscan->r_addend);
+                  }
+
+                  irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec);
+                  microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset,
+                                                     irelscan->r_addend);
+              }
+              if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
+                {
+	          isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
+
+                  /* Look at the reloc only if the value has been resolved.  */
+                  if (isym->st_shndx == shndx
+                      && (ELF32_ST_TYPE (isym->st_info) == STT_SECTION))
+                    {
+                      if (ocontents == NULL)
+                        {
+                          if (elf_section_data (o)->this_hdr.contents != NULL)
+                            ocontents = elf_section_data (o)->this_hdr.contents;
+                          else
+                            {
+                              /* We always cache the section contents.
+                                 Perhaps, if info->keep_memory is FALSE, we
+                                 should free them, if we are permitted to.  */
+		              if (o->rawsize == 0)
+			        o->rawsize = o->size;
+                              ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
+                              if (ocontents == NULL)
+                                goto error_return;
+                              if (!bfd_get_section_contents (abfd, o, ocontents,
+                                                             (file_ptr) 0,
+ 							      o->rawsize))
 				goto error_return;
 			      elf_section_data (o)->this_hdr.contents = ocontents;
 			    }
@@ -2068,7 +2137,7 @@  microblaze_elf_relax_section (bfd *abfd,
 			      elf_section_data (o)->this_hdr.contents = ocontents;
 			    }
 			}
-		      irelscan->r_addend -= calc_fixup (irel->r_addend
+		      irelscan->r_addend -= calc_fixup (irelscan->r_addend
 							+ isym->st_value,
 							0,
 							sec);
diff --git a/bfd/libbfd.h b/bfd/libbfd.h
index d5f42f22c08..d729dc48e7c 100644
--- a/bfd/libbfd.h
+++ b/bfd/libbfd.h
@@ -3010,6 +3010,7 @@  static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@",
   "BFD_RELOC_MICROBLAZE_32_ROSDA",
   "BFD_RELOC_MICROBLAZE_32_RWSDA",
   "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM",
+  "BFD_RELOC_MICROBLAZE_32_NONE",
   "BFD_RELOC_MICROBLAZE_64_NONE",
   "BFD_RELOC_MICROBLAZE_64_GOTPC",
   "BFD_RELOC_MICROBLAZE_64_GOT",
diff --git a/bfd/reloc.c b/bfd/reloc.c
index 2ac883d0eac..3ea2afc0d4e 100644
--- a/bfd/reloc.c
+++ b/bfd/reloc.c
@@ -6694,6 +6694,12 @@  ENUM
 ENUMDOC
   This is a 32 bit reloc for the microblaze to handle
   expressions of the form "Symbol Op Symbol"
+ENUM
+  BFD_RELOC_MICROBLAZE_32_NONE
+ENUMDOC
+  This is a 32 bit reloc that stores the 32 bit pc relative
+  value in two words (with an imm instruction).  No relocation is
+  done here - only used for relaxing
 ENUM
   BFD_RELOC_MICROBLAZE_64_NONE
 ENUMDOC
diff --git a/binutils/readelf.c b/binutils/readelf.c
index c9b6210e229..57ac46e92b2 100644
--- a/binutils/readelf.c
+++ b/binutils/readelf.c
@@ -15279,6 +15279,10 @@  is_8bit_abs_reloc (Filedata * filedata, unsigned int reloc_type)
       return reloc_type == 54; /* R_RISCV_SET8.  */
     case EM_Z80:
       return reloc_type == 1;  /* R_Z80_8.  */
+    case EM_MICROBLAZE:
+      return reloc_type == 33 /* R_MICROBLAZE_32_NONE.  */
+             || reloc_type == 0 /* R_MICROBLAZE_NONE.  */
+             || reloc_type == 9; /* R_MICROBLAZE_64_NONE.  */
     default:
       return false;
     }
diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
index d900a9e1d05..1d378633422 100644
--- a/gas/config/tc-microblaze.c
+++ b/gas/config/tc-microblaze.c
@@ -915,7 +915,7 @@  md_assemble (char * str)
   unsigned reg2;
   unsigned reg3;
   unsigned isize;
-  unsigned int immed = 0, temp;
+  unsigned int immed = 0, immed2 = 0, temp;
   expressionS exp;
   char name[20];
 
@@ -1177,6 +1177,77 @@  md_assemble (char * str)
       inst |= (immed << IMM_LOW) & IMM5_MASK;
       break;
 
+    case INST_TYPE_RD_R1_IMM5_IMM5:
+      if (strcmp (op_end, ""))
+        op_end = parse_reg (op_end + 1, &reg1);  /* Get rd.  */
+      else
+	{
+          as_fatal (_("Error in statement syntax"));
+          reg1 = 0;
+        }
+      if (strcmp (op_end, ""))
+        op_end = parse_reg (op_end + 1, &reg2);  /* Get r1.  */
+      else
+	{
+          as_fatal (_("Error in statement syntax"));
+          reg2 = 0;
+        }
+
+      /* Check for spl registers.  */
+      if (check_spl_reg (&reg1))
+        as_fatal (_("Cannot use special register with this instruction"));
+      if (check_spl_reg (&reg2))
+        as_fatal (_("Cannot use special register with this instruction"));
+ 
+      /* Width immediate value.  */
+      if (strcmp (op_end, ""))
+        op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
+      else
+        as_fatal (_("Error in statement syntax"));
+      if (exp.X_op != O_constant)
+	{
+          as_warn (_("Symbol used as immediate width value for bit field instruction"));
+          immed = 1;
+        }
+      else
+        immed = exp.X_add_number;
+      if (opcode->instr == bsefi && immed > 31)
+        as_fatal (_("Width value must be less than 32"));
+
+      /* Shift immediate value.  */
+      if (strcmp (op_end, ""))
+        op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
+      else
+        as_fatal (_("Error in statement syntax"));
+      if (exp.X_op != O_constant)
+	    {
+          as_warn (_("Symbol used as immediate shift value for bit field instruction"));
+          immed2 = 0;
+        }
+      else
+	    {
+          output = frag_more (isize);
+          immed2 = exp.X_add_number;
+	    }
+      if (immed2 != (immed2 % 32))
+	    {
+          as_warn (_("Shift value greater than 32. using <value %% 32>"));
+          immed2 = immed2 % 32;
+        }
+
+      /* Check combined value.  */
+      if (immed + immed2 > 32)
+        as_fatal (_("Width value + shift value must not be greater than 32"));
+
+      inst |= (reg1 << RD_LOW) & RD_MASK;
+      inst |= (reg2 << RA_LOW) & RA_MASK;
+      if (opcode->instr == bsefi)
+        inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
+      else
+        inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
+      inst |= (immed2 << IMM_LOW) & IMM5_MASK;
+      break;
+
     case INST_TYPE_R1_R2:
       if (strcmp (op_end, ""))
         op_end = parse_reg (op_end + 1, &reg1);  /* Get r1.  */
@@ -2209,9 +2280,12 @@  md_apply_fix (fixS *   fixP,
 	 moves code around due to relaxing.  */
       if (fixP->fx_r_type == BFD_RELOC_64_PCREL)
 	fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
+      else if (fixP->fx_r_type == BFD_RELOC_32)
+	fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE;
       else
 	fixP->fx_r_type = BFD_RELOC_NONE;
       fixP->fx_addsy = section_symbol (absolute_section);
+      fixP->fx_done = 0;
     }
   return;
 }
@@ -2432,6 +2506,7 @@  tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp)
   switch (fixp->fx_r_type)
     {
     case BFD_RELOC_NONE:
+    case BFD_RELOC_MICROBLAZE_32_NONE:
     case BFD_RELOC_MICROBLAZE_64_NONE:
     case BFD_RELOC_32:
     case BFD_RELOC_MICROBLAZE_32_LO:
diff --git a/gas/testsuite/gas/microblaze/allinsn.d b/gas/testsuite/gas/microblaze/allinsn.d
index b454fdb30fc..c2cfb0fb528 100644
--- a/gas/testsuite/gas/microblaze/allinsn.d
+++ b/gas/testsuite/gas/microblaze/allinsn.d
@@ -47,3 +47,9 @@  Disassembly of section .text:
 
 00000040 <swaph>:
   40:	900001e2 	swaph	r0, r0
+  
+00000044 <bsefi>:
+  44:   64004000 	bsefi	r0, r0
+  
+00000048 <bsifi>:
+  48:   64008000	bsifi	r0, r0
diff --git a/gas/testsuite/gas/microblaze/allinsn.s b/gas/testsuite/gas/microblaze/allinsn.s
index ffe91ca8eb0..3679c0ceb7c 100644
--- a/gas/testsuite/gas/microblaze/allinsn.s
+++ b/gas/testsuite/gas/microblaze/allinsn.s
@@ -54,4 +54,11 @@  swapb:
     .global swaph
 swaph:
     swaph r0,r0
-
+    .text
+    .global bsefi
+bsefi:
+    bsefi r0,r0
+    .text
+    .global bsifi
+bsifi:
+    bsifi r0,r0
diff --git a/include/elf/microblaze.h b/include/elf/microblaze.h
index fecdd7e4831..164b36d0978 100644
--- a/include/elf/microblaze.h
+++ b/include/elf/microblaze.h
@@ -61,6 +61,7 @@  START_RELOC_NUMBERS (elf_microblaze_reloc_type)
   RELOC_NUMBER (R_MICROBLAZE_TEXTPCREL_64, 30)  /* PC-relative TEXT offset.  */
   RELOC_NUMBER (R_MICROBLAZE_TEXTREL_64, 31)    /* TEXT Entry offset 64-bit.  */
   RELOC_NUMBER (R_MICROBLAZE_TEXTREL_32_LO, 32) /* TEXT Entry offset 32-bit.  */
+  RELOC_NUMBER (R_MICROBLAZE_32_NONE, 33)
 END_RELOC_NUMBERS (R_MICROBLAZE_max)
 
 /* Global base address names.  */
diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c
index 12981abfea1..9d602e1d9a9 100644
--- a/opcodes/microblaze-dis.c
+++ b/opcodes/microblaze-dis.c
@@ -90,6 +90,18 @@  get_field_imm5_mbar (struct string_buf *buf, long instr)
   return p;
 }
 
+static char *
+get_field_imm5width (struct string_buf *buf, long instr)
+{
+  char *p = strbuf (buf);
+
+  if (instr & 0x00004000)
+    sprintf (p, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
+  else
+    sprintf (p, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
+  return p;
+}
+
 static char *
 get_field_rfsl (struct string_buf *buf, long instr)
 {
@@ -426,6 +438,10 @@  print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
 	  break;
 	  /* For mbar 16 or sleep insn.  */
 	case INST_TYPE_NONE:
+	  break;
+	  /* For bit field insns.  */
+	case INST_TYPE_RD_R1_IMM5_IMM5:
+	  print_func (stream, "\t%s, %s, %s, %s", get_field_rd (&buf, inst),get_field_r1(&buf, inst),get_field_imm5width (&buf, inst), get_field_imm5 (&buf, inst));
 	  break;
 	  /* For tuqula instruction */
 	case INST_TYPE_RD:
diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
index 7398e9e246a..96829653488 100644
--- a/opcodes/microblaze-opc.h
+++ b/opcodes/microblaze-opc.h
@@ -59,6 +59,9 @@ 
 /* For mbar.  */
 #define INST_TYPE_IMM5 20
 
+/* For bsefi and bsifi */
+#define INST_TYPE_RD_R1_IMM5_IMM5  21
+
 #define INST_TYPE_NONE 25
 
 
@@ -89,7 +92,9 @@ 
 #define OPCODE_MASK_H124  0xFFFF07FF /* High 16, and low 11 bits.  */
 #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits.  */
 #define OPCODE_MASK_H3    0xFC000600 /* High 6 bits and bits 21, 22.  */
+#define OPCODE_MASK_H3B   0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22.  */
 #define OPCODE_MASK_H32   0xFC00FC00 /* High 6 bits and bit 16-21.  */
+#define OPCODE_MASK_H32B  0xFC00C000 /* High 6 bits and bit 16, 17.  */
 #define OPCODE_MASK_H34B  0xFC0000FF /* High 6 bits and low 8 bits.  */
 #define OPCODE_MASK_H35B  0xFC0004FF /* High 6 bits and low 9 bits.  */
 #define OPCODE_MASK_H34C  0xFC0007E0 /* High 6 bits and bits 21-26.  */
@@ -102,7 +107,7 @@ 
 #define DELAY_SLOT 1
 #define NO_DELAY_SLOT 0
 
-#define MAX_OPCODES 300
+#define MAX_OPCODES 301
 
 const struct op_code_struct
 {
@@ -159,6 +164,8 @@  const struct op_code_struct
   {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
   {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
   {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
+  {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
+  {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },  
   {"or",    INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
   {"and",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
   {"xor",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
@@ -438,5 +445,8 @@  char pvr_register_prefix[] = "rpvr";
 #define MIN_IMM5  ((int) 0x00000000)
 #define MAX_IMM5  ((int) 0x0000001f)
 
+#define MIN_IMM_WIDTH  ((int) 0x00000001)
+#define MAX_IMM_WIDTH  ((int) 0x00000020)
+
 #endif /* MICROBLAZE_OPC */
 
diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
index c91b002d951..3c4f8948c76 100644
--- a/opcodes/microblaze-opcm.h
+++ b/opcodes/microblaze-opcm.h
@@ -29,7 +29,7 @@  enum microblaze_instr
   addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
   mulh, mulhu, mulhsu, swapb, swaph,
   idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
-  ncget, ncput, muli, bslli, bsrai, bsrli, mului,
+  ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
   /* 'or/and/xor' are C++ keywords.  */
   microblaze_or, microblaze_and, microblaze_xor,
   andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
@@ -130,6 +130,7 @@  enum microblaze_instr_type
 #define RB_LOW  11 /* Low bit for RB.  */
 #define IMM_LOW  0 /* Low bit for immediate.  */
 #define IMM_MBAR 21 /* low bit for mbar instruction.  */
+#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
 
 #define RD_MASK 0x03E00000
 #define RA_MASK 0x001F0000
@@ -142,6 +143,9 @@  enum microblaze_instr_type
 /* Imm mask for mbar.  */
 #define IMM5_MBAR_MASK 0x03E00000
 
+/* Imm mask for extract/insert width. */
+#define IMM5_WIDTH_MASK 0x000007C0
+
 /* FSL imm mask for get, put instructions.  */
 #define  RFSL_MASK 0x000000F