diff mbox series

[v3,1/3] dt-bindings: usb: add rk3588 compatible to rockchip,dwc3

Message ID 20231009172129.43568-2-sebastian.reichel@collabora.com
State Accepted
Commit 98bad5bc447ec962988a48c92f7d0f8c4dc473d2
Headers show
Series RK3588 USB3 host controller support | expand

Commit Message

Sebastian Reichel Oct. 9, 2023, 5:20 p.m. UTC
RK3588 has three DWC3 controllers. Two of them are fully functional in
host, device and OTG mode including USB2 support. They are connected to
dedicated PHYs, that also support USB-C's DisplayPort alternate mode.

The third controller is connected to one of the combphy's shared
with PCIe and SATA. It can only be used in host mode and does not
support USB2. Compared to the other controllers this one needs
some extra clocks.

While adding the extra clocks required by RK3588, I noticed grf_clk
is not available on RK3568, so I disallowed it for that platform.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../bindings/usb/rockchip,dwc3.yaml           | 66 +++++++++++++++++--
 1 file changed, 61 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
index 291844c8f3e1..517879290099 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -20,9 +20,6 @@  description:
   Type-C PHY
   Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
 
-allOf:
-  - $ref: snps,dwc3.yaml#
-
 select:
   properties:
     compatible:
@@ -30,6 +27,7 @@  select:
         enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3568-dwc3
+          - rockchip,rk3588-dwc3
   required:
     - compatible
 
@@ -39,6 +37,7 @@  properties:
       - enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3568-dwc3
+          - rockchip,rk3588-dwc3
       - const: snps,dwc3
 
   reg:
@@ -58,7 +57,9 @@  properties:
           Master/Core clock, must to be >= 62.5 MHz for SS
           operation and >= 30MHz for HS operation
       - description:
-          Controller grf clock
+          Controller grf clock OR UTMI clock
+      - description:
+          PIPE clock
 
   clock-names:
     minItems: 3
@@ -66,7 +67,10 @@  properties:
       - const: ref_clk
       - const: suspend_clk
       - const: bus_clk
-      - const: grf_clk
+      - enum:
+          - grf_clk
+          - utmi
+      - const: pipe
 
   power-domains:
     maxItems: 1
@@ -86,6 +90,58 @@  required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: snps,dwc3.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          minItems: 3
+          items:
+            - const: ref_clk
+            - const: suspend_clk
+            - const: bus_clk
+            - const: grf_clk
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: ref_clk
+            - const: suspend_clk
+            - const: bus_clk
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 5
+        clock-names:
+          minItems: 3
+          items:
+            - const: ref_clk
+            - const: suspend_clk
+            - const: bus_clk
+            - const: utmi
+            - const: pipe
+
 examples:
   - |
     #include <dt-bindings/clock/rk3328-cru.h>