new file mode 100644
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Solomon OLED Display Controllers
+
+maintainers:
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ # Only required for SPI
+ dc-gpios:
+ description:
+ GPIO connected to the controller's D/C# (Data/Command) pin,
+ that is needed for 4-wire SPI to tell the controller if the
+ data sent is for a command register or the display data RAM
+ maxItems: 1
+
+ solomon,height:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Height in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+ solomon,width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Width in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: true
@@ -27,38 +27,12 @@ properties:
- solomon,ssd1307
- solomon,ssd1309
- reg:
- maxItems: 1
-
pwms:
maxItems: 1
- reset-gpios:
- maxItems: 1
-
- # Only required for SPI
- dc-gpios:
- description:
- GPIO connected to the controller's D/C# (Data/Command) pin,
- that is needed for 4-wire SPI to tell the controller if the
- data sent is for a command register or the display data RAM
- maxItems: 1
-
vbat-supply:
description: The supply for VBAT
- solomon,height:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Height in pixel of the screen driven by the controller.
- The default value is controller-dependent.
-
- solomon,width:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Width in pixel of the screen driven by the controller.
- The default value is controller-dependent.
-
solomon,page-offset:
$ref: /schemas/types.yaml#/definitions/uint32
default: 1
@@ -148,7 +122,7 @@ required:
- reg
allOf:
- - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - $ref: solomon,ssd-common.yaml#
- if:
properties:
@@ -6732,6 +6732,7 @@ DRM DRIVER FOR SOLOMON SSD130X OLED DISPLAYS
M: Javier Martinez Canillas <javierm@redhat.com>
S: Maintained
T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
F: Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
F: drivers/gpu/drm/solomon/ssd130x*