diff mbox series

[2/2] wifi: ath12k: Enable Mesh support for QCN9274

Message ID 20231013070007.25597-2-quic_rgnanase@quicinc.com
State New
Headers show
Series wifi: ath12k: EHT mesh support | expand

Commit Message

Ramya Gnanasekar Oct. 13, 2023, 7 a.m. UTC 
Currently QCN9274 supports only AP and station interface modes.

Add interface type mesh to ath12k_hw_params for
QCN9274 to provide support for mesh mode as well.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/hw.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index f69649f58e82..ac2106fa8b56 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -886,7 +886,8 @@  static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.vdev_start_delay = false,
 
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
-					BIT(NL80211_IFTYPE_AP),
+					BIT(NL80211_IFTYPE_AP) |
+					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = false,
 
 		.idle_ps = false,
@@ -1006,7 +1007,8 @@  static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.vdev_start_delay = false,
 
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
-					BIT(NL80211_IFTYPE_AP),
+					BIT(NL80211_IFTYPE_AP) |
+					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = false,
 
 		.idle_ps = false,