diff mbox series

[5/5] arm64: dts: rockchip: add support for Powkiddy RGB30

Message ID 20231013183918.225666-6-macroalpha82@gmail.com
State New
Headers show
Series Add Support for RK3566 Powkiddy RGB30 | expand

Commit Message

Chris Morgan Oct. 13, 2023, 6:39 p.m. UTC
From: Chris Morgan <macromorgan@hotmail.com>

The Powkiddy RGB30 is a portable game device based on the Rockchip
RK3566 SoC. It has GPIO buttons on the face and sides for input, stereo
speakers, a 720x720 4 inch DSI display, a USB-C host port and a USB-C
peripheral port, dual SD card slots, WiFi, Bluetooth, and 1GB of RAM.

Working/Tested:
- SDMMC
- UART (for debugging)
- Buttons
- Charging/battery/PMIC
- Speaker/Headphones
- USB
- WiFi
- Bluetooth
- Display (at 59.04hz)

Not Working/TODO:
- Display does not resume from suspend properly. I'm working with the
  manufacturer to resolve this.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3566-powkiddy-rgb30.dts    | 152 ++++++++++++++++++
 2 files changed, 153 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index e7728007fd1b..3f01b429a3aa 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -77,6 +77,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
new file mode 100644
index 000000000000..c7828c99a1bb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
@@ -0,0 +1,152 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RGB30";
+	compatible = "powkiddy,rgb30", "rockchip,rk3566";
+
+	aliases {
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4250000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
+					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
+					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
+					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
+					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
+					<3400000 0>;
+	};
+
+	/*
+	 * Channels reversed for speakers. Headphones automatically switch via hardware when
+	 * detected with no ability to control output in software. Headphones appear to be mono
+	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
+	 */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+/delete-node/ &adc_keys;
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <108000000>;
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+/delete-node/ &{/i2c@fdd40000/regulator@40};
+
+&i2c0 {
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+/*
+ * Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as
+ * red_led0 and red_led1.
+ */
+/delete-node/ &{/pwm-leds/led-1};
+/delete-node/ &{/pwm-leds/led-2};
+
+&leds {
+	red_led0: led-1 {
+		color = <LED_COLOR_ID_RED>;
+		function = LED_FUNCTION_CHARGING;
+		max-brightness = <255>;
+		pwms = <&pwm7 0 25000 0>;
+	};
+
+	red_led1: led-2 {
+		color = <LED_COLOR_ID_RED>;
+		default-state = "off";
+		function = LED_FUNCTION_STATUS;
+		max-brightness = <255>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+};
+
+&panel {
+	compatible = "powkiddy,rgb30-panel";
+	vcc-supply = <&vcc3v3_lcd0_n>;
+	iovcc-supply = <&vcc3v3_lcd0_n>;
+	/delete-property/ vdd-supply;
+};
+
+&pwm5 {
+	status = "disabled";
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+/delete-node/ &vibrator;