diff mbox

[v2,3/3] ARM: dts: keystone-k2g: Add DSP GPIO controller node

Message ID 20160809143306.25028-4-afd@ti.com
State Accepted
Commit e0f0b54c026c9665cbb88303481a0f984190e056
Headers show

Commit Message

Andrew Davis Aug. 9, 2016, 2:33 p.m. UTC 
Add the DSP GPIO controller node on K2G SoC.
This is used to send interrupts to the only DSP processor
subsystem present on the SoC. The IP is identical to that
of the equivalent nodes on existing K2 SoCs.

Signed-off-by: Andrew F. Davis <afd@ti.com>

Signed-off-by: Suman Anna <s-anna@ti.com>

---
 arch/arm/boot/dts/keystone-k2g.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

-- 
2.9.2
diff mbox

Patch

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index eccda9c..025ad12 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -106,5 +106,12 @@ 
 			#interrupt-cells = <1>;
 			ti,syscon-dev = <&devctrl 0x2a0>;
 		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
 	};
 };