diff mbox series

[15/19] xhci: Enable RPM on controllers that support low-power states

Message ID 20231019102924.2797346-16-mathias.nyman@linux.intel.com
State New
Headers show
Series xhci features for usb-next | expand

Commit Message

Mathias Nyman Oct. 19, 2023, 10:29 a.m. UTC 
From: Basavaraj Natikar <Basavaraj.Natikar@amd.com>

Use the low-power states of the underlying platform to enable runtime PM.
If the platform doesn't support runtime D3, then enabling default RPM will
result in the controller malfunctioning, as in the case of hotplug devices
not being detected because of a failed interrupt generation.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-pci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index bde43cef8846..95ed9404f6f8 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -695,7 +695,9 @@  static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
 	pm_runtime_put_noidle(&dev->dev);
 
-	if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
+	if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
+		pm_runtime_forbid(&dev->dev);
+	else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
 		pm_runtime_allow(&dev->dev);
 
 	dma_set_max_seg_size(&dev->dev, UINT_MAX);