diff mbox series

usb: musb: Check requset->buf before use to avoid crash issue

Message ID 20231023093153.6748-1-xingxing.luo@unisoc.com
State Superseded
Headers show
Series usb: musb: Check requset->buf before use to avoid crash issue | expand

Commit Message

Xingxing Luo Oct. 23, 2023, 9:31 a.m. UTC
When connecting USB to PC, there is a very low probability of kernel
crash. The reason is that in ep0_txstate(), the buf member of struct
usb_request used may be a null pointer. Therefore, it needs to
determine whether it is null before using it.

[ 4888.071462][T597@C0] Call trace:
[ 4888.071467][T597@C0]  musb_default_write_fifo+0xa0/0x1ac [musb_hdrc]
[ 4888.087190][T597@C0]  musb_write_fifo+0x3c/0x90 [musb_hdrc]
[ 4888.099826][T597@C0]  ep0_txstate+0x78/0x218 [musb_hdrc]
[ 4888.153918][T597@C0]  musb_g_ep0_irq+0x3c4/0xe10 [musb_hdrc]
[ 4888.159663][T597@C0]  musb_interrupt+0xab4/0xf1c [musb_hdrc]
[ 4888.165391][T597@C0]  sprd_musb_interrupt+0x1e4/0x484 [musb_sprd]
[ 4888.171447][T597@C0]  __handle_irq_event_percpu+0xd8/0x2f8
[ 4888.176901][T597@C0]  handle_irq_event+0x70/0xe4
[ 4888.181487][T597@C0]  handle_fasteoi_irq+0x15c/0x230
[ 4888.186420][T597@C0]  handle_domain_irq+0x88/0xfc
[ 4888.191090][T597@C0]  gic_handle_irq+0x60/0x138
[ 4888.195591][T597@C0]  call_on_irq_stack+0x40/0x70
[ 4888.200263][T597@C0]  do_interrupt_handler+0x50/0xac
[ 4888.205196][T597@C0]  el1_interrupt+0x34/0x64
[ 4888.209524][T597@C0]  el1h_64_irq_handler+0x1c/0x2c
[ 4888.214370][T597@C0]  el1h_64_irq+0x7c/0x80
[ 4888.218525][T597@C0]  __check_heap_object+0x1ac/0x1fc
[ 4888.223544][T597@C0]  __check_object_size+0x10c/0x20c
[ 4888.228563][T597@C0]  simple_copy_to_iter+0x40/0x74
[ 4888.233410][T597@C0]  __skb_datagram_iter+0xa0/0x310
[ 4888.238343][T597@C0]  skb_copy_datagram_iter+0x44/0x110
[ 4888.243535][T597@C0]  netlink_recvmsg+0xdc/0x364
[ 4888.248123][T597@C0]  ____sys_recvmsg.llvm.16749613423860851707+0x358/0x6c0
[ 4888.255045][T597@C0]  ___sys_recvmsg+0xe0/0x1dc
[ 4888.259544][T597@C0]  __arm64_sys_recvmsg+0xc4/0x10c
[ 4888.264478][T597@C0]  invoke_syscall+0x6c/0x15c
[ 4888.268976][T597@C0]  el0_svc_common.llvm.12373701176611417606+0xd4/0x120
[ 4888.275726][T597@C0]  do_el0_svc+0x34/0xac
[ 4888.279795][T597@C0]  el0_svc+0x28/0x90
[ 4888.283603][T597@C0]  el0t_64_sync_handler+0x88/0xec
[ 4888.288548][T597@C0]  el0t_64_sync+0x1b4/0x1b8
[ 4888.292956][T597@C0] Code: 540002c3 53027ea8 aa1303e9 71000508 (b840452a)
[ 4888.299789][T597@C0] ---[ end trace 14a301b7253e83cc ]---

Signed-off-by: Xingxing Luo <xingxing.luo@unisoc.com>
---
 drivers/usb/musb/musb_gadget_ep0.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

kernel test robot Oct. 28, 2023, 3:30 p.m. UTC | #1
Hi Xingxing,

kernel test robot noticed the following build errors:

[auto build test ERROR on usb/usb-testing]
[also build test ERROR on usb/usb-next usb/usb-linus linus/master v6.6-rc7 next-20231027]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Xingxing-Luo/usb-musb-Check-requset-buf-before-use-to-avoid-crash-issue/20231023-173938
base:   https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
patch link:    https://lore.kernel.org/r/20231023093153.6748-1-xingxing.luo%40unisoc.com
patch subject: [PATCH] usb: musb: Check requset->buf before use to avoid crash issue
config: arm-davinci_all_defconfig (https://download.01.org/0day-ci/archive/20231028/202310282331.d4wx1Z6b-lkp@intel.com/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project.git 4a5ac14ee968ff0ad5d2cc1ffa0299048db4c88a)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231028/202310282331.d4wx1Z6b-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202310282331.d4wx1Z6b-lkp@intel.com/

All errors (new ones prefixed by >>):

>> drivers/usb/musb/musb_gadget_ep0.c:534:7: error: use of undeclared identifier 'requset'; did you mean 'request'?
     534 |         if (!requset->buf) {
         |              ^~~~~~~
         |              request
   drivers/usb/musb/musb_gadget_ep0.c:521:22: note: 'request' declared here
     521 |         struct usb_request      *request;
         |                                  ^
   1 error generated.

Kconfig warnings: (for reference only)
   WARNING: unmet direct dependencies detected for PINCTRL_SINGLE
   Depends on [n]: PINCTRL [=n] && OF [=y] && HAS_IOMEM [=y]
   Selected by [y]:
   - ARCH_DAVINCI [=y] && ARCH_MULTI_V5 [=y] && CPU_LITTLE_ENDIAN [=y]


vim +534 drivers/usb/musb/musb_gadget_ep0.c

   510	
   511	/*
   512	 * transmitting to the host (IN), this code might be called from IRQ
   513	 * and from kernel thread.
   514	 *
   515	 * Context:  caller holds controller lock
   516	 */
   517	static void ep0_txstate(struct musb *musb)
   518	{
   519		void __iomem		*regs = musb->control_ep->regs;
   520		struct musb_request	*req = next_ep0_request(musb);
   521		struct usb_request	*request;
   522		u16			csr = MUSB_CSR0_TXPKTRDY;
   523		u8			*fifo_src;
   524		u8			fifo_count;
   525	
   526		if (!req) {
   527			/* WARN_ON(1); */
   528			musb_dbg(musb, "odd; csr0 %04x", musb_readw(regs, MUSB_CSR0));
   529			return;
   530		}
   531	
   532		request = &req->request;
   533	
 > 534		if (!requset->buf) {
   535			musb_dbg(musb, "request->buf is NULL");
   536			return;
   537		}
   538	
   539		/* load the data */
   540		fifo_src = (u8 *) request->buf + request->actual;
   541		fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
   542			request->length - request->actual);
   543		musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
   544		request->actual += fifo_count;
   545	
   546		/* update the flags */
   547		if (fifo_count < MUSB_MAX_END0_PACKET
   548				|| (request->actual == request->length
   549					&& !request->zero)) {
   550			musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
   551			csr |= MUSB_CSR0_P_DATAEND;
   552		} else
   553			request = NULL;
   554	
   555		/* report completions as soon as the fifo's loaded; there's no
   556		 * win in waiting till this last packet gets acked.  (other than
   557		 * very precise fault reporting, needed by USB TMC; possible with
   558		 * this hardware, but not usable from portable gadget drivers.)
   559		 */
   560		if (request) {
   561			musb->ackpend = csr;
   562			musb_g_ep0_giveback(musb, request);
   563			if (!musb->ackpend)
   564				return;
   565			musb->ackpend = 0;
   566		}
   567	
   568		/* send it out, triggering a "txpktrdy cleared" irq */
   569		musb_ep_select(musb->mregs, 0);
   570		musb_writew(regs, MUSB_CSR0, csr);
   571	}
   572
xingxing luo Oct. 30, 2023, 1:52 a.m. UTC | #2
On Fri, Oct 27, 2023 at 6:54 PM Greg KH <gregkh@linuxfoundation.org> wrote:
>
> On Mon, Oct 23, 2023 at 05:31:53PM +0800, Xingxing Luo wrote:
> > When connecting USB to PC, there is a very low probability of kernel
> > crash. The reason is that in ep0_txstate(), the buf member of struct
> > usb_request used may be a null pointer. Therefore, it needs to
> > determine whether it is null before using it.
> >
> > [ 4888.071462][T597@C0] Call trace:
> > [ 4888.071467][T597@C0]  musb_default_write_fifo+0xa0/0x1ac [musb_hdrc]
> > [ 4888.087190][T597@C0]  musb_write_fifo+0x3c/0x90 [musb_hdrc]
> > [ 4888.099826][T597@C0]  ep0_txstate+0x78/0x218 [musb_hdrc]
> > [ 4888.153918][T597@C0]  musb_g_ep0_irq+0x3c4/0xe10 [musb_hdrc]
> > [ 4888.159663][T597@C0]  musb_interrupt+0xab4/0xf1c [musb_hdrc]
> > [ 4888.165391][T597@C0]  sprd_musb_interrupt+0x1e4/0x484 [musb_sprd]
> > [ 4888.171447][T597@C0]  __handle_irq_event_percpu+0xd8/0x2f8
> > [ 4888.176901][T597@C0]  handle_irq_event+0x70/0xe4
> > [ 4888.181487][T597@C0]  handle_fasteoi_irq+0x15c/0x230
> > [ 4888.186420][T597@C0]  handle_domain_irq+0x88/0xfc
> > [ 4888.191090][T597@C0]  gic_handle_irq+0x60/0x138
> > [ 4888.195591][T597@C0]  call_on_irq_stack+0x40/0x70
> > [ 4888.200263][T597@C0]  do_interrupt_handler+0x50/0xac
> > [ 4888.205196][T597@C0]  el1_interrupt+0x34/0x64
> > [ 4888.209524][T597@C0]  el1h_64_irq_handler+0x1c/0x2c
> > [ 4888.214370][T597@C0]  el1h_64_irq+0x7c/0x80
> > [ 4888.218525][T597@C0]  __check_heap_object+0x1ac/0x1fc
> > [ 4888.223544][T597@C0]  __check_object_size+0x10c/0x20c
> > [ 4888.228563][T597@C0]  simple_copy_to_iter+0x40/0x74
> > [ 4888.233410][T597@C0]  __skb_datagram_iter+0xa0/0x310
> > [ 4888.238343][T597@C0]  skb_copy_datagram_iter+0x44/0x110
> > [ 4888.243535][T597@C0]  netlink_recvmsg+0xdc/0x364
> > [ 4888.248123][T597@C0]  ____sys_recvmsg.llvm.16749613423860851707+0x358/0x6c0
> > [ 4888.255045][T597@C0]  ___sys_recvmsg+0xe0/0x1dc
> > [ 4888.259544][T597@C0]  __arm64_sys_recvmsg+0xc4/0x10c
> > [ 4888.264478][T597@C0]  invoke_syscall+0x6c/0x15c
> > [ 4888.268976][T597@C0]  el0_svc_common.llvm.12373701176611417606+0xd4/0x120
> > [ 4888.275726][T597@C0]  do_el0_svc+0x34/0xac
> > [ 4888.279795][T597@C0]  el0_svc+0x28/0x90
> > [ 4888.283603][T597@C0]  el0t_64_sync_handler+0x88/0xec
> > [ 4888.288548][T597@C0]  el0t_64_sync+0x1b4/0x1b8
> > [ 4888.292956][T597@C0] Code: 540002c3 53027ea8 aa1303e9 71000508 (b840452a)
> > [ 4888.299789][T597@C0] ---[ end trace 14a301b7253e83cc ]---
> >
> > Signed-off-by: Xingxing Luo <xingxing.luo@unisoc.com>
> > ---
> >  drivers/usb/musb/musb_gadget_ep0.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
> > index 6d7336727388..5d0629866128 100644
> > --- a/drivers/usb/musb/musb_gadget_ep0.c
> > +++ b/drivers/usb/musb/musb_gadget_ep0.c
> > @@ -531,6 +531,11 @@ static void ep0_txstate(struct musb *musb)
> >
> >       request = &req->request;
> >
> > +     if (!requset->buf) {
> > +             musb_dbg(musb, "request->buf is NULL");
> > +             return;
> > +     }
> > +
> >       /* load the data */
> >       fifo_src = (u8 *) request->buf + request->actual;
> >       fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
> > --
> > 2.17.1
>
> This patch does not even build, how did you test it?
>

I have verified this patch on our platform, which is unisoc, and it
can fix the kernel crash problem. However, it seems that there is a
spelling error in this patch, I will fix it in the next version.

> And what commit id does this fix?

commit id: 550a7375fe720924241f0eb76e4a5c1a3eb8c32f

>
> thanks,
>
> greg k-h
diff mbox series

Patch

diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 6d7336727388..5d0629866128 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -531,6 +531,11 @@  static void ep0_txstate(struct musb *musb)
 
 	request = &req->request;
 
+	if (!requset->buf) {
+		musb_dbg(musb, "request->buf is NULL");
+		return;
+	}
+
 	/* load the data */
 	fifo_src = (u8 *) request->buf + request->actual;
 	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,