diff mbox

gpio: dt-bindings: remove ti,tps65086-gpio binding

Message ID 20160811184013.2499-1-afd@ti.com
State Accepted
Commit ccb3611f5ac7db5e350a00e80d1b64d87789c984
Headers show

Commit Message

Andrew Davis Aug. 11, 2016, 6:40 p.m. UTC
This binding is no longer correct, the GPIO information can should be
added to the parent node and not into this child node. See
Documentation/devicetree/bindings/mfd/tps65086.txt for the correct usage.

Signed-off-by: Andrew F. Davis <afd@ti.com>

---
 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt | 16 ----------------
 1 file changed, 16 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt

-- 
2.9.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Linus Walleij Aug. 19, 2016, 8:57 a.m. UTC | #1
On Thu, Aug 11, 2016 at 8:40 PM, Andrew F. Davis <afd@ti.com> wrote:

> This binding is no longer correct, the GPIO information can should be

> added to the parent node and not into this child node. See

> Documentation/devicetree/bindings/mfd/tps65086.txt for the correct usage.

>

> Signed-off-by: Andrew F. Davis <afd@ti.com>


Patch applied.
Thanks for helping to keep the kernel clean!

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
deleted file mode 100644
index ba05107..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
+++ /dev/null
@@ -1,16 +0,0 @@ 
-* TPS65086 GPO Controller bindings
-
-Required properties:
- - compatible		: Should be "ti,tps65086-gpio".
- - gpio-controller	: Marks the device node as a GPIO Controller.
- - #gpio-cells		: Should be two. The first cell is the pin number
-			    and the second cell is used to specify flags.
-			    See ../gpio/gpio.txt for possible values.
-
-Example:
-
-	gpio4: gpio {
-		compatible = "ti,tps65086-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};