diff mbox series

[v2,1/1] dt-bindings: backlight: mp3309c: remove two required properties

Message ID 20231025155057.886823-2-f.suligoi@asem.it
State Superseded
Headers show
Series dt-bindings: backlight: mp3309c: remove two required properties | expand

Commit Message

Flavio Suligoi Oct. 25, 2023, 3:50 p.m. UTC
The two properties:

- max-brightness
- default brightness

are not really required, so they can be removed from the "required"
section.
The "max-brightness" is no longer used in the current version
of the driver (it was used only in the first version).
The "default-brightness", if omitted in the DT, is managed by the
device driver, using a default value. This value depends on the dimming
mode used:

- for the "analog mode", via I2C commands, this value is fixed by
  hardware (=31)
- while in case of pwm mode the default used is the last value of the
  brightness-levels array.

Also the brightness-levels array is not required:

- in "analog mode", via I2C commands, the brightness-level array is
  fixed by hardware (0..31).;
- in pwm dimming mode, the driver uses a default array of 0..255 and
  the "default-brightness" is the last one, which is "255"

NOTE: there are no compatibility problems with the previous version,
      since the device driver has not yet been included in any kernel.
      Only this dt-binding yaml file is already included in the
      "for-backlight-next" branch of the "backlight" kernel repository.
      No developer may have used it.

Other changes:

- improve the backlight working mode description, in the "description"
  section
- update the example, removing the "max-brightness" and introducing the
  "brightess-levels" property

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
---
 .../bindings/leds/backlight/mps,mp3309c.yaml           | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

Comments

Conor Dooley Oct. 26, 2023, 2:57 p.m. UTC | #1
On Wed, Oct 25, 2023 at 05:50:57PM +0200, Flavio Suligoi wrote:
> The two properties:
> 
> - max-brightness
> - default brightness
> 
> are not really required, so they can be removed from the "required"
> section.
> The "max-brightness" is no longer used in the current version
> of the driver (it was used only in the first version).
> The "default-brightness", if omitted in the DT, is managed by the
> device driver, using a default value. This value depends on the dimming
> mode used:
> 
> - for the "analog mode", via I2C commands, this value is fixed by
>   hardware (=31)
> - while in case of pwm mode the default used is the last value of the
>   brightness-levels array.
> 
> Also the brightness-levels array is not required:
> 
> - in "analog mode", via I2C commands, the brightness-level array is
>   fixed by hardware (0..31).;
> - in pwm dimming mode, the driver uses a default array of 0..255 and
>   the "default-brightness" is the last one, which is "255"
> 

> NOTE: there are no compatibility problems with the previous version,
>       since the device driver has not yet been included in any kernel.
>       Only this dt-binding yaml file is already included in the
>       "for-backlight-next" branch of the "backlight" kernel repository.
>       No developer may have used it.

I'd argue
Fixes: 02c4e661658f ("dt-bindings: backlight: Add MPS MP3309C")
but that's up to Lee.
Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

> 
> Other changes:
> 
> - improve the backlight working mode description, in the "description"
>   section
> - update the example, removing the "max-brightness" and introducing the
>   "brightess-levels" property
> 
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
>  .../bindings/leds/backlight/mps,mp3309c.yaml           | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> index 4191e33626f5..527a37368ed7 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> @@ -14,8 +14,8 @@ description: |
>    programmable switching frequency to optimize efficiency.
>    It supports two different dimming modes:
>  
> -  - analog mode, via I2C commands (default)
> -  - PWM controlled mode.
> +  - analog mode, via I2C commands, as default mode (32 dimming levels)
> +  - PWM controlled mode (optional)
>  
>    The datasheet is available at:
>    https://www.monolithicpower.com/en/mp3309c.html
> @@ -50,8 +50,6 @@ properties:
>  required:
>    - compatible
>    - reg
> -  - max-brightness
> -  - default-brightness
>  
>  unevaluatedProperties: false
>  
> @@ -66,8 +64,8 @@ examples:
>              compatible = "mps,mp3309c";
>              reg = <0x17>;
>              pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> -            max-brightness = <100>;
> -            default-brightness = <80>;
> +            brightness-levels = <0 4 8 16 32 64 128 255>;
> +            default-brightness = <6>;
>              mps,overvoltage-protection-microvolt = <24000000>;
>          };
>      };
> -- 
> 2.34.1
>
Daniel Thompson Nov. 13, 2023, 2:43 p.m. UTC | #2
On Wed, Oct 25, 2023 at 05:50:57PM +0200, Flavio Suligoi wrote:
> NOTE: there are no compatibility problems with the previous version,
>       since the device driver has not yet been included in any kernel.
>       Only this dt-binding yaml file is already included in the
>       "for-backlight-next" branch of the "backlight" kernel repository.
>       No developer may have used it.

I'm afraid I got confused by the fragmented MP3309C patches from all the
different patchsets.

Please can you rebase whatever is left on v6.7-rc1 and send a single
patchset with all pending changes as a single patch set.


Thanks

Daniel.
Flavio Suligoi Nov. 13, 2023, 3:28 p.m. UTC | #3
Hi Daniel,

> On Wed, Oct 25, 2023 at 05:50:57PM +0200, Flavio Suligoi wrote:
> > NOTE: there are no compatibility problems with the previous version,
> >       since the device driver has not yet been included in any kernel.
> >       Only this dt-binding yaml file is already included in the
> >       "for-backlight-next" branch of the "backlight" kernel repository.
> >       No developer may have used it.
> 
> I'm afraid I got confused by the fragmented MP3309C patches from all the
> different patchsets.
> 
> Please can you rebase whatever is left on v6.7-rc1 and send a single patchset
> with all pending changes as a single patch set.
> 

No problem, I'll do it!

> 
> Thanks
> 
> Daniel.

Regards,
Flavio
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
index 4191e33626f5..527a37368ed7 100644
--- a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
@@ -14,8 +14,8 @@  description: |
   programmable switching frequency to optimize efficiency.
   It supports two different dimming modes:
 
-  - analog mode, via I2C commands (default)
-  - PWM controlled mode.
+  - analog mode, via I2C commands, as default mode (32 dimming levels)
+  - PWM controlled mode (optional)
 
   The datasheet is available at:
   https://www.monolithicpower.com/en/mp3309c.html
@@ -50,8 +50,6 @@  properties:
 required:
   - compatible
   - reg
-  - max-brightness
-  - default-brightness
 
 unevaluatedProperties: false
 
@@ -66,8 +64,8 @@  examples:
             compatible = "mps,mp3309c";
             reg = <0x17>;
             pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
-            max-brightness = <100>;
-            default-brightness = <80>;
+            brightness-levels = <0 4 8 16 32 64 128 255>;
+            default-brightness = <6>;
             mps,overvoltage-protection-microvolt = <24000000>;
         };
     };