diff mbox

[2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile

Message ID 1471335734-26893-2-git-send-email-jun.nie@linaro.org
State Superseded
Headers show

Commit Message

Jun Nie Aug. 16, 2016, 8:22 a.m. UTC
Add device tree support for ZX296718 SoC and evaluation board based on it.
Also document new values.

Signed-off-by: Jun Nie <jun.nie@linaro.org>

---
 Documentation/devicetree/bindings/arm/zte.txt |  24 +++
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/zte/Makefile              |   5 +
 arch/arm64/boot/dts/zte/zx296718.dts          |  21 +++
 arch/arm64/boot/dts/zte/zx296718.dtsi         | 256 ++++++++++++++++++++++++++
 5 files changed, 307 insertions(+)
 create mode 100644 arch/arm64/boot/dts/zte/Makefile
 create mode 100644 arch/arm64/boot/dts/zte/zx296718.dts
 create mode 100644 arch/arm64/boot/dts/zte/zx296718.dtsi

-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Comments

Mark Rutland Aug. 15, 2016, 4:23 p.m. UTC | #1
Hi,

On Tue, Aug 16, 2016 at 04:22:13PM +0800, Jun Nie wrote:
> +		cpu0: cpu@0 {

> +			device_type = "cpu";

> +			compatible = "arm,cortex-a53","arm,armv8";

> +			reg = <0x0 0x0>;

> +			enable-method = "psci";

> +		};

> +

> +		cpu1: cpu@1 {

> +			device_type = "cpu";

> +			compatible = "arm,cortex-a53","arm,armv8";

> +			reg = <0x0 0x1>;

> +			enable-method = "psci";

> +		};

> +

> +		cpu2: cpu@2 {

> +			device_type = "cpu";

> +			compatible = "arm,cortex-a53","arm,armv8";

> +			reg = <0x0 0x2>;

> +			enable-method = "psci";

> +		};

> +

> +		cpu3: cpu@3 {

> +			device_type = "cpu";

> +			compatible = "arm,cortex-a53","arm,armv8";

> +			reg = <0x0 0x3>;

> +			enable-method = "psci";

> +		};


> +		pmu {

> +			compatible = "arm,armv8-pmuv3";

> +			interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;

> +		};


Please use "arm,cortex-a53-pmu" for the PMU compatible string.

> +

> +		psci {

> +			compatible = "arm,psci-1.0";

> +			method = "smc";

> +			cpu_suspend = <0xC4000001>;

> +			cpu_off = <0x84000002>;

> +			cpu_on = <0xC4000003>;

> +			migrate = <0xC4000005>;

> +		};


Given you are PSCI 1.0 compliant, you don't need the function ID properties
here. Please remove them.

Otherwise this generally looks fine.

Thanks,
Mark.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt
index 3ff5c9e..b80790a 100644
--- a/Documentation/devicetree/bindings/arm/zte.txt
+++ b/Documentation/devicetree/bindings/arm/zte.txt
@@ -13,3 +13,27 @@  Low power management required properties:
 
 Bus matrix required properties:
       - compatible = "zte,zx-bus-matrix"
+
+
+---------------------------------------
+-  ZX296718 SoC:
+    Required root node properties:
+      - compatible = "zte,zx296718"
+
+ZX296718 EVB board:
+      - "zte,zx296718-evb"
+
+System management required properties:
+      - compatible = "zte,zx296718-aon-sysctrl"
+      - compatible = "zte,zx296718-sysctrl"
+
+Example:
+aon_sysctrl: aon-sysctrl@116000 {
+	compatible = "zte,zx296718-aon-sysctrl", "syscon";
+	reg = <0x116000 0x1000>;
+};
+
+sysctrl: sysctrl@0x1463000 {
+	compatible = "zte,zx296718-sysctrl", "syscon";
+	reg = <0x1463000 0x1000>;
+};
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 6e199c9..6684f97 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -19,6 +19,7 @@  dts-dirs += socionext
 dts-dirs += sprd
 dts-dirs += xilinx
 dts-dirs += lg
+dts-dirs += zte
 
 subdir-y	:= $(dts-dirs)
 
diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
new file mode 100644
index 0000000..a99640b
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/Makefile
@@ -0,0 +1,5 @@ 
+dtb-$(CONFIG_ARCH_ZX) += zx296718.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/zte/zx296718.dts b/arch/arm64/boot/dts/zte/zx296718.dts
new file mode 100644
index 0000000..046cee3
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/zx296718.dts
@@ -0,0 +1,21 @@ 
+/*
+ * ZTE Ltd. zx296718 Plaform
+ *
+ */
+/dts-v1/;
+#include "zx296718.dtsi"
+
+/ {
+	model = "ZTE zx296718 evaluation board";
+	compatible = "zte,zx296718-evb", "zte,zx296718";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
new file mode 100644
index 0000000..666596f
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -0,0 +1,256 @@ 
+/*
+ * DTS File for ZTE ZX296718 Plaform
+ *
+ * Copyright (c) 2016 ZTE Semiconductor Co., Ltd.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "zte,zx296718";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		osc12m: osc12m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "osc12m";
+		};
+
+		osc24m: osc24m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24m";
+		};
+
+		osc25m: osc25m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+			clock-output-names = "osc25m";
+		};
+
+		clk24k: clk-24k {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000>;
+			clock-output-names = "zte:rtcclk";
+		};
+
+		osc32k: osc32k_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+			clock-output-names = "osc32k";
+		};
+
+		osc60m: osc60m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <60000000>;
+			clock-output-names = "osc60m";
+		};
+
+		osc99m: osc99m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <99000000>;
+			clock-output-names = "osc99m";
+		};
+
+		osc125m: osc125m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+			clock-output-names = "osc125m";
+		};
+
+		osc198m: osc198m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <198000000>;
+			clock-output-names = "osc198m";
+		};
+
+		pll_vga: pll_1073m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1073000000>;
+			clock-output-names = "pll_vga";
+		};
+
+		pll_ddr: pll_932m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <932000000>;
+			clock-output-names = "pll_ddr";
+		};
+
+		pll_mac: pll_1000m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+			clock-output-names = "pll_mac";
+		};
+
+		pll_mm0: pll_1188m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1188000000>;
+			clock-output-names = "pll_mm0";
+		};
+
+		pll_mm1: pll_1296m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1296000000>;
+			clock-output-names = "pll_mm1";
+		};
+
+		pll_audio: pll_884m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <884000000>;
+			clock-output-names = "pll_audio";
+		};
+
+		pll_hsic: pll_960m_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <960000000>;
+			clock-output-names = "pll_hsic";
+		};
+
+		gic: interrupt-controller@2a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			#redistributor-regions = <6>;
+			redistributor-stride = <0x0 0x40000>;
+			interrupt-controller;
+			reg = <0x02a00000 0x10000>,
+			      <0x02b00000 0x20000>,
+			      <0x02b20000 0x20000>,
+			      <0x02b40000 0x20000>,
+			      <0x02b60000 0x20000>,
+			      <0x02b80000 0x20000>,
+			      <0x02ba0000 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		pmu {
+			compatible = "arm,armv8-pmuv3";
+			interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+			cpu_suspend = <0xC4000001>;
+			cpu_off = <0x84000002>;
+			cpu_on = <0xC4000003>;
+			migrate = <0xC4000005>;
+		};
+
+		aon_sysctrl: aon-sysctrl@116000 {
+			compatible = "zte,zx296718-aon-sysctrl", "syscon";
+			reg = <0x116000 0x1000>;
+		};
+
+		sysctrl: sysctrl@0x1463000 {
+			compatible = "zte,zx296718-sysctrl", "syscon";
+			reg = <0x1463000 0x1000>;
+		};
+
+		uart0: uart@11f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			arm,primecell-periphid = <0x001feffe>;
+			reg = <0x11f000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "apb_pclk";
+		};
+
+		dma: dma-controller@01460000 {
+			compatible = "zte,zx296702-dma";
+			reg = <0x01460000 0x1000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "dmaclk";
+			#dma-cells = <1>;
+			dma-channels = <32>;
+			dma-requests = <32>;
+		};
+	};
+};