diff mbox series

[v1] Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test

Message ID 20231030071558.1631825-1-neeraj.sanjaykale@nxp.com
State Superseded
Headers show
Series [v1] Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test | expand

Commit Message

Neeraj Sanjay Kale Oct. 30, 2023, 7:15 a.m. UTC
This fixes the tx timeout issue seen while running a stress test on
btnxpuart for couple of hours, such that the interval between two HCI
commands coincide with the power save timeout value of 2 seconds.

Test procedure using bash script:
<load btnxpuart.ko>
hciconfig hci0 up
//Enable Power Save feature
hcitool -i hci0 cmd 3f 23 02 00 00
while (true)
do
    hciconfig hci0 leadv
    sleep 2
    hciconfig hci0 noleadv
    sleep 2
done

Error log, after adding few more debug prints:
[ 2206.497227] Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00
[ 2206.498239] Bluetooth: hci0: Set UART break: on, status=0
[ 2206.503283] Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled
[ 2206.503299] Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00
Can't set advertise mode on hci0: Connection timed out (110)
[ 2208.514238] Bluetooth: hci0: command 0x200a tx timeout

When the power save mechanism turns on UART break, and btnxpuart_tx_work()
is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE,
which prevents the psdata->work from being scheduled, which is responsible
to turn OFF UART break.

This issue is fixed by adding a ps_lock mutex around UART break on/off as
well as around ps_state read/write.
btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is
PS_STATE_SLEEP, it will first schedule psdata->work, and then it will
reschedule itself once UART break has been turned off and ps_state is
PS_STATE_AWAKE.

Tested above script for 50,000 iterations and TX timeout error was not
observed anymore.

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
---
 drivers/bluetooth/btnxpuart.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index b7e66b7ac570..a68d10771c99 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -126,6 +126,7 @@  struct ps_data {
 	struct hci_dev *hdev;
 	struct work_struct work;
 	struct timer_list ps_timer;
+	struct mutex ps_lock;
 };
 
 struct wakeup_cmd_payload {
@@ -337,6 +338,7 @@  static void ps_control(struct hci_dev *hdev, u8 ps_state)
 	    !test_bit(BTNXPUART_SERDEV_OPEN, &nxpdev->tx_state))
 		return;
 
+	mutex_lock(&psdata->ps_lock);
 	switch (psdata->cur_h2c_wakeupmode) {
 	case WAKEUP_METHOD_DTR:
 		if (ps_state == PS_STATE_AWAKE)
@@ -356,6 +358,8 @@  static void ps_control(struct hci_dev *hdev, u8 ps_state)
 	}
 	if (!status)
 		psdata->ps_state = ps_state;
+	mutex_unlock(&psdata->ps_lock);
+
 	if (ps_state == PS_STATE_AWAKE)
 		btnxpuart_tx_wakeup(nxpdev);
 }
@@ -391,17 +395,25 @@  static void ps_setup(struct hci_dev *hdev)
 
 	psdata->hdev = hdev;
 	INIT_WORK(&psdata->work, ps_work_func);
+	mutex_init(&psdata->ps_lock);
 	timer_setup(&psdata->ps_timer, ps_timeout_func, 0);
 }
 
-static void ps_wakeup(struct btnxpuart_dev *nxpdev)
+static bool ps_wakeup(struct btnxpuart_dev *nxpdev)
 {
 	struct ps_data *psdata = &nxpdev->psdata;
+	u8 ps_state;
+
+	mutex_lock(&psdata->ps_lock);
+	ps_state = psdata->ps_state;
+	mutex_unlock(&psdata->ps_lock);
 
-	if (psdata->ps_state != PS_STATE_AWAKE) {
+	if (ps_state != PS_STATE_AWAKE) {
 		psdata->ps_cmd = PS_CMD_EXIT_PS;
 		schedule_work(&psdata->work);
+		return true;
 	}
+	return false;
 }
 
 static int send_ps_cmd(struct hci_dev *hdev, void *data)
@@ -1171,7 +1183,6 @@  static struct sk_buff *nxp_dequeue(void *data)
 {
 	struct btnxpuart_dev *nxpdev = (struct btnxpuart_dev *)data;
 
-	ps_wakeup(nxpdev);
 	ps_start_timer(nxpdev);
 	return skb_dequeue(&nxpdev->txq);
 }
@@ -1186,6 +1197,11 @@  static void btnxpuart_tx_work(struct work_struct *work)
 	struct sk_buff *skb;
 	int len;
 
+	if (ps_wakeup(nxpdev)) {
+		schedule_work(&nxpdev->tx_work);
+		return;
+	}
+
 	while ((skb = nxp_dequeue(nxpdev))) {
 		len = serdev_device_write_buf(serdev, skb->data, skb->len);
 		hdev->stat.byte_tx += len;