| Message ID | 20231105102018.1546057-1-dmitry.baryshkov@linaro.org |
|---|---|
| State | Accepted |
| Commit | b6a56a5a25d6273729b2b5139d58e3d390318ed2 |
| Headers | show |
| Series | arm64: dts: qcom: qrb2210-rb1: add wifi variant property | expand |
On 11/5/23 11:19, Dmitry Baryshkov wrote: > The RB1 platform doesn't have board-specific board-id programmed, it uses > generic 0xff. Thus add the property with the 'variant' of the > calibration data. > > Note: the driver will check for the calibration data for the following > IDs, so existing board-2.bin files will continue to work. > > - 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1' > - 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120' > - 'bus=snoc,qmi-board-id=ff' > > For the reference, the board is identified by the driver in the > following way: > > ath10k_snoc c800000.wifi: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 > ath10k_snoc c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1 > ath10k_snoc c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 > ath10k_snoc c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 > ath10k_snoc c800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 > ath10k_snoc c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 > > Fixes: 9692ccc49583 ("arm64: dts: qcom: qrb2210-rb1: Enable remote processors") > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > > Initially this patch was sent before Konrad actually sending the WiFi > support patchset for the RB1 board. Afterwards we didn't synchronise and > the calibration variant wasn't squashed into the relevant patchset. > > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 66062006ef4d..a7a744bafc45 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -536,6 +536,7 @@ &wifi { vdd-1.8-xo-supply = <&pm2250_l13>; vdd-1.3-rfa-supply = <&pm2250_l10>; vdd-3.3-ch0-supply = <&pm2250_l22>; + qcom,ath10k-calibration-variant = "Thundercomm_RB1"; status = "okay"; };
The RB1 platform doesn't have board-specific board-id programmed, it uses generic 0xff. Thus add the property with the 'variant' of the calibration data. Note: the driver will check for the calibration data for the following IDs, so existing board-2.bin files will continue to work. - 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1' - 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120' - 'bus=snoc,qmi-board-id=ff' For the reference, the board is identified by the driver in the following way: ath10k_snoc c800000.wifi: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 ath10k_snoc c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1 ath10k_snoc c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 ath10k_snoc c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 ath10k_snoc c800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 ath10k_snoc c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 Fixes: 9692ccc49583 ("arm64: dts: qcom: qrb2210-rb1: Enable remote processors") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- Initially this patch was sent before Konrad actually sending the WiFi support patchset for the RB1 board. Afterwards we didn't synchronise and the calibration variant wasn't squashed into the relevant patchset. --- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 1 + 1 file changed, 1 insertion(+)