| Message ID | 20231105204759.37107-5-bryant@mai.rs |
|---|---|
| State | New |
| Headers | show |
| Series | Add samsung-milletwifi | expand |
On 05/11/2023 21:46, Bryant Mairs wrote: > Some platforms don't use the built-in charging hardware (e.g. milletwifi). > As this is an optional peripheral, default it to off. So your patch order is not correct. If millet-wifi does not use it, why do you enable it in previous patch? Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts index aa0e0e8d2a97..e5293755cf88 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts @@ -253,6 +253,8 @@ &smbb { qcom,fast-charge-high-threshold-voltage = <4400000>; qcom,auto-recharge-threshold-voltage = <4300000>; qcom,minimum-input-voltage = <4400000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts index de19640efe55..538309f153d3 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts @@ -335,6 +335,8 @@ &smbb { qcom,fast-charge-current-limit = <300000>; qcom,fast-charge-safe-current = <600000>; qcom,auto-recharge-threshold-voltage = <4240000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts index b887e5361ec3..b29c39cec2e0 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts @@ -292,6 +292,8 @@ &smbb { qcom,fast-charge-high-threshold-voltage = <4350000>; qcom,auto-recharge-threshold-voltage = <4240000>; qcom,minimum-input-voltage = <4450000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts index 6d1b2439ae3a..88093d6fae2b 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts @@ -403,6 +403,10 @@ &sdhc_2 { pinctrl-1 = <&sdc2_off>; }; +&smbb { + status = "okay"; +}; + &tlmm { sdc1_on: sdc1-on-state { clk-pins { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts index 42d253b75dad..49912e311c31 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts @@ -381,6 +381,8 @@ &smbb { qcom,fast-charge-high-threshold-voltage = <4350000>; qcom,auto-recharge-threshold-voltage = <4240000>; qcom,minimum-input-voltage = <4450000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts index 8230d0e1d95d..a189f5641853 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts @@ -433,6 +433,10 @@ &sdhc_1 { status = "okay"; }; +&smbb { + status = "okay"; +}; + &tlmm { gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio68"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 11468d1409f7..df57041ae167 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -558,6 +558,8 @@ &smbb { qcom,fast-charge-low-threshold-voltage = <3400000>; qcom,auto-recharge-threshold-voltage = <4200000>; qcom,minimum-input-voltage = <4300000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi index 2413778f3715..2fd4f135ed84 100644 --- a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi @@ -82,6 +82,8 @@ smbb: charger@1000 { "usb-valid", "dc-valid"; + status = "disabled"; + chg_otg: otg-vbus { }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi index ed0ba591c755..aca0052a02b7 100644 --- a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi @@ -99,6 +99,8 @@ smbb: charger@1000 { usb-otg-in-supply = <&pm8941_5vs1>; + status = "disabled"; + chg_otg: otg-vbus { }; };
Some platforms don't use the built-in charging hardware (e.g. milletwifi). As this is an optional peripheral, default it to off. Keep it enabled for all other boards that use smbb. Signed-off-by: Bryant Mairs <bryant@mai.rs> --- arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts | 2 ++ arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts | 2 ++ arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts | 2 ++ arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts | 2 ++ arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts | 4 ++++ .../dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 2 ++ arch/arm/boot/dts/qcom/qcom-pm8226.dtsi | 2 ++ arch/arm/boot/dts/qcom/qcom-pm8941.dtsi | 2 ++ 9 files changed, 22 insertions(+)