@@ -64,6 +64,27 @@ properties:
aspm-no-l0s: true
+ brcm,clkreq-mode:
+ description: A string that determines the operating
+ clkreq mode of the PCIe RC HW WRT controlling the refclk signal.
+ There are three different modes --
+ "safe", which drives the
+ refclk signal unconditionally and will work for all devices but does
+ not provide any power savings;
+ "no-l1ss" -- which provides Clock Power Management, L0s, and
+ L1, but cannot provide L1 substate (L1SS) power
+ savings. If the downstream device connected to the RC is
+ L1SS capable AND the OS enables L1SS, all PCIe traffic
+ may abruptly halt, potentially hanging the system;
+ "default" -- which provides L0s, L1, and L1SS, but not
+ compliant to provide Clock Power Management;
+ specifically, may not be able to meet the Tclron max
+ timing of 400ns as specified in "Dynamic Clock Control",
+ section 3.2.5.2.2 of the PCIe spec. This situation is
+ atypical and should happen only with older devices.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ safe, no-l1ss, default ]
+
brcm,scb-sizes:
description: u64 giving the 64bit PCIe memory
viewport size of a memory controller. There may be up to
The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs -- requires the driver to deliberately place the RC HW one of three CLKREQ# modes. The "brcm,clkreq-mode" property allows the user to override the default setting. If this property is omitted, the default mode shall be "default". Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> --- .../bindings/pci/brcm,stb-pcie.yaml | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)