diff mbox series

[RFC,7/8] wifi: ath11k: thermal: don't try to register multiple times

Message ID 20231110102202.3168243-8-kvalo@kernel.org
State Superseded
Headers show
Series wifi: ath11k: hibernation support | expand

Commit Message

Kalle Valo Nov. 10, 2023, 10:22 a.m. UTC
From: Kalle Valo <quic_kvalo@quicinc.com>

Every time the firmware boots we call ath11k_core_qmi_firmware_ready() which
ends up calling ath11k_thermal_register(). So we try to register thermal
devices multiple times. And when we power off the firmware during
suspend/hibernation (implemented in the next patch) we get a warning in resume:

hwmon hwmon4: PM: parent phy0 should not be sleeping

Workaround this similarly like ath11k_mac_register() does by testing
ATH11K_FLAG_REGISTERED.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/thermal.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/thermal.c b/drivers/net/wireless/ath/ath11k/thermal.c
index c9b012f97ba5..80abf472fb87 100644
--- a/drivers/net/wireless/ath/ath11k/thermal.c
+++ b/drivers/net/wireless/ath/ath11k/thermal.c
@@ -162,6 +162,9 @@  int ath11k_thermal_register(struct ath11k_base *ab)
 	struct ath11k_pdev *pdev;
 	int i, ret;
 
+	if (test_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags))
+		return 0;
+
 	for (i = 0; i < ab->num_radios; i++) {
 		pdev = &ab->pdevs[i];
 		ar = pdev->ar;