diff mbox series

[v3,1/3] cpufreq: qcom-nvmem: Enable virtual power domain devices

Message ID 20231114-msm8909-cpufreq-v3-1-926097a6e5c1@kernkonzept.com
State Accepted
Commit 5cbff51e709a72a60b0416b00521b835a1f9a3d5
Headers show
Series cpufreq: qcom-nvmem: Fix power domain scaling | expand

Commit Message

Stephan Gerhold Nov. 14, 2023, 10:07 a.m. UTC
The genpd core caches performance state votes from devices that are
runtime suspended as of commit 3c5a272202c2 ("PM: domains: Improve
runtime PM performance state handling"). They get applied once the
device becomes active again.

To attach the power domains needed by qcom-cpufreq-nvmem the OPP core
calls genpd_dev_pm_attach_by_id(). This results in "virtual" dummy
devices that use runtime PM only to control the enable and performance
state for the attached power domain.

However, at the moment nothing ever resumes the virtual devices created
for qcom-cpufreq-nvmem. They remain permanently runtime suspended. This
means that performance state votes made during cpufreq scaling get
always cached and never applied to the hardware.

Fix this by enabling the devices after attaching them.

Without this fix performance states votes are silently ignored, and the
CPU/CPR voltage is never adjusted. This has been broken since 5.14 but
for some reason no one noticed this on QCS404 so far.

Cc: stable@vger.kernel.org
Fixes: 1cb8339ca225 ("cpufreq: qcom: Add support for qcs404 on nvmem driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 46 +++++++++++++++++++++++++++++++++---
 1 file changed, 43 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 6355a39418c5..d239a45ed497 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -25,6 +25,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_opp.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/soc/qcom/smem.h>
 
@@ -55,6 +56,7 @@  struct qcom_cpufreq_match_data {
 
 struct qcom_cpufreq_drv_cpu {
 	int opp_token;
+	struct device **virt_devs;
 };
 
 struct qcom_cpufreq_drv {
@@ -424,6 +426,18 @@  static const struct qcom_cpufreq_match_data match_data_ipq8074 = {
 	.get_version = qcom_cpufreq_ipq8074_name_version,
 };
 
+static void qcom_cpufreq_put_virt_devs(struct qcom_cpufreq_drv *drv, unsigned int cpu)
+{
+	const char * const *name = drv->data->genpd_names;
+	int i;
+
+	if (!drv->cpus[cpu].virt_devs)
+		return;
+
+	for (i = 0; *name; i++, name++)
+		pm_runtime_put(drv->cpus[cpu].virt_devs[i]);
+}
+
 static int qcom_cpufreq_probe(struct platform_device *pdev)
 {
 	struct qcom_cpufreq_drv *drv;
@@ -478,6 +492,7 @@  static int qcom_cpufreq_probe(struct platform_device *pdev)
 	of_node_put(np);
 
 	for_each_possible_cpu(cpu) {
+		struct device **virt_devs = NULL;
 		struct dev_pm_opp_config config = {
 			.supported_hw = NULL,
 		};
@@ -498,7 +513,7 @@  static int qcom_cpufreq_probe(struct platform_device *pdev)
 
 		if (drv->data->genpd_names) {
 			config.genpd_names = drv->data->genpd_names;
-			config.virt_devs = NULL;
+			config.virt_devs = &virt_devs;
 		}
 
 		if (config.supported_hw || config.genpd_names) {
@@ -509,6 +524,27 @@  static int qcom_cpufreq_probe(struct platform_device *pdev)
 				goto free_opp;
 			}
 		}
+
+		if (virt_devs) {
+			const char * const *name = config.genpd_names;
+			int i, j;
+
+			for (i = 0; *name; i++, name++) {
+				ret = pm_runtime_resume_and_get(virt_devs[i]);
+				if (ret) {
+					dev_err(cpu_dev, "failed to resume %s: %d\n",
+						*name, ret);
+
+					/* Rollback previous PM runtime calls */
+					name = config.genpd_names;
+					for (j = 0; *name && j < i; j++, name++)
+						pm_runtime_put(virt_devs[j]);
+
+					goto free_opp;
+				}
+			}
+			drv->cpus[cpu].virt_devs = virt_devs;
+		}
 	}
 
 	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
@@ -522,8 +558,10 @@  static int qcom_cpufreq_probe(struct platform_device *pdev)
 	dev_err(cpu_dev, "Failed to register platform device\n");
 
 free_opp:
-	for_each_possible_cpu(cpu)
+	for_each_possible_cpu(cpu) {
+		qcom_cpufreq_put_virt_devs(drv, cpu);
 		dev_pm_opp_clear_config(drv->cpus[cpu].opp_token);
+	}
 	return ret;
 }
 
@@ -534,8 +572,10 @@  static void qcom_cpufreq_remove(struct platform_device *pdev)
 
 	platform_device_unregister(cpufreq_dt_pdev);
 
-	for_each_possible_cpu(cpu)
+	for_each_possible_cpu(cpu) {
+		qcom_cpufreq_put_virt_devs(drv, cpu);
 		dev_pm_opp_clear_config(drv->cpus[cpu].opp_token);
+	}
 }
 
 static struct platform_driver qcom_cpufreq_driver = {