diff mbox series

[PULL,8/8] hw/arm/fsl-imx: Do not ignore Error argument

Message ID 20231121102441.3872902-9-peter.maydell@linaro.org
State Accepted
Commit 0cbb56c236a4a28f5149eed227d74bb737321cfc
Headers show
Series [PULL,1/8] target/arm: enable FEAT_RNG on Neoverse-N2 | expand

Commit Message

Peter Maydell Nov. 21, 2023, 10:24 a.m. UTC 
From: Philippe Mathieu-Daudé <philmd@linaro.org>

Both i.MX25 and i.MX6 SoC models ignore the Error argument when
setting the PHY number. Pick &error_abort which is the error
used by the i.MX7 SoC (see commit 1f7197deb0 "ability to change
the FEC PHY on i.MX7 processor").

Fixes: 74c1330582 ("ability to change the FEC PHY on i.MX25 processor")
Fixes: a9c167a3c4 ("ability to change the FEC PHY on i.MX6 processor")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231120115116.76858-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/fsl-imx25.c | 3 ++-
 hw/arm/fsl-imx6.c  | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c
index 24c43745903..9aabbf7f587 100644
--- a/hw/arm/fsl-imx25.c
+++ b/hw/arm/fsl-imx25.c
@@ -169,7 +169,8 @@  static void fsl_imx25_realize(DeviceState *dev, Error **errp)
                                             epit_table[i].irq));
     }
 
-    object_property_set_uint(OBJECT(&s->fec), "phy-num", s->phy_num, &err);
+    object_property_set_uint(OBJECT(&s->fec), "phy-num", s->phy_num,
+                             &error_abort);
     qdev_set_nic_properties(DEVICE(&s->fec), &nd_table[0]);
 
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->fec), errp)) {
diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c
index 4fa7f0b95ed..7dc42cbfe64 100644
--- a/hw/arm/fsl-imx6.c
+++ b/hw/arm/fsl-imx6.c
@@ -379,7 +379,8 @@  static void fsl_imx6_realize(DeviceState *dev, Error **errp)
                                             spi_table[i].irq));
     }
 
-    object_property_set_uint(OBJECT(&s->eth), "phy-num", s->phy_num, &err);
+    object_property_set_uint(OBJECT(&s->eth), "phy-num", s->phy_num,
+                             &error_abort);
     qdev_set_nic_properties(DEVICE(&s->eth), &nd_table[0]);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->eth), errp)) {
         return;