diff mbox series

[4/4] ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617

Message ID 20231125094248.43537-4-tony@atomide.com
State New
Headers show
Series [1/4] dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets | expand

Commit Message

Tony Lindgren Nov. 25, 2023, 9:42 a.m. UTC 
The Motorola mapphone tablets are similar to the mapphone phones, but with
different display and without some phone related peripherals.

Let's add a new motorola-mapphone-mz607-mz617.dtsi and basic files for
xyboard mz609 and mz617. All the tablets from mz607 to mz617 are quite
similar so let's use motorola-mapphone-mz607-mz617.dtsi naming for the
common file.

Note that the tc358765 lcd bridge needs driver changes before it can be
added.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/ti/omap/Makefile            |  4 +-
 .../omap/motorola-mapphone-mz607-mz617.dtsi   | 21 +++++++++
 .../boot/dts/ti/omap/omap4-xyboard-mz609.dts  | 46 +++++++++++++++++++
 .../boot/dts/ti/omap/omap4-xyboard-mz617.dts  | 17 +++++++
 4 files changed, 87 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -79,7 +79,9 @@  dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-sdp.dtb \
 	omap4-sdp-es23plus.dtb \
 	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
+	omap4-var-stk-om44.dtb \
+	omap4-xyboard-mz609.dtb \
+	omap4-xyboard-mz617.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-baltos-ir2110.dtb \
 	am335x-baltos-ir3220.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
new file mode 100644
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
@@ -0,0 +1,21 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+		       <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+	vmmc-supply = <&vsimcard>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio_176 */
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
new file mode 100644
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
@@ -0,0 +1,46 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ609";
+	compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&i2c1 {
+	led-controller@38 {
+		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x38>;
+
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
+
+		backlight_led: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = ":backlight";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
new file mode 100644
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
@@ -0,0 +1,17 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ617";
+	compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+};