diff mbox series

[09/12] arm64: dts: qcom: qcm2290: Hook up interconnects

Message ID 20231125-topic-rb1_feat-v1-9-11d71b12b058@linaro.org
State Superseded
Headers show
Series RB1/QCM2290 features | expand

Commit Message

Konrad Dybcio Nov. 25, 2023, 2:17 p.m. UTC
Add interconnect provider nodes and hook up interconnects to consumer
devices, including bwmon.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 248 ++++++++++++++++++++++++++++++++++
 1 file changed, 248 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index a3edc4667cc5..ce04d0acdede 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -12,6 +12,8 @@ 
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,qcm2290.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -151,6 +153,8 @@  scm: scm {
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -669,6 +673,33 @@  usb_qmpphy: phy@1615000 {
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,qcm2290-snoc";
+			reg = <0x0 0x01880000 0x0 0x60200>;
+			#interconnect-cells = <2>;
+
+			qup_virt: interconnect-qup {
+				compatible = "qcom,qcm2290-qup-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,qcm2290-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,qcm2290-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,qcm2290-cnoc";
+			reg = <0x0 0x01900000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -681,6 +712,60 @@  qusb2_hstx_trim: hstx-trim@25b {
 			};
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -721,6 +806,12 @@  rng: rng@4453000 {
 			clock-names = "core";
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,qcm2290-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
@@ -756,13 +847,45 @@  sdhc_1: mmc@4744000 {
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 			iommus = <&apps_smmu 0xc0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -786,6 +909,12 @@  sdhc_2: mmc@4784000 {
 			power-domains = <&rpmpd QCM2290_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0xa0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -799,11 +928,15 @@  sdhc2_opp_table: opp-table {
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -851,6 +984,15 @@  i2c0: i2c@4a80000 {
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -867,6 +1009,12 @@  spi0: spi@4a80000 {
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -880,6 +1028,12 @@  uart0: serial@4a80000 {
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -894,6 +1048,15 @@  i2c1: i2c@4a84000 {
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -910,6 +1073,12 @@  spi1: spi@4a84000 {
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -926,6 +1095,15 @@  i2c2: i2c@4a88000 {
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -942,6 +1120,12 @@  spi2: spi@4a88000 {
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -958,6 +1142,15 @@  i2c3: i2c@4a8c000 {
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -974,6 +1167,12 @@  spi3: spi@4a8c000 {
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -990,6 +1189,15 @@  i2c4: i2c@4a90000 {
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1006,6 +1214,12 @@  spi4: spi@4a90000 {
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1019,6 +1233,12 @@  uart4: serial@4a90000 {
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart4_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1033,6 +1253,15 @@  i2c5: i2c@4a94000 {
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1049,6 +1278,12 @@  spi5: spi@4a94000 {
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1081,6 +1316,13 @@  usb: usb@4ef8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			/* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
 			wakeup-source;
 
 			#address-cells = <2>;
@@ -1127,6 +1369,12 @@  mdss: display-subsystem@5e00000 {
 
 			iommus = <&apps_smmu 0x420 0x2>,
 				 <&apps_smmu 0x421 0x0>;
+			interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			#address-cells = <2>;
 			#size-cells = <2>;