@@ -210,6 +210,7 @@ config MACH_SMDKV310
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_BACKLIGHT
+ select EXYNOS_DEV_DRM
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_DMA
@@ -44,6 +44,7 @@
#include <mach/map.h>
#include <mach/ohci.h>
+#include <drm/exynos_drm.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -156,6 +157,26 @@ static struct platform_device smdkv310_lcd_lte480wv = {
.dev.platform_data = &smdkv310_lcd_lte480wv_data,
};
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+ .panel = {
+ .timing = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ },
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .default_win = 0,
+ .bpp = 32,
+};
+#else
static struct s3c_fb_pd_win smdkv310_fb_win0 = {
.win_mode = {
.left_margin = 13,
@@ -177,6 +198,7 @@ static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
+#endif
static struct resource smdkv310_smsc911x_resources[] = {
[0] = {
@@ -269,6 +291,9 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&s5p_device_fimc_md,
&s5p_device_g2d,
&s5p_device_jpeg,
+#ifdef CONFIG_DRM_EXYNOS
+ &exynos_device_drm,
+#endif
&exynos4_device_ac97,
&exynos4_device_i2s0,
&exynos4_device_ohci,
@@ -360,7 +385,12 @@ static void __init smdkv310_machine_init(void)
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+#ifdef CONFIG_DRM_EXYNOS
+ s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+ exynos4_fimd0_gpio_setup_24bpp();
+#else
s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
+#endif
smdkv310_ehci_init();
smdkv310_ohci_init();
DRM core device and FIMD DRM platform device support is added to SMDKV310 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> --- arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-exynos/mach-smdkv310.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 0 deletions(-)