diff mbox series

[v2,1/4] dt-bindings: reset: Add syscon to nuvoton ma35d1 system-management node

Message ID 20231128061118.575847-2-ychuang570808@gmail.com
State Superseded
Headers show
Series Add support for nuvoton ma35d1 pin control | expand

Commit Message

Jacky Huang Nov. 28, 2023, 6:11 a.m. UTC 
From: Jacky Huang <ychuang3@nuvoton.com>

Add a compatible 'syscon' to the system management node since the system
control registers are mapped by this driver. The other driver must access
the system control registers through 'regmap' using a phandle that
references this node.

Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
---
 .../devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml        | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Philipp Zabel Nov. 29, 2023, 10:28 a.m. UTC | #1 
On Di, 2023-11-28 at 06:11 +0000, Jacky Huang wrote:
> From: Jacky Huang <ychuang3@nuvoton.com>
> 
> Add a compatible 'syscon' to the system management node since the system
> control registers are mapped by this driver. The other driver must access
> the system control registers through 'regmap' using a phandle that
> references this node.
> 
> Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

to be applied together with the dts changes.

regards
Philipp
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
index 34c5c1c08ec1..3ce7dcecd87a 100644
--- a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
@@ -18,6 +18,7 @@  properties:
   compatible:
     items:
       - const: nuvoton,ma35d1-reset
+      - const: syscon
 
   reg:
     maxItems: 1
@@ -37,7 +38,7 @@  examples:
   - |
 
     system-management@40460000 {
-        compatible = "nuvoton,ma35d1-reset";
+        compatible = "nuvoton,ma35d1-reset", "syscon";
         reg = <0x40460000 0x200>;
         #reset-cells = <1>;
     };