diff mbox series

[2/2] ARM: dts: qcom: msm8226: Add CPU and SAW/ACC nodes

Message ID 20231203-msm8226-cpu-v1-2-d18e83340b32@z3ntu.xyz
State Superseded
Headers show
Series [1/2] ARM: dts: qcom: msm8226: Sort and clean up nodes | expand

Commit Message

Luca Weiss Dec. 3, 2023, 10:38 p.m. UTC
From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>

Add CPU and SAW/ACC nodes to enable SMP on MSM8226.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
[luca: update some nodes to fix dtbs_check errors, reorder, cleanup]
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 91 ++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

Comments

Luca Weiss Dec. 4, 2023, 6:38 p.m. UTC | #1
On Montag, 4. Dezember 2023 11:41:36 CET Konrad Dybcio wrote:
> On 3.12.2023 23:38, Luca Weiss wrote:
> > From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> > 
> > Add CPU and SAW/ACC nodes to enable SMP on MSM8226.
> > 
> > Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> > [luca: update some nodes to fix dtbs_check errors, reorder, cleanup]
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> 
> Looks like L2 SAW (@ 0xf9012000) is missing.. but then it's present
> on 8974.. but it's not bound by any driver :)

Right, I had this node before:

	saw_l2: power-controller@f9012000 {
		compatible = "qcom,saw2";
		reg = <0xf9012000 0x1000>;
		regulator;
	};

And then used like this:

	L2: l2-cache {
		compatible = "cache";
		cache-level = <2>;
		qcom,saw = <&saw_l2>;
	};

I decided to remove it because first there's no "qcom,saw2" (without a second 
compatible) in the yaml. And qcom,saw property in the l2-cache node also 
wasn't accepted. Since I'm not aware of any driver code currently using this 
(and the bindings not being particularly maintained, there's still this bit in 
.txt form?) I decided to remove it to not knowingly introduce binding errors.

Regards
Luca

> 
> The nodes you added here look correct FWIW
> 
> Konrad
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 8757bc0c8a0f..28abaed4dd08 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -34,6 +34,57 @@  sleep_clk: sleep_clk {
 		};
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		CPU1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		CPU2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+		};
+
+		CPU3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-msm8226", "qcom,scm";
@@ -243,6 +294,46 @@  frame@f9028000 {
 			};
 		};
 
+		acc0: power-manager@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw0: power-manager@f9089000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>;
+		};
+
+		acc1: power-manager@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw1: power-manager@f9099000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>;
+		};
+
+		acc2: power-manager@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw2: power-manager@f90a9000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>;
+		};
+
+		acc3: power-manager@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw3: power-manager@f90b9000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>;
+		};
+
 		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;