@@ -189,10 +189,10 @@ struct uart_qe_port {
u16 tx_fifosize;
int wait_closing;
u32 flags;
- struct qe_bd *rx_bd_base;
- struct qe_bd *rx_cur;
- struct qe_bd *tx_bd_base;
- struct qe_bd *tx_cur;
+ struct qe_bd __iomem *rx_bd_base;
+ struct qe_bd __iomem *rx_cur;
+ struct qe_bd __iomem *tx_bd_base;
+ struct qe_bd __iomem *tx_cur;
unsigned char *tx_buf;
unsigned char *rx_buf;
void *bd_virt; /* virtual address of the BD buffers */
@@ -258,7 +258,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
{
struct uart_qe_port *qe_port =
container_of(port, struct uart_qe_port, port);
- struct qe_bd *bdp = qe_port->tx_bd_base;
+ struct qe_bd __iomem *bdp = qe_port->tx_bd_base;
while (1) {
if (ioread16be(&bdp->status) & BD_SC_READY)
@@ -330,7 +330,7 @@ static void qe_uart_stop_tx(struct uart_port *port)
*/
static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
{
- struct qe_bd *bdp;
+ struct qe_bd __iomem *bdp;
unsigned char *p;
unsigned int count;
struct uart_port *port = &qe_port->port;
@@ -341,7 +341,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
/* Pick next descriptor and fill from buffer */
bdp = qe_port->tx_cur;
- p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
+ p = qe2cpu_addr(ioread32be(&bdp->buf), qe_port);
*p++ = port->x_char;
iowrite16be(1, &bdp->length);
@@ -368,7 +368,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
while (!(ioread16be(&bdp->status) & BD_SC_READY) && !uart_circ_empty(xmit)) {
count = 0;
- p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
+ p = qe2cpu_addr(ioread32be(&bdp->buf), qe_port);
while (count < qe_port->tx_fifosize) {
*p++ = xmit->buf[xmit->tail];
uart_xmit_advance(port, 1);
@@ -460,7 +460,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
unsigned char ch, *cp;
struct uart_port *port = &qe_port->port;
struct tty_port *tport = &port->state->port;
- struct qe_bd *bdp;
+ struct qe_bd __iomem *bdp;
u16 status;
unsigned int flg;
@@ -487,7 +487,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
}
/* get pointer */
- cp = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
+ cp = qe2cpu_addr(ioread32be(&bdp->buf), qe_port);
/* loop through the buffer */
while (i-- > 0) {
@@ -590,7 +590,7 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
{
int i;
void *bd_virt;
- struct qe_bd *bdp;
+ struct qe_bd __iomem *bdp;
/* Set the physical address of the host memory buffers in the buffer
* descriptors, and the virtual address for us to work with.
@@ -648,7 +648,7 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
{
u32 cecr_subblock;
struct ucc_slow __iomem *uccp = qe_port->uccp;
- struct ucc_uart_pram *uccup = qe_port->uccup;
+ struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
unsigned int i;
@@ -983,7 +983,7 @@ static int qe_uart_request_port(struct uart_port *port)
qe_port->us_private = uccs;
qe_port->uccp = uccs->us_regs;
- qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram;
+ qe_port->uccup = (struct ucc_uart_pram __iomem *)uccs->us_pram;
qe_port->rx_bd_base = uccs->rx_bd;
qe_port->tx_bd_base = uccs->tx_bd;
@@ -1156,7 +1156,7 @@ static void uart_firmware_cont(const struct firmware *fw, void *context)
firmware = (struct qe_firmware *) fw->data;
- if (firmware->header.length != fw->size) {
+ if (be32_to_cpu(firmware->header.length) != fw->size) {
dev_err(dev, "invalid firmware\n");
goto out;
}
sparse reports multiple problems with address space type. Most problems are linked to missing __iomem qualifier. Others are caused by dereferencing __iomem addresses. Fix all this by adding missing __iomem and using ioread32be(). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312050412.zN2PKArS-lkp@intel.com/ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- drivers/tty/serial/ucc_uart.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)