diff mbox series

[v9,12/12] wifi: ath11k: use WMI_VDEV_SET_TPC_POWER_CMDID when EXT_TPC_REG_SUPPORT for 6 GHz

Message ID 20231211062216.382164-13-quic_bqiang@quicinc.com
State Superseded
Headers show
Series wifi: ath11k: add support for 6 GHz station for various modes : LPI, SP and VLP | expand

Commit Message

Baochen Qiang Dec. 11, 2023, 6:22 a.m. UTC 
From: Wen Gong <quic_wgong@quicinc.com>

When station is connected to a 6 GHz AP, it has 2 ways to configure
the power limit to firmware. The first way is to send 2 WMI commands
WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to
firmware, the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to
firmware which include more parameters for power control.

When firmware supports SERVICE_EXT_TPC_REG, it means firmware supports
WMI_VDEV_SET_TPC_POWER_CMDID, then ath11k selects the second way.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
---
v9:
 1. do not discard txpower setting for BSS_CHANGED_TXPOWER.
 2. rename subject and update commit log.
v8:
 no change.
v7:
 1. squash original patch 11 and patch 13.
 2. s/wmi command/WMI commands/
 3. s/way/ways/
 4. add TODO tag for CSA.

 drivers/net/wireless/ath/ath11k/mac.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 2520f78c9c0b..2ed64119ce1c 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3397,6 +3397,18 @@  static int ath11k_mac_config_obss_pd(struct ath11k *ar,
 	return 0;
 }
 
+static bool ath11k_mac_supports_station_tpc(struct ath11k *ar,
+					    struct ath11k_vif *arvif,
+					    const struct cfg80211_chan_def *chandef)
+{
+	return ath11k_wmi_supports_6ghz_cc_ext(ar) &&
+		test_bit(WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT, ar->ab->wmi_ab.svc_map) &&
+		arvif->vdev_type == WMI_VDEV_TYPE_STA &&
+		arvif->vdev_subtype == WMI_VDEV_SUBTYPE_NONE &&
+		chandef->chan &&
+		chandef->chan->band == NL80211_BAND_6GHZ;
+}
+
 static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 					   struct ieee80211_vif *vif,
 					   struct ieee80211_bss_conf *info,
@@ -3596,7 +3608,6 @@  static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_TXPOWER) {
 		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "vdev_id %i txpower %d\n",
 			   arvif->vdev_id, info->txpower);
-
 		arvif->txpower = info->txpower;
 		ath11k_mac_txpower_recalc(ar);
 	}
@@ -7279,6 +7290,15 @@  ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
 		return ret;
 	}
 
+	/* TODO: For now we only set TPC power here. However when
+	 * channel changes, say CSA, it should be updated again.
+	 */
+	if (ath11k_mac_supports_station_tpc(ar, arvif, chandef)) {
+		ath11k_mac_fill_reg_tpc_info(ar, arvif->vif, &arvif->chanctx);
+		ath11k_wmi_send_vdev_set_tpc_power(ar, arvif->vdev_id,
+						   &arvif->reg_tpc_info);
+	}
+
 	if (!restart)
 		ar->num_started_vdevs++;
 
@@ -8093,7 +8113,7 @@  ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 			goto out;
 		}
 		ath11k_reg_handle_chan_list(ab, reg_info, power_type);
-
+		arvif->chanctx = *ctx;
 		ath11k_mac_parse_tx_pwr_env(ar, vif, ctx);
 	}