@@ -258,6 +258,7 @@ static struct watchdog_device wdt_dev = {
static int __init it87_wdt_init(void)
{
u8 chip_rev;
+ u8 ctrl;
int rc;
rc = superio_enter();
@@ -316,7 +317,18 @@ static int __init it87_wdt_init(void)
superio_select(GPIO);
superio_outb(WDT_TOV1, WDTCFG);
- superio_outb(0x00, WDTCTRL);
+
+ switch (chip_type) {
+ case IT8784_ID:
+ case IT8786_ID:
+ ctrl = superio_inb(WDTCTRL);
+ ctrl &= 0x08;
+ superio_outb(ctrl, WDTCTRL);
+ break;
+ default:
+ superio_outb(0x00, WDTCTRL);
+ }
+
superio_exit();
if (timeout < 1 || timeout > max_units * 60) {
WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786. Some motherboards require this bit to be set to 1 (= PCICLK mode), otherwise the watchdog functionality gets broken. The BIOS of those motherboards sets WDTCTRL bit 3 already to 1. Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps the status as set by the BIOS of the motherboard. Watchdog tests have been successful with this patch with the following systems: IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2) IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2) IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L) Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@roeck-us.net/ Signed-off-by: Werner Fischer <devlists@wefi.net> --- drivers/watchdog/it87_wdt.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)