@@ -96,6 +96,7 @@ struct ci_hdrc_imx_data {
struct usb_phy *phy;
struct platform_device *ci_pdev;
struct clk *clk;
+ struct clk *clk_wakeup;
struct imx_usbmisc_data *usbmisc_data;
bool supports_runtime_pm;
bool override_phy_control;
@@ -199,7 +200,7 @@ static int imx_get_clks(struct device *dev)
data->clk_ipg = devm_clk_get(dev, "ipg");
if (IS_ERR(data->clk_ipg)) {
- /* If the platform only needs one clocks */
+ /* If the platform only needs one primary clock */
data->clk = devm_clk_get(dev, NULL);
if (IS_ERR(data->clk)) {
ret = PTR_ERR(data->clk);
@@ -208,6 +209,18 @@ static int imx_get_clks(struct device *dev)
PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
return ret;
}
+ /* Get wakeup clock. Not all of the platforms need to
+ * handle this clock. So make it optional.
+ */
+ data->clk_wakeup = devm_clk_get_optional(dev,
+ "usb_wakeup_clk");
+ if (IS_ERR(data->clk_wakeup)) {
+ ret = PTR_ERR(data->clk_wakeup);
+ dev_err(dev,
+ "Failed to get wakeup clk, err=%ld\n",
+ PTR_ERR(data->clk_wakeup));
+ return ret;
+ }
return ret;
}
@@ -423,6 +436,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
if (ret)
goto disable_hsic_regulator;
+ ret = clk_prepare_enable(data->clk_wakeup);
+ if (ret)
+ goto err_wakeup_clk;
+
data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
if (IS_ERR(data->phy)) {
ret = PTR_ERR(data->phy);
@@ -504,6 +521,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
err_clk:
+ clk_disable_unprepare(data->clk_wakeup);
+err_wakeup_clk:
imx_disable_unprepare_clks(dev);
disable_hsic_regulator:
if (data->hsic_pad_regulator)
@@ -530,6 +549,7 @@ static void ci_hdrc_imx_remove(struct platform_device *pdev)
usb_phy_shutdown(data->phy);
if (data->ci_pdev) {
imx_disable_unprepare_clks(&pdev->dev);
+ clk_disable_unprepare(data->clk_wakeup);
if (data->plat_data->flags & CI_HDRC_PMQOS)
cpu_latency_qos_remove_request(&data->pm_qos_req);
if (data->hsic_pad_regulator)
Some platform using ChipIdea IP may keep 32KHz wakeup clock always on without usb driver intervention. And some may need driver to handle this clock. This patch will get wakeup clock and keep it always on to make controller work correctlly. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- drivers/usb/chipidea/ci_hdrc_imx.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)