| Message ID | 20231216165259.5389-1-zenmchen@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] wifi: rtl8xxxu: Add additional USB IDs for RTL8192EU devices | expand |
On 12/16/23 10:52, Zenm Chen wrote: > Add additional USB IDs found in the vendor driver from > https://github.com/Mange/rtl8192eu-linux-driver to support more > RTL8192EU devices. > > Signed-off-by: Zenm Chen <zenmchen@gmail.com> > --- > v2: > - Not to put these USB IDs in CONFIG_RTL8XXXU_UNTESTED Have you tested all modes including STA, AP, P2P, etc? If not, then your devices belong in the CONFIG_RTL8XXXU_UNTESTED section. I am also not fond of splitting the rtl8192eu devices into several different spots in the table. That only makes it harder to see what devices are supported. NACKed by Larry Finger <Larry.Finger@lwfinger.net> Larry
>> On 12/16/23 10:52, Zenm Chen wrote: >> Add additional USB IDs found in the vendor driver from >> https://github.com/Mange/rtl8192eu-linux-driver to support more >> RTL8192EU devices. >> >> Signed-off-by: Zenm Chen <zenmchen@gmail.com> >> --- >> v2: >> - Not to put these USB IDs in CONFIG_RTL8XXXU_UNTESTED > > Have you tested all modes including STA, AP, P2P, etc? If not, then your devices > belong in the CONFIG_RTL8XXXU_UNTESTED section. You're right, I haven't tested these four devices, so they should be in the CONFIG_RTL8XXXU_UNTESTED section. Please drop this patch, thanks. > > I am also not fond of splitting the rtl8192eu devices into several different > spots in the table. That only makes it harder to see what devices are supported. > > NACKed by Larry Finger <Larry.Finger@lwfinger.net> > > Larry
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 43ee7592bc6e..3f30795f9375 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -7732,12 +7732,24 @@ static const struct usb_device_id dev_table[] = { /* TP-Link TL-WN822N v4 */ {USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0108, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8192eu_fops}, +/* D-Link DWA-131 rev C1 */ +{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3312, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, /* D-Link DWA-131 rev E1, tested by David Patiño */ {USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3319, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8192eu_fops}, /* Tested by Myckel Habets */ {USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0109, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8192eu_fops}, +/* TP-Link TL-WN8200ND V2 */ +{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0126, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, +/* Mercusys MW300UM */ +{USB_DEVICE_AND_INTERFACE_INFO(0x2c4e, 0x0100, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, +/* Mercusys MW300UH */ +{USB_DEVICE_AND_INTERFACE_INFO(0x2c4e, 0x0104, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8723bu_fops}, {USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0xa611, 0xff, 0xff, 0xff),
Add additional USB IDs found in the vendor driver from https://github.com/Mange/rtl8192eu-linux-driver to support more RTL8192EU devices. Signed-off-by: Zenm Chen <zenmchen@gmail.com> --- v2: - Not to put these USB IDs in CONFIG_RTL8XXXU_UNTESTED --- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)