diff mbox series

[29/35] target/arm: Mark up VNCR offsets (offsets 0x100..0x160)

Message ID 20231218113305.2511480-30-peter.maydell@linaro.org
State Superseded
Headers show
Series target/arm: Implement emulation of nested virtualization | expand

Commit Message

Peter Maydell Dec. 18, 2023, 11:32 a.m. UTC
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM.  This commit covers offsets 0x100 to 0x160.

Many (but not all) of the registers in this range have _EL12 aliases,
and the slot in memory is shared between the _EL12 version of the
register and the _EL1 version.  Where we programmatically generate
the regdef for the _EL12 register, arrange that its
nv2_redirect_offset is set up correctly to do this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/debug_helper.c |  1 +
 target/arm/helper.c       | 22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+)

Comments

Richard Henderson Dec. 28, 2023, 12:42 a.m. UTC | #1
On 12/18/23 22:32, Peter Maydell wrote:
> Mark up the cpreginfo structs to indicate offsets for system
> registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
> the Arm ARM.  This commit covers offsets 0x100 to 0x160.
> 
> Many (but not all) of the registers in this range have _EL12 aliases,
> and the slot in memory is shared between the _EL12 version of the
> register and the _EL1 version.  Where we programmatically generate
> the regdef for the _EL12 register, arrange that its
> nv2_redirect_offset is set up correctly to do this.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
>   target/arm/debug_helper.c |  1 +
>   target/arm/helper.c       | 22 ++++++++++++++++++++++
>   2 files changed, 23 insertions(+)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

> +        /*
> +         * If the _EL1 register is redirected to memory by FEAT_NV2,
> +         * then it shares the offset with the _EL12 register,
> +         * and which one is redirected depends on HCR_EL2.NV1.
> +         */
> +        if (new_reg->nv2_redirect_offset) {
> +            assert(new_reg->nv2_redirect_offset & NV2_REDIR_NV1);
> +            new_reg->nv2_redirect_offset &= ~NV2_REDIR_NV1;
> +            new_reg->nv2_redirect_offset |= NV2_REDIR_NO_NV1;
> +        }

Could use xor to flip both bits at once.


r~
Peter Maydell Jan. 4, 2024, 4:24 p.m. UTC | #2
On Thu, 28 Dec 2023 at 00:42, Richard Henderson
<richard.henderson@linaro.org> wrote:
>
> On 12/18/23 22:32, Peter Maydell wrote:
> > Mark up the cpreginfo structs to indicate offsets for system
> > registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
> > the Arm ARM.  This commit covers offsets 0x100 to 0x160.
> >
> > Many (but not all) of the registers in this range have _EL12 aliases,
> > and the slot in memory is shared between the _EL12 version of the
> > register and the _EL1 version.  Where we programmatically generate
> > the regdef for the _EL12 register, arrange that its
> > nv2_redirect_offset is set up correctly to do this.
> >
> > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> > ---
> >   target/arm/debug_helper.c |  1 +
> >   target/arm/helper.c       | 22 ++++++++++++++++++++++
> >   2 files changed, 23 insertions(+)
>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
>
> > +        /*
> > +         * If the _EL1 register is redirected to memory by FEAT_NV2,
> > +         * then it shares the offset with the _EL12 register,
> > +         * and which one is redirected depends on HCR_EL2.NV1.
> > +         */
> > +        if (new_reg->nv2_redirect_offset) {
> > +            assert(new_reg->nv2_redirect_offset & NV2_REDIR_NV1);
> > +            new_reg->nv2_redirect_offset &= ~NV2_REDIR_NV1;
> > +            new_reg->nv2_redirect_offset |= NV2_REDIR_NO_NV1;
> > +        }
>
> Could use xor to flip both bits at once.

Could do, but explicit clear-then-set seems a bit more
readable to me, and since this is only happening once at
startup there's no efficiency concern here.

thanks
-- PMM
diff mbox series

Patch

diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c
index b39144d5b93..7d856acddf2 100644
--- a/target/arm/debug_helper.c
+++ b/target/arm/debug_helper.c
@@ -960,6 +960,7 @@  static const ARMCPRegInfo debug_cp_reginfo[] = {
       .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2,
       .access = PL1_RW, .accessfn = access_tda,
       .fgt = FGT_MDSCR_EL1,
+      .nv2_redirect_offset = 0x158,
       .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1),
       .resetvalue = 0 },
     /*
diff --git a/target/arm/helper.c b/target/arm/helper.c
index ff7f90fa4af..78c3c3ebd8d 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -647,6 +647,7 @@  static const ARMCPRegInfo cp_reginfo[] = {
       .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_CONTEXTIDR_EL1,
+      .nv2_redirect_offset = 0x108 | NV2_REDIR_NV1,
       .secure = ARM_CP_SECSTATE_NS,
       .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]),
       .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, },
@@ -883,6 +884,7 @@  static const ARMCPRegInfo v6_cp_reginfo[] = {
     { .name = "CPACR", .state = ARM_CP_STATE_BOTH, .opc0 = 3,
       .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access,
       .fgt = FGT_CPACR_EL1,
+      .nv2_redirect_offset = 0x100 | NV2_REDIR_NV1,
       .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1),
       .resetfn = cpacr_reset, .writefn = cpacr_write, .readfn = cpacr_read },
 };
@@ -2234,11 +2236,13 @@  static const ARMCPRegInfo v7_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_AFSR0_EL1,
+      .nv2_redirect_offset = 0x128 | NV2_REDIR_NV1,
       .type = ARM_CP_CONST, .resetvalue = 0 },
     { .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_AFSR1_EL1,
+      .nv2_redirect_offset = 0x130 | NV2_REDIR_NV1,
       .type = ARM_CP_CONST, .resetvalue = 0 },
     /*
      * MAIR can just read-as-written because we don't implement caches
@@ -2248,6 +2252,7 @@  static const ARMCPRegInfo v7_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_MAIR_EL1,
+      .nv2_redirect_offset = 0x140 | NV2_REDIR_NV1,
       .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]),
       .resetvalue = 0 },
     { .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64,
@@ -4271,6 +4276,7 @@  static const ARMCPRegInfo vmsa_cp_reginfo[] = {
       .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_ESR_EL1,
+      .nv2_redirect_offset = 0x138 | NV2_REDIR_NV1,
       .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
     { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0,
@@ -4290,6 +4296,7 @@  static const ARMCPRegInfo vmsa_cp_reginfo[] = {
       .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_TCR_EL1,
+      .nv2_redirect_offset = 0x120 | NV2_REDIR_NV1,
       .writefn = vmsa_tcr_el12_write,
       .raw_writefn = raw_write,
       .resetvalue = 0,
@@ -4529,6 +4536,7 @@  static const ARMCPRegInfo lpae_cp_reginfo[] = {
       .opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_AMAIR_EL1,
+      .nv2_redirect_offset = 0x148 | NV2_REDIR_NV1,
       .type = ARM_CP_CONST, .resetvalue = 0 },
     /* AMAIR1 is mapped to AMAIR_EL1[63:32] */
     { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1,
@@ -5718,6 +5726,7 @@  static const ARMCPRegInfo v8_cp_reginfo[] = {
       .type = ARM_CP_ALIAS,
       .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 0,
       .access = PL1_RW, .accessfn = access_nv1,
+      .nv2_redirect_offset = 0x160 | NV2_REDIR_NV1,
       .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_SVC]) },
     /*
      * We rely on the access checks not allowing the guest to write to the
@@ -6710,6 +6719,17 @@  static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu)
         new_reg->writefn = el2_e2h_e12_write;
         new_reg->accessfn = el2_e2h_e12_access;
 
+        /*
+         * If the _EL1 register is redirected to memory by FEAT_NV2,
+         * then it shares the offset with the _EL12 register,
+         * and which one is redirected depends on HCR_EL2.NV1.
+         */
+        if (new_reg->nv2_redirect_offset) {
+            assert(new_reg->nv2_redirect_offset & NV2_REDIR_NV1);
+            new_reg->nv2_redirect_offset &= ~NV2_REDIR_NV1;
+            new_reg->nv2_redirect_offset |= NV2_REDIR_NO_NV1;
+        }
+
         ok = g_hash_table_insert(cpu->cp_regs,
                                  (gpointer)(uintptr_t)a->new_key, new_reg);
         g_assert(ok);
@@ -9414,6 +9434,7 @@  void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "ACTLR_EL1", .state = ARM_CP_STATE_BOTH,
               .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 1,
               .access = PL1_RW, .accessfn = access_tacr,
+              .nv2_redirect_offset = 0x118,
               .type = ARM_CP_CONST, .resetvalue = cpu->reset_auxcr },
             { .name = "ACTLR_EL2", .state = ARM_CP_STATE_BOTH,
               .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 1,
@@ -9499,6 +9520,7 @@  void register_cp_regs_for_features(ARMCPU *cpu)
             .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0,
             .access = PL1_RW, .accessfn = access_tvm_trvm,
             .fgt = FGT_SCTLR_EL1,
+            .nv2_redirect_offset = 0x110 | NV2_REDIR_NV1,
             .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s),
                                    offsetof(CPUARMState, cp15.sctlr_ns) },
             .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr,