diff mbox series

OPP: Pass rounded rate to _set_opp()

Message ID 7269c250db1b89cda72ca419b7bd5e37997309d6.1704450876.git.viresh.kumar@linaro.org
State Accepted
Commit 7269c250db1b89cda72ca419b7bd5e37997309d6
Headers show
Series OPP: Pass rounded rate to _set_opp() | expand

Commit Message

Viresh Kumar Jan. 5, 2024, 10:34 a.m. UTC 
The OPP core finds the eventual frequency to set with the help of
clk_round_rate() and the same was earlier getting passed to _set_opp()
and that's what would get configured.

The commit 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of
frequency") mistakenly changed that. Fix it.

Fixes: 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of frequency")
Cc: v5.18+ <stable@vger.kernel.org> # v6.0+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/opp/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 29f8160c3e38..5e6cfcbd2e87 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -1352,12 +1352,12 @@  int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		 * value of the frequency. In such a case, do not abort but
 		 * configure the hardware to the desired frequency forcefully.
 		 */
-		forced = opp_table->rate_clk_single != target_freq;
+		forced = opp_table->rate_clk_single != freq;
 	}
 
-	ret = _set_opp(dev, opp_table, opp, &target_freq, forced);
+	ret = _set_opp(dev, opp_table, opp, &freq, forced);
 
-	if (target_freq)
+	if (freq)
 		dev_pm_opp_put(opp);
 
 put_opp_table: