diff mbox series

[bpf-next,v2,12/15] bpf: Preserve boundaries and track scalars on narrowing fill

Message ID 20240108205209.838365-13-maxtram95@gmail.com
State New
Headers show
Series Improvements for tracking scalars in the BPF verifier | expand

Commit Message

Maxim Mikityanskiy Jan. 8, 2024, 8:52 p.m. UTC 
From: Maxim Mikityanskiy <maxim@isovalent.com>

When the width of a fill is smaller than the width of the preceding
spill, the information about scalar boundaries can still be preserved,
as long as it's coerced to the right width (done by coerce_reg_to_size).
Even further, if the actual value fits into the fill width, the ID can
be preserved as well for further tracking of equal scalars.

Implement the above improvements, which makes narrowing fills behave the
same as narrowing spills and MOVs between registers.

Two tests are adjusted to accommodate for endianness differences and to
take into account that it's now allowed to do a narrowing fill from the
least significant bits.

reg_bounds_sync is added to coerce_reg_to_size to correctly adjust
umin/umax boundaries after the var_off truncation, for example, a 64-bit
value 0xXXXXXXXX00000000, when read as a 32-bit, gets umin = 0, umax =
0xFFFFFFFF, var_off = (0x0; 0xffffffff00000000), which needs to be
synced down to umax = 0, otherwise reg_bounds_sanity_check doesn't pass.

Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
---
 include/linux/bpf_verifier.h                  |  2 --
 include/linux/filter.h                        | 12 ++++++++
 kernel/bpf/verifier.c                         | 15 +++++++---
 .../selftests/bpf/progs/verifier_spill_fill.c | 28 +++++++++++++------
 4 files changed, 42 insertions(+), 15 deletions(-)

Comments

Andrii Nakryiko Jan. 9, 2024, 11:51 p.m. UTC | #1 
On Mon, Jan 8, 2024 at 12:53 PM Maxim Mikityanskiy <maxtram95@gmail.com> wrote:
>
> From: Maxim Mikityanskiy <maxim@isovalent.com>
>
> When the width of a fill is smaller than the width of the preceding
> spill, the information about scalar boundaries can still be preserved,
> as long as it's coerced to the right width (done by coerce_reg_to_size).
> Even further, if the actual value fits into the fill width, the ID can
> be preserved as well for further tracking of equal scalars.
>
> Implement the above improvements, which makes narrowing fills behave the
> same as narrowing spills and MOVs between registers.
>
> Two tests are adjusted to accommodate for endianness differences and to
> take into account that it's now allowed to do a narrowing fill from the
> least significant bits.
>
> reg_bounds_sync is added to coerce_reg_to_size to correctly adjust
> umin/umax boundaries after the var_off truncation, for example, a 64-bit
> value 0xXXXXXXXX00000000, when read as a 32-bit, gets umin = 0, umax =
> 0xFFFFFFFF, var_off = (0x0; 0xffffffff00000000), which needs to be
> synced down to umax = 0, otherwise reg_bounds_sanity_check doesn't pass.
>
> Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
> ---
>  include/linux/bpf_verifier.h                  |  2 --
>  include/linux/filter.h                        | 12 ++++++++
>  kernel/bpf/verifier.c                         | 15 +++++++---
>  .../selftests/bpf/progs/verifier_spill_fill.c | 28 +++++++++++++------
>  4 files changed, 42 insertions(+), 15 deletions(-)
>
> diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
> index e11baecbde68..95ea7657f07e 100644
> --- a/include/linux/bpf_verifier.h
> +++ b/include/linux/bpf_verifier.h
> @@ -239,8 +239,6 @@ enum bpf_stack_slot_type {
>         STACK_ITER,
>  };
>
> -#define BPF_REG_SIZE 8 /* size of eBPF register in bytes */
> -
>  #define BPF_REGMASK_ARGS ((1 << BPF_REG_1) | (1 << BPF_REG_2) | \
>                           (1 << BPF_REG_3) | (1 << BPF_REG_4) | \
>                           (1 << BPF_REG_5))
> diff --git a/include/linux/filter.h b/include/linux/filter.h
> index 68fb6c8142fe..be784be7ed4e 100644
> --- a/include/linux/filter.h
> +++ b/include/linux/filter.h
> @@ -39,6 +39,8 @@ struct sock_reuseport;
>  struct ctl_table;
>  struct ctl_table_header;
>
> +#define BPF_REG_SIZE 8 /* size of eBPF register in bytes */
> +
>  /* ArgX, context and stack frame pointer register positions. Note,
>   * Arg1, Arg2, Arg3, etc are used as argument mappings of function
>   * calls in BPF_CALL instruction.
> @@ -881,6 +883,16 @@ bpf_ctx_narrow_access_offset(u32 off, u32 size, u32 size_default)
>
>  #define bpf_classic_proglen(fprog) (fprog->len * sizeof(fprog->filter[0]))
>
> +static inline bool
> +bpf_stack_narrow_access_ok(int off, int size, int spill_size)

this is used by verifier.c, right? So why not add this to bpf_verifier.h?


nit: given we have spill_size, should we s/size/fill_size/ for symmetry?

> +{
> +#ifdef __BIG_ENDIAN
> +       off -= spill_size - size;
> +#endif
> +
> +       return !(off % BPF_REG_SIZE);
> +}
> +
>  static inline void bpf_prog_lock_ro(struct bpf_prog *fp)
>  {
>  #ifndef CONFIG_BPF_JIT_ALWAYS_ON

[...]
diff mbox series

Patch

diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index e11baecbde68..95ea7657f07e 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -239,8 +239,6 @@  enum bpf_stack_slot_type {
 	STACK_ITER,
 };
 
-#define BPF_REG_SIZE 8	/* size of eBPF register in bytes */
-
 #define BPF_REGMASK_ARGS ((1 << BPF_REG_1) | (1 << BPF_REG_2) | \
 			  (1 << BPF_REG_3) | (1 << BPF_REG_4) | \
 			  (1 << BPF_REG_5))
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 68fb6c8142fe..be784be7ed4e 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -39,6 +39,8 @@  struct sock_reuseport;
 struct ctl_table;
 struct ctl_table_header;
 
+#define BPF_REG_SIZE 8	/* size of eBPF register in bytes */
+
 /* ArgX, context and stack frame pointer register positions. Note,
  * Arg1, Arg2, Arg3, etc are used as argument mappings of function
  * calls in BPF_CALL instruction.
@@ -881,6 +883,16 @@  bpf_ctx_narrow_access_offset(u32 off, u32 size, u32 size_default)
 
 #define bpf_classic_proglen(fprog) (fprog->len * sizeof(fprog->filter[0]))
 
+static inline bool
+bpf_stack_narrow_access_ok(int off, int size, int spill_size)
+{
+#ifdef __BIG_ENDIAN
+	off -= spill_size - size;
+#endif
+
+	return !(off % BPF_REG_SIZE);
+}
+
 static inline void bpf_prog_lock_ro(struct bpf_prog *fp)
 {
 #ifndef CONFIG_BPF_JIT_ALWAYS_ON
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index e7fff5f5aa1d..aeb3e198a5ea 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -4774,7 +4774,8 @@  static int check_stack_read_fixed_off(struct bpf_verifier_env *env,
 			if (dst_regno < 0)
 				return 0;
 
-			if (!(off % BPF_REG_SIZE) && size == spill_size) {
+			if (size <= spill_size &&
+			    bpf_stack_narrow_access_ok(off, size, spill_size)) {
 				/* The earlier check_reg_arg() has decided the
 				 * subreg_def for this insn.  Save it first.
 				 */
@@ -4782,6 +4783,12 @@  static int check_stack_read_fixed_off(struct bpf_verifier_env *env,
 
 				copy_register_state(&state->regs[dst_regno], reg);
 				state->regs[dst_regno].subreg_def = subreg_def;
+
+				/* Break the relation on a narrowing fill.
+				 * coerce_reg_to_size will adjust the boundaries.
+				 */
+				if (get_reg_width(reg) > size * BITS_PER_BYTE)
+					state->regs[dst_regno].id = 0;
 			} else {
 				int spill_cnt = 0, zero_cnt = 0;
 
@@ -6057,10 +6064,10 @@  static void coerce_reg_to_size(struct bpf_reg_state *reg, int size)
 	 * values are also truncated so we push 64-bit bounds into
 	 * 32-bit bounds. Above were truncated < 32-bits already.
 	 */
-	if (size < 4) {
+	if (size < 4)
 		__mark_reg32_unbounded(reg);
-		reg_bounds_sync(reg);
-	}
+
+	reg_bounds_sync(reg);
 }
 
 static void set_sext64_default_val(struct bpf_reg_state *reg, int size)
diff --git a/tools/testing/selftests/bpf/progs/verifier_spill_fill.c b/tools/testing/selftests/bpf/progs/verifier_spill_fill.c
index cc6c5a3b464b..fab8ae9fe947 100644
--- a/tools/testing/selftests/bpf/progs/verifier_spill_fill.c
+++ b/tools/testing/selftests/bpf/progs/verifier_spill_fill.c
@@ -217,7 +217,7 @@  __naked void uninit_u32_from_the_stack(void)
 
 SEC("tc")
 __description("Spill a u32 const scalar.  Refill as u16.  Offset to skb->data")
-__failure __msg("invalid access to packet")
+__success __retval(0)
 __naked void u16_offset_to_skb_data(void)
 {
 	asm volatile ("					\
@@ -225,19 +225,24 @@  __naked void u16_offset_to_skb_data(void)
 	r3 = *(u32*)(r1 + %[__sk_buff_data_end]);	\
 	w4 = 20;					\
 	*(u32*)(r10 - 8) = r4;				\
-	r4 = *(u16*)(r10 - 8);				\
+	r4 = *(u16*)(r10 - %[offset]);			\
 	r0 = r2;					\
-	/* r0 += r4 R0=pkt R2=pkt R3=pkt_end R4=umax=65535 */\
+	/* r0 += r4 R0=pkt R2=pkt R3=pkt_end R4=20 */\
 	r0 += r4;					\
-	/* if (r0 > r3) R0=pkt,umax=65535 R2=pkt R3=pkt_end R4=umax=65535 */\
+	/* if (r0 > r3) R0=pkt,off=20 R2=pkt R3=pkt_end R4=20 */\
 	if r0 > r3 goto l0_%=;				\
-	/* r0 = *(u32 *)r2 R0=pkt,umax=65535 R2=pkt R3=pkt_end R4=20 */\
+	/* r0 = *(u32 *)r2 R0=pkt,off=20 R2=pkt R3=pkt_end R4=20 */\
 	r0 = *(u32*)(r2 + 0);				\
 l0_%=:	r0 = 0;						\
 	exit;						\
 "	:
 	: __imm_const(__sk_buff_data, offsetof(struct __sk_buff, data)),
-	  __imm_const(__sk_buff_data_end, offsetof(struct __sk_buff, data_end))
+	  __imm_const(__sk_buff_data_end, offsetof(struct __sk_buff, data_end)),
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+	  __imm_const(offset, 8)
+#else
+	  __imm_const(offset, 6)
+#endif
 	: __clobber_all);
 }
 
@@ -268,7 +273,7 @@  l0_%=:	r0 = 0;						\
 }
 
 SEC("tc")
-__description("Spill a u32 const scalar.  Refill as u16 from fp-6.  Offset to skb->data")
+__description("Spill a u32 const scalar.  Refill as u16 from MSB.  Offset to skb->data")
 __failure __msg("invalid access to packet")
 __naked void _6_offset_to_skb_data(void)
 {
@@ -277,7 +282,7 @@  __naked void _6_offset_to_skb_data(void)
 	r3 = *(u32*)(r1 + %[__sk_buff_data_end]);	\
 	w4 = 20;					\
 	*(u32*)(r10 - 8) = r4;				\
-	r4 = *(u16*)(r10 - 6);				\
+	r4 = *(u16*)(r10 - %[offset]);			\
 	r0 = r2;					\
 	/* r0 += r4 R0=pkt R2=pkt R3=pkt_end R4=umax=65535 */\
 	r0 += r4;					\
@@ -289,7 +294,12 @@  l0_%=:	r0 = 0;						\
 	exit;						\
 "	:
 	: __imm_const(__sk_buff_data, offsetof(struct __sk_buff, data)),
-	  __imm_const(__sk_buff_data_end, offsetof(struct __sk_buff, data_end))
+	  __imm_const(__sk_buff_data_end, offsetof(struct __sk_buff, data_end)),
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+	  __imm_const(offset, 6)
+#else
+	  __imm_const(offset, 8)
+#endif
 	: __clobber_all);
 }