diff mbox series

[v4,3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions

Message ID 20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-3-cdd5c57ff1dc@linaro.org
State New
Headers show
Series [v4,1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible | expand

Commit Message

Bryan O'Donoghue Jan. 11, 2024, 5:15 p.m. UTC
sc8280xp has four Camera Control Interface (CCI) blocks which pinout to
two I2C master controllers for each CCI.

The CCI I2C pins are not muxed so we define them in the dtsi.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 307 +++++++++++++++++++++++++++++++++
 1 file changed, 307 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index febf28356ff8..1949b4fa04e9 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3451,6 +3451,169 @@  usb_1_role_switch: endpoint {
 			};
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-1 = <&cci0_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci1_default>;
+			pinctrl-1 = <&cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac4c000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4c000 0 0x1000>;
+
+			interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci2_default>;
+			pinctrl-1 = <&cci2_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci3: cci@ac4d000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4d000 0 0x1000>;
+
+			interrupts = <GIC_SPI 650 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_3_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci3_default>;
+			pinctrl-1 = <&cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci3_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci3_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc8280xp-camcc";
 			reg = <0 0x0ad00000 0 0x20000>;
@@ -4076,6 +4239,150 @@  tlmm: pinctrl@f100000 {
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 230>;
 			wakeup-parent = <&pdc>;
+
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio113", "gpio114";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci0_i2c1_default: cci0-i2c1-default-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio115", "gpio116";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio113", "gpio114";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio115", "gpio116";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio10","gpio11";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci1_i2c1_default: cci1-i2c1-default-pins {
+					/* cci_i2c_sda3, cci_i2c_scl3 */
+					pins = "gpio123","gpio124";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio10","gpio11";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+					/* cci_i2c_sda3, cci_i2c_scl3 */
+					pins = "gpio123","gpio124";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_default: cci2-default-state {
+				cci2_i2c0_default: cci2-i2c0-default-pins {
+					/* cci_i2c_sda4, cci_i2c_scl4 */
+					pins = "gpio117","gpio118";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci2_i2c1_default: cci2-i2c1-default-pins {
+					/* cci_i2c_sda5, cci_i2c_scl5 */
+					pins = "gpio12","gpio13";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				cci2_i2c0_sleep: cci2-i2c0-sleep-pins {
+					/* cci_i2c_sda4, cci_i2c_scl4 */
+					pins = "gpio117","gpio118";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci2_i2c1_sleep: cci2-i2c1-sleep-pins {
+					/* cci_i2c_sda5, cci_i2c_scl5 */
+					pins = "gpio12","gpio13";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci3_default: cci3-default-state {
+				cci3_i2c0_default: cci3-i2c0-default-pins {
+					/* cci_i2c_sda6, cci_i2c_scl6 */
+					pins = "gpio145","gpio146";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci3_i2c1_default: cci3-i2c1-default-pins {
+					/* cci_i2c_sda7, cci_i2c_scl7 */
+					pins = "gpio164","gpio165";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				cci3_i2c0_sleep: cci3-i2c0-sleep-pins {
+					/* cci_i2c_sda6, cci_i2c_scl6 */
+					pins = "gpio145","gpio146";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci3_i2c1_sleep: cci3-i2c1-sleep-pins {
+					/* cci_i2c_sda7, cci_i2c_scl7 */
+					pins = "gpio164","gpio165";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
 		};
 
 		apps_smmu: iommu@15000000 {