| Message ID | ZahG7xgHJ4Tf8mHI@shikoro |
|---|---|
| State | New |
| Headers | show |
| Series | [PULL,REQUEST] i2c-for-6.8-rc1-fixed | expand |
On Wed, 17 Jan 2024 at 13:30, Wolfram Sang <wsa@kernel.org> wrote: > > And a big series for the > designware-driver needed to be reverted because issues have been > reported late in the cycle and no incremental fix has been found yet. > This is the fixed pull requested with a missing revert added. Honestly, with three quarters of the commits being the broken series, followed by reverting it, I get the feeling that this would be better rebased. I don't like rebasing, but I also don't like "look, we had most of these commits broken, so we just reverted them all" all noticed before it even hits my tree. So I really feel like at that point you go "this branch was a failure" and start anew - aka rebase. Along with a big explanation of why a recent rebase ended up happening, so that there is no confusion about it. Linus
The following changes since commit 2cc14f52aeb78ce3f29677c2de1f06c0e91471ab: Linux 6.7-rc3 (2023-11-26 19:59:33 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-for-6.8-rc1-fixed for you to fetch changes up to 77fbab12e7e7b381dcf4ac523dfc3bfcbf5e2698: Revert "i2c: designware: Fix PM calls order in dw_i2c_plat_probe()" (2024-01-17 22:19:51 +0100) ---------------------------------------------------------------- This cycle, I2C removes the currently unused CLASS_DDC support (controllers set the flag, but there is no client to use it). Also, CLASS_SPD support gets simplified to prepare removal in the future. Class based instantiation is not recommended these days anyhow. Furthermore, I2C core now creates a debugfs directory per I2C adapter. Current bus driver users were converted to use it. Then, there are also quite some driver updates. Standing out are patches for the wmt-driver which is refactored to support more variants. And a big series for the designware-driver needed to be reverted because issues have been reported late in the cycle and no incremental fix has been found yet. This is the fixed pull requested with a missing revert added. ---------------------------------------------------------------- Alain Volmat (6): i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: simplify status messages in case of errors dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: perform I2C_ISR read once at beginning of event isr i2c: stm32f7: add support for stm32mp25 soc Alexander Stein (1): i2c: imx: Make SDA actually optional for bus recovering Andy Shevchenko (24): i2c: designware: Fix PM calls order in dw_i2c_plat_probe() i2c: designware: Fix reset call order in dw_i2c_plat_probe() i2c: designware: Let PCI core to take care about interrupt vectors i2c: designware: Fix lock probe call order in dw_i2c_plat_probe() i2c: designware: Replace a while-loop by for-loop i2c: designware: Save pointer to semaphore callbacks instead of index i2c: designware: Add missing 'c' into PCI IDs variable name i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() i2c: designware: Unify terminator in device ID tables i2c: designware: Always provide device ID tables i2c: designware: Drop return value from i2c_dw_acpi_configure() i2c: designware: Drop return value from dw_i2c_of_configure() i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure() i2c: designware: Consolidate firmware parsing and configuring code i2c: designware: Unify the firmware type checks i2c: designware: Move exports to I2C_DW namespaces i2c: designware: Remove ->disable() callback i2c: designware: Consolidate PM ops i2c: designware: Uninline i2c_dw_probe() i2c: designware: Propagate firmware node i2c: designware: Use pci_get_drvdata() i2c: designware: Use temporary variable for struct device i2c: designware: Get rid of redundant 'else' i2c: designware: Fix spelling and other issues in the comments Bartosz Golaszewski (1): eeprom: at24: use of_match_ptr() Christophe Leroy (1): i2c: cpm: Remove linux,i2c-index conversion from be32 Greg Kroah-Hartman (1): i2c: make i2c_bus_type const Hans Hu (5): i2c: wmt: Reduce redundant: bus busy check i2c: wmt: Reduce redundant: wait event complete i2c: wmt: Reduce redundant: clock mode setting i2c: wmt: Reduce redundant: function parameter i2c: wmt: Reduce redundant: REG_CR setting Heiner Kallweit (9): drm: remove I2C_CLASS_DDC support fbdev: remove I2C_CLASS_DDC support include/linux/i2c.h: remove I2C_CLASS_DDC support drm/amd/pm: Remove I2C_CLASS_SPD support i2c: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON i2c: stub: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON media: netup_unidvb: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON staging: greybus: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON i2c: mux: reg: Remove class-based device auto-detection support Jean Delvare (1): i2c: smbus: Support up to 8 SPD EEPROMs Marek Szyprowski (3): i2c: s3c24xx: fix read transfers in polling mode i2c: s3c24xx: fix transferring more than one message in polling mode i2c: s3c24xx: add support for atomic transfers Paul Menzel (2): i2c: i801: Add lis3lv02d for Dell Precision 3540 i2c: i801: Add lis3lv02d for Dell XPS 15 7590 Philipp Zabel (1): dt-bindings: at24: add ROHM BR24G04 Tim Lunn (1): i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126 Wolfram Sang (32): Merge branch 'i2c/remove-ddc-class-immutable' into i2c/for-mergewindow i2c: create debugfs entry per adapter i2c: gpio: move to per-adapter debugfs directory i2c: npcm7xx: move to per-adapter debugfs directory i2c: rcar: introduce Gen4 devices i2c: rcar: add FastMode+ support for Gen4 Merge tag 'at24-updates-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow MAINTAINERS: use proper email for my I2C work Revert "i2c: designware: Fix spelling and other issues in the comments" Revert "i2c: designware: Get rid of redundant 'else'" Revert "i2c: designware: Use temporary variable for struct device" Revert "i2c: designware: Use pci_get_drvdata()" Revert "i2c: designware: Propagate firmware node" Revert "i2c: designware: Uninline i2c_dw_probe()" Revert "i2c: designware: Consolidate PM ops" Revert "i2c: designware: Remove ->disable() callback" Revert "i2c: designware: Move exports to I2C_DW namespaces" Revert "i2c: designware: Unify the firmware type checks" Revert "i2c: designware: Consolidate firmware parsing and configuring code" Revert "i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()" Revert "i2c: designware: Drop return value from dw_i2c_of_configure()" Revert "i2c: designware: Drop return value from i2c_dw_acpi_configure()" Revert "i2c: designware: Always provide device ID tables" Revert "i2c: designware: Unify terminator in device ID tables" Revert "i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()" Revert "i2c: designware: Add missing 'c' into PCI IDs variable name" Revert "i2c: designware: Save pointer to semaphore callbacks instead of index" Revert "i2c: designware: Replace a while-loop by for-loop" Revert "i2c: designware: Fix lock probe call order in dw_i2c_plat_probe()" Revert "i2c: designware: Let PCI core to take care about interrupt vectors" Revert "i2c: designware: Fix reset call order in dw_i2c_plat_probe()" Revert "i2c: designware: Fix PM calls order in dw_i2c_plat_probe()" with much appreciated quality assurance from ---------------------------------------------------------------- Andi Shyti (37): (Rev.) i2c: stm32f7: simplify status messages in case of errors (Rev.) i2c: stm32f7: perform most of irq job in threaded handler (Rev.) i2c: i801: Add lis3lv02d for Dell XPS 15 7590 (Rev.) i2c: i801: Add lis3lv02d for Dell Precision 3540 (Rev.) i2c: cpm: Remove linux,i2c-index conversion from be32 (Rev.) i2c: imx: Make SDA actually optional for bus recovering (Rev.) i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126 (Rev.) i2c: s3c24xx: add support for atomic transfers (Rev.) i2c: s3c24xx: fix transferring more than one message in polling mode (Rev.) i2c: s3c24xx: fix read transfers in polling mode (Rev.) i2c: rcar: add FastMode+ support for Gen4 (Rev.) i2c: rcar: introduce Gen4 devices (Rev.) i2c: designware: Fix spelling and other issues in the comments (Rev.) i2c: designware: Get rid of redundant 'else' (Rev.) i2c: designware: Use temporary variable for struct device (Rev.) i2c: designware: Use pci_get_drvdata() (Rev.) i2c: designware: Propagate firmware node (Rev.) i2c: designware: Uninline i2c_dw_probe() (Rev.) i2c: designware: Consolidate PM ops (Rev.) i2c: designware: Remove ->disable() callback (Rev.) i2c: designware: Move exports to I2C_DW namespaces (Rev.) i2c: designware: Unify the firmware type checks (Rev.) i2c: designware: Consolidate firmware parsing and configuring code (Rev.) i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure() (Rev.) i2c: designware: Drop return value from dw_i2c_of_configure() (Rev.) i2c: designware: Drop return value from i2c_dw_acpi_configure() (Rev.) i2c: designware: Always provide device ID tables (Rev.) i2c: designware: Unify terminator in device ID tables (Rev.) i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() (Rev.) i2c: designware: Add missing 'c' into PCI IDs variable name (Rev.) i2c: designware: Save pointer to semaphore callbacks instead of index (Rev.) i2c: designware: Replace a while-loop by for-loop (Rev.) i2c: designware: Fix lock probe call order in dw_i2c_plat_probe() (Rev.) i2c: designware: Let PCI core to take care about interrupt vectors (Rev.) i2c: designware: Fix reset call order in dw_i2c_plat_probe() (Rev.) i2c: designware: Fix PM calls order in dw_i2c_plat_probe() (Rev.) drm: remove I2C_CLASS_DDC support AngeloGioacchino Del Regno (1): (Rev.) drm: remove I2C_CLASS_DDC support Chanho Park (2): (Rev.) i2c: s3c24xx: add support for atomic transfers (Rev.) i2c: s3c24xx: fix read transfers in polling mode Conor Dooley (1): (Rev.) dt-bindings: i2c: document st,stm32mp25-i2c compatible Geert Uytterhoeven (2): (Rev.) i2c: rcar: add FastMode+ support for Gen4 (Rev.) i2c: rcar: introduce Gen4 devices Jarkko Nikula (1): (Test) i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() Mario Limonciello (11): (Rev.) i2c: designware: Fix spelling and other issues in the comments (Rev.) i2c: designware: Get rid of redundant 'else' (Rev.) i2c: designware: Use temporary variable for struct device (Rev.) i2c: designware: Unify the firmware type checks (Rev.) i2c: designware: Consolidate firmware parsing and configuring code (Rev.) i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure() (Rev.) i2c: designware: Drop return value from dw_i2c_of_configure() (Rev.) i2c: designware: Always provide device ID tables (Rev.) i2c: designware: Unify terminator in device ID tables (Rev.) i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() (Rev.) i2c: designware: Replace a while-loop by for-loop Neil Armstrong (1): (Rev.) drm: remove I2C_CLASS_DDC support Oleksij Rempel (1): (Rev.) i2c: imx: Make SDA actually optional for bus recovering Serge Semin (24): (Test) i2c: designware: Fix spelling and other issues in the comments (Test) i2c: designware: Get rid of redundant 'else' (Test) i2c: designware: Use temporary variable for struct device (Test) i2c: designware: Use pci_get_drvdata() (Test) i2c: designware: Propagate firmware node (Test) i2c: designware: Uninline i2c_dw_probe() (Test) i2c: designware: Consolidate PM ops (Test) i2c: designware: Remove ->disable() callback (Test) i2c: designware: Move exports to I2C_DW namespaces (Test) i2c: designware: Unify the firmware type checks (Test) i2c: designware: Consolidate firmware parsing and configuring code (Test) i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure() (Test) i2c: designware: Drop return value from dw_i2c_of_configure() (Test) i2c: designware: Drop return value from i2c_dw_acpi_configure() (Test) i2c: designware: Always provide device ID tables (Test) i2c: designware: Unify terminator in device ID tables (Test) i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() (Test) i2c: designware: Add missing 'c' into PCI IDs variable name (Test) i2c: designware: Save pointer to semaphore callbacks instead of index (Test) i2c: designware: Replace a while-loop by for-loop (Test) i2c: designware: Fix lock probe call order in dw_i2c_plat_probe() (Test) i2c: designware: Let PCI core to take care about interrupt vectors (Test) i2c: designware: Fix reset call order in dw_i2c_plat_probe() (Test) i2c: designware: Fix PM calls order in dw_i2c_plat_probe() Tali Perry (1): (Rev.) i2c: npcm7xx: move to per-adapter debugfs directory Thomas Zimmermann (1): (Rev.) drm: remove I2C_CLASS_DDC support Documentation/devicetree/bindings/eeprom/at24.yaml | 1 + .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 28 ++ MAINTAINERS | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c | 1 - drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 - drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 1 - .../gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 1 - .../gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c | 1 - drivers/gpu/drm/ast/ast_i2c.c | 1 - drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 1 - drivers/gpu/drm/display/drm_dp_helper.c | 1 - drivers/gpu/drm/display/drm_dp_mst_topology.c | 1 - drivers/gpu/drm/gma500/cdv_intel_dp.c | 1 - drivers/gpu/drm/gma500/intel_gmbus.c | 1 - drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c | 1 - drivers/gpu/drm/gma500/psb_intel_sdvo.c | 1 - drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c | 1 - drivers/gpu/drm/i915/display/intel_gmbus.c | 1 - drivers/gpu/drm/i915/display/intel_sdvo.c | 1 - drivers/gpu/drm/loongson/lsdc_i2c.c | 1 - drivers/gpu/drm/mediatek/mtk_hdmi_ddc.c | 1 - drivers/gpu/drm/mgag200/mgag200_i2c.c | 1 - drivers/gpu/drm/msm/hdmi/hdmi_i2c.c | 1 - drivers/gpu/drm/radeon/radeon_i2c.c | 1 - drivers/gpu/drm/rockchip/inno_hdmi.c | 1 - drivers/gpu/drm/rockchip/rk3066_hdmi.c | 1 - drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c | 1 - drivers/i2c/busses/i2c-ali1535.c | 2 +- drivers/i2c/busses/i2c-ali1563.c | 2 +- drivers/i2c/busses/i2c-ali15x3.c | 2 +- drivers/i2c/busses/i2c-amd756.c | 2 +- drivers/i2c/busses/i2c-amd8111.c | 2 +- drivers/i2c/busses/i2c-cpm.c | 2 +- drivers/i2c/busses/i2c-elektor.c | 2 +- drivers/i2c/busses/i2c-gpio.c | 36 +-- drivers/i2c/busses/i2c-i801.c | 2 + drivers/i2c/busses/i2c-ibm_iic.c | 2 +- drivers/i2c/busses/i2c-imx.c | 2 +- drivers/i2c/busses/i2c-iop3xx.c | 2 +- drivers/i2c/busses/i2c-isch.c | 2 +- drivers/i2c/busses/i2c-kempld.c | 3 +- drivers/i2c/busses/i2c-mlxcpld.c | 2 +- drivers/i2c/busses/i2c-nforce2.c | 2 +- drivers/i2c/busses/i2c-npcm7xx.c | 49 +-- drivers/i2c/busses/i2c-pasemi-pci.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 2 +- drivers/i2c/busses/i2c-rcar.c | 51 ++- drivers/i2c/busses/i2c-rk3x.c | 8 +- drivers/i2c/busses/i2c-s3c2410.c | 61 ++-- drivers/i2c/busses/i2c-scmi.c | 2 +- drivers/i2c/busses/i2c-sh7760.c | 2 +- drivers/i2c/busses/i2c-sibyte.c | 4 +- drivers/i2c/busses/i2c-sis5595.c | 2 +- drivers/i2c/busses/i2c-sis630.c | 2 +- drivers/i2c/busses/i2c-sis96x.c | 2 +- drivers/i2c/busses/i2c-stm32f7.c | 342 +++++++++++---------- drivers/i2c/busses/i2c-via.c | 2 +- drivers/i2c/busses/i2c-viapro.c | 2 +- drivers/i2c/busses/i2c-wmt.c | 117 ++----- drivers/i2c/busses/scx200_acb.c | 2 +- drivers/i2c/i2c-core-base.c | 13 +- drivers/i2c/i2c-smbus.c | 8 +- drivers/i2c/i2c-stub.c | 2 +- drivers/i2c/muxes/i2c-mux-reg.c | 4 +- drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c | 2 +- drivers/misc/eeprom/at24.c | 5 +- drivers/staging/greybus/i2c.c | 2 +- drivers/video/fbdev/core/fb_ddc.c | 1 - drivers/video/fbdev/cyber2000fb.c | 1 - drivers/video/fbdev/i740fb.c | 1 - drivers/video/fbdev/intelfb/intelfb_i2c.c | 15 +- drivers/video/fbdev/matrox/i2c-matroxfb.c | 15 +- drivers/video/fbdev/s3fb.c | 1 - drivers/video/fbdev/tdfxfb.c | 1 - drivers/video/fbdev/tridentfb.c | 1 - drivers/video/fbdev/via/via_i2c.c | 1 - include/linux/i2c.h | 5 +- include/linux/platform_data/i2c-mux-reg.h | 2 - sound/soc/rockchip/rk3399_gru_sound.c | 2 +- 79 files changed, 401 insertions(+), 455 deletions(-)