diff mbox series

[v4,6/8] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks

Message ID 20240119111132.1290455-7-tudor.ambarus@linaro.org
State New
Headers show
Series GS101 Oriole: CMU_PERIC0 support and USI updates | expand

Commit Message

Tudor Ambarus Jan. 19, 2024, 11:11 a.m. UTC 
Get rid of the dummy clock and start using the cmu_peric0 clocks
for the usi_uart and serial_0 nodes.

Tested the serial at 115200, 1000000 and 3000000 baudrates,
everthing went fine.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

Comments

Krzysztof Kozlowski Jan. 22, 2024, 11:15 a.m. UTC | #1 
On Fri, 19 Jan 2024 11:11:30 +0000, Tudor Ambarus wrote:
> Get rid of the dummy clock and start using the cmu_peric0 clocks
> for the usi_uart and serial_0 nodes.
> 
> Tested the serial at 115200, 1000000 and 3000000 baudrates,
> everthing went fine.
> 
> 
> [...]

Applied, thanks!

[6/8] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
      https://git.kernel.org/krzk/linux/c/e58513b2ff78c70805d3bd7d96bfd76576d4c9e3

Best regards,
Krzysztof Kozlowski Jan. 23, 2024, 7:54 a.m. UTC | #2 
On 19/01/2024 12:11, Tudor Ambarus wrote:
> Get rid of the dummy clock and start using the cmu_peric0 clocks
> for the usi_uart and serial_0 nodes.
> 
> Tested the serial at 115200, 1000000 and 3000000 baudrates,
> everthing went fine.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>

This also fails to build (and also cannot depend on driver changes
because it is a new DTS).

Dropped.

Best regards,
Krzysztof
Krzysztof Kozlowski Jan. 23, 2024, 9:54 a.m. UTC | #3 
On Fri, 19 Jan 2024 11:11:30 +0000, Tudor Ambarus wrote:
> Get rid of the dummy clock and start using the cmu_peric0 clocks
> for the usi_uart and serial_0 nodes.
> 
> Tested the serial at 115200, 1000000 and 3000000 baudrates,
> everthing went fine.
> 
> 
> [...]

Applied, thanks!

[6/8] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
      https://git.kernel.org/krzk/linux/c/3dfbd155b2e397f677f18fd3eccb8691443fb280

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 2d1344a202a9..6aa25cc4676e 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -180,14 +180,6 @@  HERA_CPU_SLEEP: cpu-hera-sleep {
 		};
 	};
 
-	/* TODO replace with CCF clock */
-	dummy_clk: clock-3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12345>;
-		clock-output-names = "pclk";
-	};
-
 	/* ect node is required to be present by bootloader */
 	ect {
 	};
@@ -367,7 +359,8 @@  usi_uart: usi@10a000c0 {
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clocks = <&dummy_clk>, <&dummy_clk>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x1020>;
 			samsung,mode = <USI_V2_UART>;
@@ -378,7 +371,8 @@  serial_0: serial@10a00000 {
 				reg = <0x10a00000 0xc0>;
 				interrupts = <GIC_SPI 634
 					      IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
 				samsung,uart-fifosize = <256>;
 				status = "disabled";