diff mbox series

[v2,1/2] dt-bindings: backlight: add Kinetic KTD2801 binding

Message ID 20240118-ktd2801-v2-1-425cf32e0769@skole.hr
State Superseded
Headers show
Series Kinetic KTD2801 backlight driver | expand

Commit Message

Duje Mihanović Jan. 18, 2024, 5:32 p.m. UTC 
Add the dt binding for the Kinetic KTD2801 backlight driver.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 .../bindings/leds/backlight/kinetic,ktd2801.yaml   | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)

Comments

Linus Walleij Jan. 19, 2024, 8:48 a.m. UTC | #1 
Hi Duje,

thanks for your patch!

On Thu, Jan 18, 2024 at 6:33 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote:

> Add the dt binding for the Kinetic KTD2801 backlight driver.

Maybe add some commit message?

> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
(...)
> +  ctrl-gpios:
> +    maxItems: 1

First I thought this was inconsistent with ktd253, then
I looked at the datasheets and they really did change "en" to "ctrl" so
this needs a new name indeed.

With commit message added:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml
new file mode 100644
index 000000000000..b005065e0f48
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml
@@ -0,0 +1,46 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD2801 one-wire backlight
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The Kinetic Technologies KTD2801 is a LED backlight driver controlled
+  by a single GPIO line. The driver can be controlled with a PWM signal
+  or by pulsing the GPIO line to set the backlight level. This is called
+  "ExpressWire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktd2801
+
+  ctrl-gpios:
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - ctrl-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight {
+        compatible = "kinetic,ktd2801";
+        ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+        max-brightness = <210>;
+        default-brightness = <100>;
+    };