diff mbox

[edk2,v3,09/10] MmcDxe: expand to support multiple blocks

Message ID 1474470147-23156-10-git-send-email-haojian.zhuang@linaro.org
State Superseded
Headers show

Commit Message

Haojian Zhuang Sept. 21, 2016, 3:02 p.m. UTC
Make use of DMA to transfer multiple blocks at one time. It could
improve the performance on MMC/SD driver.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

---
 EmbeddedPkg/Include/Protocol/MmcHost.h    |   6 +
 EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c | 175 ++++++++++++++++++++----------
 2 files changed, 122 insertions(+), 59 deletions(-)

-- 
2.7.4

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
diff mbox

Patch

diff --git a/EmbeddedPkg/Include/Protocol/MmcHost.h b/EmbeddedPkg/Include/Protocol/MmcHost.h
index e9a74f0..62501a0 100644
--- a/EmbeddedPkg/Include/Protocol/MmcHost.h
+++ b/EmbeddedPkg/Include/Protocol/MmcHost.h
@@ -62,6 +62,7 @@  typedef UINT32 MMC_CMD;
 #define MMC_CMD20             (MMC_INDX(20) | MMC_CMD_WAIT_RESPONSE)
 #define MMC_CMD23             (MMC_INDX(23) | MMC_CMD_WAIT_RESPONSE)
 #define MMC_CMD24             (MMC_INDX(24) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD25             (MMC_INDX(25) | MMC_CMD_WAIT_RESPONSE)
 #define MMC_CMD55             (MMC_INDX(55) | MMC_CMD_WAIT_RESPONSE)
 #define MMC_ACMD41            (MMC_INDX(41) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
 #define MMC_ACMD51            (MMC_INDX(51) | MMC_CMD_WAIT_RESPONSE)
@@ -152,6 +153,10 @@  typedef EFI_STATUS (EFIAPI *MMC_SETIOS) (
   IN  UINT32                    TimingMode
   );
 
+typedef BOOLEAN (EFIAPI *MMC_ISMULTIBLOCK) (
+  IN  EFI_MMC_HOST_PROTOCOL     *This
+  );
+
 
 struct _EFI_MMC_HOST_PROTOCOL {
 
@@ -169,6 +174,7 @@  struct _EFI_MMC_HOST_PROTOCOL {
   MMC_WRITEBLOCKDATA      WriteBlockData;
 
   MMC_SETIOS              SetIos;
+  MMC_ISMULTIBLOCK        IsMultiBlock;
 
 };
 
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c b/EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c
index 0e1ef57..3bfae08 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c
@@ -126,6 +126,95 @@  MmcStopTransmission (
 #define MMCI0_BLOCKLEN 512
 #define MMCI0_TIMEOUT  10000
 
+STATIC EFI_STATUS
+MmcTransferBlock (
+  IN EFI_BLOCK_IO_PROTOCOL    *This,
+  IN UINTN                    Cmd,
+  IN UINTN                    Transfer,
+  IN UINT32                   MediaId,
+  IN EFI_LBA                  Lba,
+  IN UINTN                    BufferSize,
+  OUT VOID                    *Buffer
+  )
+{
+  EFI_STATUS              Status;
+  UINTN                   CmdArg;
+  INTN                    Timeout;
+  UINT32                  Response[4];
+  MMC_HOST_INSTANCE       *MmcHostInstance;
+  EFI_MMC_HOST_PROTOCOL   *MmcHost;
+
+  MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
+  MmcHost = MmcHostInstance->MmcHost;
+
+  //Set command argument based on the card access mode (Byte mode or Block mode)
+  if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {
+    CmdArg = Lba;
+  } else {
+    CmdArg = Lba * This->Media->BlockSize;
+  }
+
+  Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((EFI_D_ERROR, "%a(MMC_CMD%d): Error %r\n", __func__, Cmd, Status));
+    return Status;
+  }
+
+  if (Transfer == MMC_IOBLOCKS_READ) {
+    // Read Data
+    Status = MmcHost->ReadBlockData (MmcHost, Lba, BufferSize, Buffer);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_BLKIO, "%a(): Error Read Block Data and Status = %r\n", __func__, Status));
+      MmcStopTransmission (MmcHost);
+      return Status;
+    }
+    Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_ERROR, "%a() : Error MmcProgrammingState\n", __func__));
+      return Status;
+    }
+  } else {
+    // Write Data
+    Status = MmcHost->WriteBlockData (MmcHost, Lba, BufferSize, Buffer);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_BLKIO, "%a(): Error Write Block Data and Status = %r\n", __func__, Status));
+      MmcStopTransmission (MmcHost);
+      return Status;
+    }
+  }
+
+  // Command 13 - Read status and wait for programming to complete (return to tran)
+  Timeout = MMCI0_TIMEOUT;
+  CmdArg = MmcHostInstance->CardInfo.RCA << 16;
+  Response[0] = 0;
+  while(   (!(Response[0] & MMC_R0_READY_FOR_DATA))
+        && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
+        && Timeout--) {
+    Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
+    if (!EFI_ERROR (Status)) {
+      MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
+      if ((Response[0] & MMC_R0_READY_FOR_DATA)) {
+        break;  // Prevents delay once finished
+      }
+    }
+    gBS->Stall (1);
+  }
+
+  if (BufferSize > This->Media->BlockSize) {
+    Status = MmcHost->SendCommand (MmcHost, MMC_CMD12, 0);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_BLKIO, "%a(): Error and Status:%r\n", __func__, Status));
+    }
+  }
+
+  Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
+    return Status;
+  }
+  return Status;
+}
+
 EFI_STATUS
 MmcIoBlocks (
   IN EFI_BLOCK_IO_PROTOCOL    *This,
@@ -145,6 +234,7 @@  MmcIoBlocks (
   EFI_MMC_HOST_PROTOCOL   *MmcHost;
   UINTN                   BytesRemainingToBeTransfered;
   UINTN                   BlockCount;
+  UINTN                   ConsumeSize;
 
   BlockCount = 1;
   MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
@@ -165,6 +255,10 @@  MmcIoBlocks (
     return EFI_NO_MEDIA;
   }
 
+  if (MmcHost->IsMultiBlock && MmcHost->IsMultiBlock(MmcHost)) {
+    BlockCount = (BufferSize + This->Media->BlockSize - 1) / This->Media->BlockSize;
+  }
+
   // All blocks must be within the device
   if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)) {
     return EFI_INVALID_PARAMETER;
@@ -210,75 +304,38 @@  MmcIoBlocks (
       return EFI_NOT_READY;
     }
 
-    //Set command argument based on the card access mode (Byte mode or Block mode)
-    if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {
-      CmdArg = Lba;
-    } else {
-      CmdArg = Lba * This->Media->BlockSize;
-    }
-
-    if (Transfer == MMC_IOBLOCKS_READ) {
-      // Read a single block
-      Cmd = MMC_CMD17;
-    } else {
-      // Write a single block
-      Cmd = MMC_CMD24;
-    }
-    Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
-    if (EFI_ERROR (Status)) {
-      DEBUG ((EFI_D_ERROR, "MmcIoBlocks(MMC_CMD%d): Error %r\n", Cmd, Status));
-      return Status;
-    }
-
     if (Transfer == MMC_IOBLOCKS_READ) {
-      // Read one block of Data
-      Status = MmcHost->ReadBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);
-      if (EFI_ERROR (Status)) {
-        DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Read Block Data and Status = %r\n", Status));
-        MmcStopTransmission (MmcHost);
-        return Status;
-      }
-      Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
-      if (EFI_ERROR (Status)) {
-        DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcProgrammingState\n"));
-        return Status;
+      if (BlockCount == 1) {
+        // Read a single block
+        Cmd = MMC_CMD17;
+      } else {
+	// Read multiple blocks
+	Cmd = MMC_CMD18;
       }
     } else {
-      // Write one block of Data
-      Status = MmcHost->WriteBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);
-      if (EFI_ERROR (Status)) {
-        DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Write Block Data and Status = %r\n", Status));
-        MmcStopTransmission (MmcHost);
-        return Status;
+      if (BlockCount == 1) {
+        // Write a single block
+        Cmd = MMC_CMD24;
+      } else {
+	// Write multiple blocks
+	Cmd = MMC_CMD25;
       }
     }
 
-    // Command 13 - Read status and wait for programming to complete (return to tran)
-    Timeout = MMCI0_TIMEOUT;
-    CmdArg = MmcHostInstance->CardInfo.RCA << 16;
-    Response[0] = 0;
-    while(   (!(Response[0] & MMC_R0_READY_FOR_DATA))
-          && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
-          && Timeout--) {
-      Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
-      if (!EFI_ERROR (Status)) {
-        MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
-        if ((Response[0] & MMC_R0_READY_FOR_DATA)) {
-          break;  // Prevents delay once finished
-        }
-      }
-      gBS->Stall (1);
+    ConsumeSize = BlockCount * This->Media->BlockSize;
+    if (BytesRemainingToBeTransfered < ConsumeSize) {
+      ConsumeSize = BytesRemainingToBeTransfered;
     }
-
-    Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
+    Status = MmcTransferBlock (This, Cmd, Transfer, MediaId, Lba, ConsumeSize, Buffer);
     if (EFI_ERROR (Status)) {
-      DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
-      return Status;
+      DEBUG ((EFI_D_ERROR, "%a(): Failed to transfer block and Status:%r\n", __func__, Status));
     }
 
-    BytesRemainingToBeTransfered -= This->Media->BlockSize;
-    Lba    += BlockCount;
-    Buffer = (UINT8 *)Buffer + This->Media->BlockSize;
+    BytesRemainingToBeTransfered -= ConsumeSize;
+    if (BytesRemainingToBeTransfered > 0) {
+      Lba    += BlockCount;
+      Buffer = (UINT8 *)Buffer + ConsumeSize;
+    }
   }
 
   return EFI_SUCCESS;