@@ -101,11 +101,17 @@
#define PHY_CORE_VOLTAGE_MASK BIT(31)
#define PHY_PLL_REFCLK_MASK GENMASK(3, 0)
+/* USB PHY2 register offsets */
+#define USB_PHY_PLL_REG12 0x130
+#define USB_PHY_PLL_LDO_REF_EN BIT(5)
+#define USB_PHY_PLL_LDO_REF_EN_EN BIT(4)
+
#define DWC3_AM62_AUTOSUSPEND_DELAY 100
struct dwc3_am62 {
struct device *dev;
void __iomem *usbss;
+ void __iomem *phy;
struct clk *usb2_refclk;
int rate_code;
struct regmap *syscon;
@@ -140,6 +146,16 @@ static inline void dwc3_ti_writel(struct dwc3_am62 *am62, u32 offset, u32 value)
writel(value, (am62->usbss) + offset);
}
+static inline u32 dwc3_ti_phy_readl(struct dwc3_am62 *am62, u32 offset)
+{
+ return readl((am62->phy) + offset);
+}
+
+static inline void dwc3_ti_phy_writel(struct dwc3_am62 *am62, u32 offset, u32 value)
+{
+ writel(value, (am62->phy) + offset);
+}
+
static int phy_syscon_pll_refclk(struct dwc3_am62 *am62)
{
struct device *dev = am62->dev;
@@ -201,6 +217,12 @@ static int dwc3_ti_probe(struct platform_device *pdev)
return PTR_ERR(am62->usbss);
}
+ am62->phy = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(am62->phy)) {
+ dev_err(dev, "can't map PHY IOMEM resource. Won't apply i2409 fix.\n");
+ am62->phy = NULL;
+ }
+
am62->usb2_refclk = devm_clk_get(dev, "ref");
if (IS_ERR(am62->usb2_refclk)) {
dev_err(dev, "can't get usb2_refclk\n");
@@ -227,6 +249,13 @@ static int dwc3_ti_probe(struct platform_device *pdev)
if (ret)
return ret;
+ /* Workaround Errata i2409 */
+ if (am62->phy) {
+ reg = dwc3_ti_phy_readl(am62, USB_PHY_PLL_REG12);
+ reg |= USB_PHY_PLL_LDO_REF_EN | USB_PHY_PLL_LDO_REF_EN_EN;
+ dwc3_ti_phy_writel(am62, USB_PHY_PLL_REG12, reg);
+ }
+
/* VBUS divider select */
am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG);
All AM62 devices have Errata i2409 [1] due to which USB2 PHY may lock up due to short suspend. Workaround involves setting bit 5 and 4 PLL_REG12 in PHY2 register space after USB controller is brought out of LPSC reset but before controller initialization. Handle this workaround. [1] - https://www.ti.com/lit/er/sprz487d/sprz487d.pdf Signed-off-by: Roger Quadros <rogerq@kernel.org> --- drivers/usb/dwc3/dwc3-am62.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)