@@ -5664,16 +5664,12 @@ static int i40e_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
if (phy_cfg.eee_capability == 0)
return -EOPNOTSUPP;
- edata->supported_u32 = SUPPORTED_Autoneg;
- edata->lp_advertised_u32 = edata->supported_u32;
-
/* Get current configuration */
status = i40e_aq_get_phy_capabilities(hw, false, false, &phy_cfg, NULL);
if (status)
return -EAGAIN;
- edata->advertised_u32 = phy_cfg.eee_capability ? SUPPORTED_Autoneg : 0U;
- edata->eee_enabled = !!edata->advertised_u32;
+ edata->eee_enabled = !!phy_cfg.eee_capability;
edata->tx_lpi_enabled = pf->stats.tx_lpi_status;
edata->eee_active = pf->stats.tx_lpi_status && pf->stats.rx_lpi_status;
@@ -5691,7 +5687,6 @@ static int i40e_is_eee_param_supported(struct net_device *netdev,
u32 value;
const char *name;
} param[] = {
- {edata->advertised_u32 & ~SUPPORTED_Autoneg, "advertise"},
{edata->tx_lpi_timer, "tx-timer"},
{edata->tx_lpi_enabled != pf->stats.tx_lpi_status, "tx-lpi"}
};
@@ -1634,7 +1634,6 @@ static int igc_ethtool_get_eee(struct net_device *netdev,
mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
*edata = adapter->eee;
- edata->supported_u32 = SUPPORTED_Autoneg;
eeer = rd32(IGC_EEER);
@@ -1647,9 +1646,6 @@ static int igc_ethtool_get_eee(struct net_device *netdev,
edata->eee_enabled = hw->dev_spec._base.eee_enable;
- edata->advertised_u32 = SUPPORTED_Autoneg;
- edata->lp_advertised_u32 = SUPPORTED_Autoneg;
-
/* Report correct negotiated EEE status for devices that
* wrongly report EEE at half-duplex
*/
Energy Efficient Ethernet should always be negotiated with the link peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for supported, advertised or lp_advertised, since it is assumed. Additionally, ethtool(1) ignores the set bit, and no other driver sets this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 7 +------ drivers/net/ethernet/intel/igc/igc_ethtool.c | 4 ---- 2 files changed, 1 insertion(+), 10 deletions(-)