diff mbox series

[v2,3/3] optee: probe RPMB device using RPMB subsystem

Message ID 20240131174347.510961-4-jens.wiklander@linaro.org
State New
Headers show
Series Replay Protected Memory Block (RPMB) subsystem | expand

Commit Message

Jens Wiklander Jan. 31, 2024, 5:43 p.m. UTC
Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and
use an RPMB device via the RPBM subsystem instead of passing the RPMB
frames via tee-supplicant in user space. A fallback mechanism is kept to
route RPMB frames via tee-supplicant if the RPMB subsystem isn't
available.

The OP-TEE RPC ABI is extended to support iterating over all RPMB
devices until one is found with the expected RPMB key already
programmed.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
 drivers/tee/optee/core.c          |   1 +
 drivers/tee/optee/ffa_abi.c       |   2 +
 drivers/tee/optee/optee_private.h |   6 +
 drivers/tee/optee/optee_rpc_cmd.h |  33 +++++
 drivers/tee/optee/rpc.c           | 221 ++++++++++++++++++++++++++++++
 drivers/tee/optee/smc_abi.c       |   2 +
 6 files changed, 265 insertions(+)

Comments

Sumit Garg Feb. 6, 2024, 11:12 a.m. UTC | #1
Hi Jens,

On Wed, 31 Jan 2024 at 23:14, Jens Wiklander <jens.wiklander@linaro.org> wrote:
>
> Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and
> use an RPMB device via the RPBM subsystem instead of passing the RPMB
> frames via tee-supplicant in user space. A fallback mechanism is kept to
> route RPMB frames via tee-supplicant if the RPMB subsystem isn't
> available.
>
> The OP-TEE RPC ABI is extended to support iterating over all RPMB
> devices until one is found with the expected RPMB key already
> programmed.
>
> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
> ---
>  drivers/tee/optee/core.c          |   1 +
>  drivers/tee/optee/ffa_abi.c       |   2 +
>  drivers/tee/optee/optee_private.h |   6 +
>  drivers/tee/optee/optee_rpc_cmd.h |  33 +++++
>  drivers/tee/optee/rpc.c           | 221 ++++++++++++++++++++++++++++++
>  drivers/tee/optee/smc_abi.c       |   2 +
>  6 files changed, 265 insertions(+)
>

[snip]

>  #endif /*__OPTEE_RPC_CMD_H*/
> diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
> index e69bc6380683..6fd6f99dafab 100644
> --- a/drivers/tee/optee/rpc.c
> +++ b/drivers/tee/optee/rpc.c
> @@ -7,6 +7,7 @@
>
>  #include <linux/delay.h>
>  #include <linux/i2c.h>
> +#include <linux/rpmb.h>
>  #include <linux/slab.h>
>  #include <linux/tee_drv.h>
>  #include "optee_private.h"
> @@ -255,6 +256,217 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
>         optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, &param);
>  }
>
> +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx,
> +                                            struct optee *optee,
> +                                            struct optee_msg_arg *arg)
> +{
> +       struct tee_param params[1];
> +
> +       if (!IS_ENABLED(CONFIG_RPMB)) {
> +               handle_rpc_supp_cmd(ctx, optee, arg);
> +               return;
> +       }
> +
> +       if (arg->num_params != ARRAY_SIZE(params) ||
> +           optee->ops->from_msg_param(optee, params, arg->num_params,
> +                                      arg->params) ||
> +           params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) {
> +               arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> +               return;
> +       }
> +
> +       params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL;
> +       params[0].u.value.b = 0;
> +       params[0].u.value.c = 0;
> +       if (optee->ops->to_msg_param(optee, arg->params,
> +                                    arg->num_params, params)) {
> +               arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> +               return;
> +       }
> +
> +       mutex_lock(&optee->rpmb_dev_mutex);
> +       rpmb_dev_put(optee->rpmb_dev);
> +       optee->rpmb_dev = NULL;
> +       mutex_unlock(&optee->rpmb_dev_mutex);
> +
> +       arg->ret = TEEC_SUCCESS;
> +}
> +
> +static int rpc_rpmb_match(struct device *dev, const void *data)
> +{
> +       return 1;
> +}
> +
> +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx,
> +                                           struct optee *optee,
> +                                           struct optee_msg_arg *arg)
> +{
> +       struct rpmb_dev *start_rdev;
> +       struct rpmb_dev *rdev;
> +       struct tee_param params[2];
> +       void *buf;
> +
> +       if (!IS_ENABLED(CONFIG_RPMB)) {
> +               handle_rpc_supp_cmd(ctx, optee, arg);
> +               return;
> +       }
> +
> +       if (arg->num_params != ARRAY_SIZE(params) ||
> +           optee->ops->from_msg_param(optee, params, arg->num_params,
> +                                      arg->params) ||
> +           params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT ||
> +           params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
> +               arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> +               return;
> +       }
> +       buf = tee_shm_get_va(params[1].u.memref.shm,
> +                            params[1].u.memref.shm_offs);
> +       if (!buf) {
> +               arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> +               return;
> +       }
> +
> +       mutex_lock(&optee->rpmb_dev_mutex);
> +       start_rdev = optee->rpmb_dev;
> +       rdev = rpmb_dev_find_device(NULL, start_rdev, rpc_rpmb_match);
> +       rpmb_dev_put(start_rdev);
> +       optee->rpmb_dev = rdev;
> +       mutex_unlock(&optee->rpmb_dev_mutex);
> +
> +       if (!rdev) {
> +               arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;

One of the major comments I have here is regarding how this implicit
dependency on eMMC driver probe is met here. What if OP-TEE based
fTPM/EFI client driver probes before eMMC driver?

-Sumit
diff mbox series

Patch

diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index 3aed554bc8d8..21bcccbe2207 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -177,6 +177,7 @@  void optee_remove_common(struct optee *optee)
 	tee_shm_pool_free(optee->pool);
 	optee_supp_uninit(&optee->supp);
 	mutex_destroy(&optee->call_queue.mutex);
+	mutex_destroy(&optee->rpmb_dev_mutex);
 }
 
 static int smc_abi_rc;
diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
index ecb5eb079408..1d207a9d4f3b 100644
--- a/drivers/tee/optee/ffa_abi.c
+++ b/drivers/tee/optee/ffa_abi.c
@@ -934,6 +934,7 @@  static int optee_ffa_probe(struct ffa_device *ffa_dev)
 	optee_cq_init(&optee->call_queue, 0);
 	optee_supp_init(&optee->supp);
 	optee_shm_arg_cache_init(optee, arg_cache_flags);
+	mutex_init(&optee->rpmb_dev_mutex);
 	ffa_dev_set_drvdata(ffa_dev, optee);
 	ctx = teedev_open(optee->teedev);
 	if (IS_ERR(ctx)) {
@@ -968,6 +969,7 @@  static int optee_ffa_probe(struct ffa_device *ffa_dev)
 	teedev_close_context(ctx);
 err_rhashtable_free:
 	rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
+	mutex_destroy(&optee->rpmb_dev_mutex);
 	optee_supp_uninit(&optee->supp);
 	mutex_destroy(&optee->call_queue.mutex);
 	mutex_destroy(&optee->ffa.mutex);
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 7a5243c78b55..3a87ad4ef1e2 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -20,6 +20,7 @@ 
 /* Some Global Platform error codes used in this driver */
 #define TEEC_SUCCESS			0x00000000
 #define TEEC_ERROR_BAD_PARAMETERS	0xFFFF0006
+#define TEEC_ERROR_ITEM_NOT_FOUND	0xFFFF0008
 #define TEEC_ERROR_NOT_SUPPORTED	0xFFFF000A
 #define TEEC_ERROR_COMMUNICATION	0xFFFF000E
 #define TEEC_ERROR_OUT_OF_MEMORY	0xFFFF000C
@@ -197,6 +198,8 @@  struct optee_ops {
  * @notif:		notification synchronization struct
  * @supp:		supplicant synchronization struct for RPC to supplicant
  * @pool:		shared memory pool
+ * @mutex:		mutex protecting @rpmb_dev
+ * @rpmb_dev:		current RPMB device or NULL
  * @rpc_param_count:	If > 0 number of RPC parameters to make room for
  * @scan_bus_done	flag if device registation was already done.
  * @scan_bus_work	workq to scan optee bus and register optee drivers
@@ -215,6 +218,9 @@  struct optee {
 	struct optee_notif notif;
 	struct optee_supp supp;
 	struct tee_shm_pool *pool;
+	/* Protects rpmb_dev pointer */
+	struct mutex rpmb_dev_mutex;
+	struct rpmb_dev *rpmb_dev;
 	unsigned int rpc_param_count;
 	bool   scan_bus_done;
 	struct work_struct scan_bus_work;
diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h
index f3f06e0994a7..672e5dcdf041 100644
--- a/drivers/tee/optee/optee_rpc_cmd.h
+++ b/drivers/tee/optee/optee_rpc_cmd.h
@@ -16,6 +16,14 @@ 
  * and sends responses.
  */
 
+/*
+ * Replay Protected Memory Block access
+ *
+ * [in]     memref[0]	    Frames to device
+ * [out]    memref[1]	    Frames from device
+ */
+#define OPTEE_RPC_CMD_RPMB		1
+
 /*
  * Get time
  *
@@ -103,4 +111,29 @@ 
 /* I2C master control flags */
 #define OPTEE_RPC_I2C_FLAGS_TEN_BIT	BIT(0)
 
+/*
+ * Reset RPMB probing
+ *
+ * Releases an eventually already used RPMB devices and starts over searching
+ * for RPMB devices. Returns the kind of shared memory to use in subsequent
+ * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls.
+ *
+ * [out]    value[0].a	    OPTEE_RPC_SHM_TYPE_*, the parameter for
+ *			    OPTEE_RPC_CMD_SHM_ALLOC
+ */
+#define OPTEE_RPC_CMD_RPMB_PROBE_RESET	22
+
+/*
+ * Probe next RPMB device
+ *
+ * [out]    value[0].a	    Must be OPTEE_RPC_RPMB_EMMC
+ * [out]    value[0].b	    EXT CSD-slice 168 "RPMB Size"
+ * [out]    value[0].c	    EXT CSD-slice 222 "Reliable Write Sector Count"
+ * [out]    memref[1]       Buffer with the raw CID
+ */
+#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT	23
+
+/* Type of RPMB device */
+#define OPTEE_RPC_RPMB_EMMC		0
+
 #endif /*__OPTEE_RPC_CMD_H*/
diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
index e69bc6380683..6fd6f99dafab 100644
--- a/drivers/tee/optee/rpc.c
+++ b/drivers/tee/optee/rpc.c
@@ -7,6 +7,7 @@ 
 
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/rpmb.h>
 #include <linux/slab.h>
 #include <linux/tee_drv.h>
 #include "optee_private.h"
@@ -255,6 +256,217 @@  void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
 	optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, &param);
 }
 
+static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx,
+					     struct optee *optee,
+					     struct optee_msg_arg *arg)
+{
+	struct tee_param params[1];
+
+	if (!IS_ENABLED(CONFIG_RPMB)) {
+		handle_rpc_supp_cmd(ctx, optee, arg);
+		return;
+	}
+
+	if (arg->num_params != ARRAY_SIZE(params) ||
+	    optee->ops->from_msg_param(optee, params, arg->num_params,
+				       arg->params) ||
+	    params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL;
+	params[0].u.value.b = 0;
+	params[0].u.value.c = 0;
+	if (optee->ops->to_msg_param(optee, arg->params,
+				     arg->num_params, params)) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	mutex_lock(&optee->rpmb_dev_mutex);
+	rpmb_dev_put(optee->rpmb_dev);
+	optee->rpmb_dev = NULL;
+	mutex_unlock(&optee->rpmb_dev_mutex);
+
+	arg->ret = TEEC_SUCCESS;
+}
+
+static int rpc_rpmb_match(struct device *dev, const void *data)
+{
+	return 1;
+}
+
+static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx,
+					    struct optee *optee,
+					    struct optee_msg_arg *arg)
+{
+	struct rpmb_dev *start_rdev;
+	struct rpmb_dev *rdev;
+	struct tee_param params[2];
+	void *buf;
+
+	if (!IS_ENABLED(CONFIG_RPMB)) {
+		handle_rpc_supp_cmd(ctx, optee, arg);
+		return;
+	}
+
+	if (arg->num_params != ARRAY_SIZE(params) ||
+	    optee->ops->from_msg_param(optee, params, arg->num_params,
+				       arg->params) ||
+	    params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT ||
+	    params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+	buf = tee_shm_get_va(params[1].u.memref.shm,
+			     params[1].u.memref.shm_offs);
+	if (!buf) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	mutex_lock(&optee->rpmb_dev_mutex);
+	start_rdev = optee->rpmb_dev;
+	rdev = rpmb_dev_find_device(NULL, start_rdev, rpc_rpmb_match);
+	rpmb_dev_put(start_rdev);
+	optee->rpmb_dev = rdev;
+	mutex_unlock(&optee->rpmb_dev_mutex);
+
+	if (!rdev) {
+		arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;
+		return;
+	}
+
+	if (params[1].u.memref.size < rdev->dev_id_len) {
+		arg->ret = TEEC_ERROR_SHORT_BUFFER;
+		return;
+	}
+	memcpy(buf, rdev->dev_id, rdev->dev_id_len);
+	params[1].u.memref.size = rdev->dev_id_len;
+	params[0].u.value.a = OPTEE_RPC_RPMB_EMMC;
+	params[0].u.value.b = rdev->capacity;
+	params[0].u.value.c = rdev->reliable_wr_count;
+	if (optee->ops->to_msg_param(optee, arg->params,
+				     arg->num_params, params)) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	arg->ret = TEEC_SUCCESS;
+}
+
+/* Request */
+struct rpmb_req {
+	u16 cmd;
+#define RPMB_CMD_DATA_REQ      0x00
+#define RPMB_CMD_GET_DEV_INFO  0x01
+	u16 dev_id;
+	u16 block_count;
+	/* Optional data frames (rpmb_data_frame) follow */
+};
+
+#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1))
+
+#define RPMB_CID_SZ 16
+
+/* Response to device info request */
+struct rpmb_dev_info {
+	u8 cid[RPMB_CID_SZ];
+	u8 rpmb_size_mult;	/* EXT CSD-slice 168: RPMB Size */
+	u8 rel_wr_sec_c;	/* EXT CSD-slice 222: Reliable Write Sector */
+				/*                    Count */
+	u8 ret_code;
+#define RPMB_CMD_GET_DEV_INFO_RET_OK     0x00
+#define RPMB_CMD_GET_DEV_INFO_RET_ERROR  0x01
+};
+
+static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size)
+{
+	struct rpmb_dev_info *dev_info;
+
+	if (rsp_size != sizeof(*dev_info))
+		return TEEC_ERROR_BAD_PARAMETERS;
+
+	dev_info = rsp;
+	memcpy(dev_info->cid, rdev->dev_id, sizeof(dev_info->cid));
+	dev_info->rpmb_size_mult = rdev->capacity;
+	dev_info->rel_wr_sec_c = rdev->reliable_wr_count;
+	dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK;
+
+	return TEEC_SUCCESS;
+}
+
+/*
+ * req is one struct rpmb_req followed by one or more struct rpmb_data_frame
+ * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame
+ */
+static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev,
+				void *req, size_t req_size,
+				void *rsp, size_t rsp_size)
+{
+	struct rpmb_req *sreq = req;
+	int rc;
+
+	if (req_size < sizeof(*sreq))
+		return TEEC_ERROR_BAD_PARAMETERS;
+
+	switch (sreq->cmd) {
+	case RPMB_CMD_DATA_REQ:
+		rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req),
+				       req_size - sizeof(struct rpmb_req),
+				       rsp, rsp_size);
+		if (rc) // TODO translate error code
+			return TEEC_ERROR_BAD_PARAMETERS;
+		return TEEC_SUCCESS;
+	case RPMB_CMD_GET_DEV_INFO:
+		return get_dev_info(rdev, rsp, rsp_size);
+	default:
+		return TEEC_ERROR_BAD_PARAMETERS;
+	}
+}
+
+static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee,
+				 struct optee_msg_arg *arg)
+{
+	struct tee_param params[2];
+	struct rpmb_dev *rdev;
+	void *p0, *p1;
+
+	mutex_lock(&optee->rpmb_dev_mutex);
+	rdev = rpmb_dev_get(optee->rpmb_dev);
+	mutex_unlock(&optee->rpmb_dev_mutex);
+	if (!rdev) {
+		handle_rpc_supp_cmd(ctx, optee, arg);
+		return;
+	}
+
+	if (arg->num_params != ARRAY_SIZE(params) ||
+	    optee->ops->from_msg_param(optee, params, arg->num_params,
+				       arg->params) ||
+	    params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT ||
+	    params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		goto out;
+	}
+
+	p0 = tee_shm_get_va(params[0].u.memref.shm,
+			    params[0].u.memref.shm_offs);
+	p1 = tee_shm_get_va(params[1].u.memref.shm,
+			    params[1].u.memref.shm_offs);
+	arg->ret = rpmb_process_request(optee, rdev, p0,
+					params[0].u.memref.size,
+					p1, params[1].u.memref.size);
+	if (arg->ret)
+		goto out;
+
+	if (optee->ops->to_msg_param(optee, arg->params,
+				     arg->num_params, params))
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+out:
+	rpmb_dev_put(rdev);
+}
+
 void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
 		   struct optee_msg_arg *arg)
 {
@@ -271,6 +483,15 @@  void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
 	case OPTEE_RPC_CMD_I2C_TRANSFER:
 		handle_rpc_func_cmd_i2c_transfer(ctx, arg);
 		break;
+	case OPTEE_RPC_CMD_RPMB_PROBE_RESET:
+		handle_rpc_func_rpmb_probe_reset(ctx, optee, arg);
+		break;
+	case OPTEE_RPC_CMD_RPMB_PROBE_NEXT:
+		handle_rpc_func_rpmb_probe_next(ctx, optee, arg);
+		break;
+	case OPTEE_RPC_CMD_RPMB:
+		handle_rpc_func_rpmb(ctx, optee, arg);
+		break;
 	default:
 		handle_rpc_supp_cmd(ctx, optee, arg);
 	}
diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
index a37f87087e5c..8c85c3b8dbb4 100644
--- a/drivers/tee/optee/smc_abi.c
+++ b/drivers/tee/optee/smc_abi.c
@@ -1715,6 +1715,7 @@  static int optee_probe(struct platform_device *pdev)
 	optee->smc.memremaped_shm = memremaped_shm;
 	optee->pool = pool;
 	optee_shm_arg_cache_init(optee, arg_cache_flags);
+	mutex_init(&optee->rpmb_dev_mutex);
 
 	platform_set_drvdata(pdev, optee);
 	ctx = teedev_open(optee->teedev);
@@ -1782,6 +1783,7 @@  static int optee_probe(struct platform_device *pdev)
 err_close_ctx:
 	teedev_close_context(ctx);
 err_supp_uninit:
+	mutex_destroy(&optee->rpmb_dev_mutex);
 	optee_shm_arg_cache_uninit(optee);
 	optee_supp_uninit(&optee->supp);
 	mutex_destroy(&optee->call_queue.mutex);