diff mbox

[RFC,ivopts] ARM - Make ivopts take into account whether pre and post increments are actually supported on targets.

Message ID CACUk7=UivTgK7QHuy-9KfFT_QjEEgo=Gf3r69J4TsRc-iCxBhg@mail.gmail.com
State Accepted
Headers show

Commit Message

Ramana Radhakrishnan April 10, 2012, 12:50 p.m. UTC
On 28 March 2012 11:13, Richard Guenther <richard.guenther@gmail.com> wrote:
> On Wed, Mar 28, 2012 at 11:57 AM, Richard Guenther
> <richard.guenther@gmail.com> wrote:
>> On Tue, Mar 27, 2012 at 3:17 PM, Ramana Radhakrishnan
>> <ramana.radhakrishnan@linaro.org> wrote:
>>> And the patch is now attached ....
>>
>> This does not look like it would compile on any other target.
>
> Looks like the macros are pre-existing in rtl.h.  With that the ivopts change
> is ok.  I'll let arm folks decide over the arm specific bits.

Thanks for the approval on the ivopts stuff -which I haven't changed .
I have revised the ARM backend specific changes to tweak costs to
prevent auto-inc-dec from gratuitously adding more moves for the
pre/post_modify_disp variety of instructions and to disable these for
versions of the architecture which don't have support for LDRD.

I would like another set of eyes on the backend specific changes - I
am currently regression testing this final version on FSF trunk.

2012-04-10  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

	* tree-ssa-loop-ivopts.c (add_autoinc_candidates, get_address_cost):
	Replace use of HAVE_{POST/PRE}_{INCREMENT/DECREMENT} with
	USE_{LOAD/STORE}_{PRE/POST}_{INCREMENT/DECREMENT} appropriately.
	* config/arm/arm.h (ARM_AUTOINC_VALID_FOR_MODE_P): New.
	(USE_LOAD_POST_INCREMENT): Define.
	(USE_LOAD_PRE_INCREMENT): Define.
	(USE_LOAD_POST_DECREMENT): Define.
	(USE_LOAD_PRE_DECREMENT): Define.
	(USE_STORE_PRE_DECREMENT): Define.
	(USE_STORE_PRE_INCREMENT): Define.
	(USE_STORE_POST_DECREMENT): Define.
	(USE_STORE_POST_INCREMENT): Define.
	(arm_auto_incmodes): Add enumeration.
	* config/arm/arm-protos.h (arm_autoinc_modes_ok_p): Declare.
	* config/arm/arm.c (arm_autoinc_modes_ok_p): Define.
	(arm_rtx_costs_1): Adjust costs for
	auto-inc modes and pre / post modify in floating point mode.
	(arm_size_rtx_costs): Likewise.


regards,
Ramana



> Richard.
>
>> Richard.
>>
>>> Ramana
diff mbox

Patch

diff --git a/gcc/config/arm/arm-protos.h b/gcc/config/arm/arm-protos.h
index 900d09a..f9cb75a 100644
--- a/gcc/config/arm/arm-protos.h
+++ b/gcc/config/arm/arm-protos.h
@@ -248,4 +248,6 @@  extern int vfp3_const_double_for_fract_bits (rtx);
 extern void arm_expand_vec_perm (rtx target, rtx op0, rtx op1, rtx sel);
 extern bool arm_expand_vec_perm_const (rtx target, rtx op0, rtx op1, rtx sel);
 
+extern bool arm_autoinc_modes_ok_p (enum machine_mode, enum arm_auto_incmodes);
+
 #endif /* ! GCC_ARM_PROTOS_H */
diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c
index 5522fc1..6bc5aa9 100644
--- a/gcc/config/arm/arm.c
+++ b/gcc/config/arm/arm.c
@@ -7121,6 +7121,19 @@  arm_rtx_costs_1 (rtx x, enum rtx_code outer, int* total, bool speed)
       /* Memory costs quite a lot for the first word, but subsequent words
 	 load at the equivalent of a single insn each.  */
       *total = COSTS_N_INSNS (2 + ARM_NUM_REGS (mode));
+
+      /* If we have hard float or there is no support for ldrd 
+	 and strd there is no point in allowing post_dec, 
+	 pre_inc and pre/post_modify_disp to have the same cost
+	 for memory accesses in floating point modes.  */
+      if ((TARGET_HARD_FLOAT
+	   || !TARGET_LDRD)
+	  && (FLOAT_MODE_P (mode) &&
+	      (GET_CODE (XEXP (x, 0)) == POST_DEC
+	       || GET_CODE (XEXP (x, 0)) == PRE_INC
+	       || GET_CODE (XEXP (x, 0)) == PRE_MODIFY
+	       || GET_CODE (XEXP (x, 0)) == POST_MODIFY)))
+	*total += COSTS_N_INSNS (2);
       return true;
 
     case DIV:
@@ -7831,6 +7844,20 @@  arm_size_rtx_costs (rtx x, enum rtx_code code, enum rtx_code outer_code,
 	*total = COSTS_N_INSNS (2);
       else
 	*total = COSTS_N_INSNS (ARM_NUM_REGS (mode));
+
+      /* If we have hard float or there is no support for ldrd 
+	 and strd there is no point in allowing post_dec, 
+	 pre_inc and pre/post_modify_disp to have the same cost
+	 for memory accesses in floating point modes.  */      
+      if ((TARGET_HARD_FLOAT
+	   || !TARGET_LDRD)
+	  && (FLOAT_MODE_P (mode) &&
+	      (GET_CODE (XEXP (x, 0)) == POST_DEC
+	       || GET_CODE (XEXP (x, 0)) == PRE_INC
+	       || GET_CODE (XEXP (x, 0)) == PRE_MODIFY
+	       || GET_CODE (XEXP (x, 0)) == POST_MODIFY)))
+	*total = COSTS_N_INSNS (2);
+      
       return true;
 
     case DIV:
@@ -25680,5 +25707,51 @@  arm_vectorize_vec_perm_const_ok (enum machine_mode vmode,
   return ret;
 }
 
-
+bool
+arm_autoinc_modes_ok_p (enum machine_mode mode, enum arm_auto_incmodes code)
+{
+  /* If we are soft float and we do not have ldrd 
+     then all auto increment forms are ok.  */
+  if (TARGET_SOFT_FLOAT && (TARGET_LDRD || GET_MODE_SIZE (mode) <= 4))
+    return true;
+
+  switch (code)
+    {
+      /* Post increment and Pre Decrement are supported for all
+	 instruction forms except for vector forms.  */
+    case ARM_POST_INC:
+    case ARM_PRE_DEC:
+      if (VECTOR_MODE_P (mode))
+	{
+	  if (code != ARM_PRE_DEC)
+	    return true;
+	  else 
+	    return false;
+	}
+      
+      return true;
+
+    case ARM_POST_DEC:
+    case ARM_PRE_INC:
+      /* Without LDRD and mode size greater than 
+	 word size, there is no point in auto-incrementing
+         because ldm and stm will not have these forms.  */
+      if (!TARGET_LDRD && GET_MODE_SIZE (mode) > 4)
+	return false;
+
+      /* Vector and floating point modes do not support
+	 these auto increment forms.  */
+      if (FLOAT_MODE_P (mode) || VECTOR_MODE_P (mode))
+	return false;
+
+      return true;
+     
+    default:
+      return false;
+      
+    }
+
+  return false;
+}
+
 #include "gt-arm.h"
diff --git a/gcc/config/arm/arm.h b/gcc/config/arm/arm.h
index c6b4cc0..f4204e4 100644
--- a/gcc/config/arm/arm.h
+++ b/gcc/config/arm/arm.h
@@ -1613,6 +1613,30 @@  typedef struct
 #define HAVE_PRE_MODIFY_REG   TARGET_32BIT
 #define HAVE_POST_MODIFY_REG  TARGET_32BIT
 
+enum arm_auto_incmodes
+  {
+    ARM_POST_INC,
+    ARM_PRE_INC,
+    ARM_POST_DEC,
+    ARM_PRE_DEC
+  };
+
+#define ARM_AUTOINC_VALID_FOR_MODE_P(mode, code) \
+  (TARGET_32BIT && arm_autoinc_modes_ok_p (mode, code))
+#define USE_LOAD_POST_INCREMENT(mode) \
+  ARM_AUTOINC_VALID_FOR_MODE_P(mode, ARM_POST_INC)
+#define USE_LOAD_PRE_INCREMENT(mode)  \
+  ARM_AUTOINC_VALID_FOR_MODE_P(mode, ARM_PRE_INC)
+#define USE_LOAD_POST_DECREMENT(mode) \
+  ARM_AUTOINC_VALID_FOR_MODE_P(mode, ARM_POST_DEC)
+#define USE_LOAD_PRE_DECREMENT(mode)  \
+  ARM_AUTOINC_VALID_FOR_MODE_P(mode, ARM_PRE_DEC)
+
+#define USE_STORE_PRE_DECREMENT(mode) USE_LOAD_PRE_DECREMENT(mode)
+#define USE_STORE_PRE_INCREMENT(mode) USE_LOAD_PRE_INCREMENT(mode)
+#define USE_STORE_POST_DECREMENT(mode) USE_LOAD_POST_DECREMENT(mode)
+#define USE_STORE_POST_INCREMENT(mode) USE_LOAD_POST_INCREMENT(mode)
+
 /* Macros to check register numbers against specific register classes.  */
 
 /* These assume that REGNO is a hard or pseudo reg number.
diff --git a/gcc/tree-ssa-loop-ivopts.c b/gcc/tree-ssa-loop-ivopts.c
index 527c911..ac37608 100644
--- a/gcc/tree-ssa-loop-ivopts.c
+++ b/gcc/tree-ssa-loop-ivopts.c
@@ -2361,8 +2361,12 @@  add_autoinc_candidates (struct ivopts_data *data, tree base, tree step,
   cstepi = int_cst_value (step);
 
   mem_mode = TYPE_MODE (TREE_TYPE (*use->op_p));
-  if ((HAVE_PRE_INCREMENT && GET_MODE_SIZE (mem_mode) == cstepi)
-      || (HAVE_PRE_DECREMENT && GET_MODE_SIZE (mem_mode) == -cstepi))
+  if (((USE_LOAD_PRE_INCREMENT (mem_mode)
+	|| USE_STORE_PRE_INCREMENT (mem_mode))
+       && GET_MODE_SIZE (mem_mode) == cstepi)
+      || ((USE_LOAD_PRE_DECREMENT (mem_mode)
+	   || USE_STORE_PRE_DECREMENT (mem_mode))
+	  && GET_MODE_SIZE (mem_mode) == -cstepi))
     {
       enum tree_code code = MINUS_EXPR;
       tree new_base;
@@ -2379,8 +2383,12 @@  add_autoinc_candidates (struct ivopts_data *data, tree base, tree step,
       add_candidate_1 (data, new_base, step, important, IP_BEFORE_USE, use,
 		       use->stmt);
     }
-  if ((HAVE_POST_INCREMENT && GET_MODE_SIZE (mem_mode) == cstepi)
-      || (HAVE_POST_DECREMENT && GET_MODE_SIZE (mem_mode) == -cstepi))
+  if (((USE_LOAD_POST_INCREMENT (mem_mode)
+	|| USE_STORE_POST_INCREMENT (mem_mode))
+       && GET_MODE_SIZE (mem_mode) == cstepi)
+      || ((USE_LOAD_POST_DECREMENT (mem_mode)
+	   || USE_STORE_POST_DECREMENT (mem_mode))
+	  && GET_MODE_SIZE (mem_mode) == -cstepi))
     {
       add_candidate_1 (data, base, step, important, IP_AFTER_USE, use,
 		       use->stmt);
@@ -3314,25 +3322,29 @@  get_address_cost (bool symbol_present, bool var_present,
       reg0 = gen_raw_REG (address_mode, LAST_VIRTUAL_REGISTER + 1);
       reg1 = gen_raw_REG (address_mode, LAST_VIRTUAL_REGISTER + 2);
 
-      if (HAVE_PRE_DECREMENT)
+      if (USE_LOAD_PRE_DECREMENT (mem_mode) 
+	  || USE_STORE_PRE_DECREMENT (mem_mode))
 	{
 	  addr = gen_rtx_PRE_DEC (address_mode, reg0);
 	  has_predec[mem_mode]
 	    = memory_address_addr_space_p (mem_mode, addr, as);
 	}
-      if (HAVE_POST_DECREMENT)
+      if (USE_LOAD_POST_DECREMENT (mem_mode) 
+	  || USE_STORE_POST_DECREMENT (mem_mode))
 	{
 	  addr = gen_rtx_POST_DEC (address_mode, reg0);
 	  has_postdec[mem_mode]
 	    = memory_address_addr_space_p (mem_mode, addr, as);
 	}
-      if (HAVE_PRE_INCREMENT)
+      if (USE_LOAD_PRE_INCREMENT (mem_mode) 
+	  || USE_STORE_PRE_DECREMENT (mem_mode))
 	{
 	  addr = gen_rtx_PRE_INC (address_mode, reg0);
 	  has_preinc[mem_mode]
 	    = memory_address_addr_space_p (mem_mode, addr, as);
 	}
-      if (HAVE_POST_INCREMENT)
+      if (USE_LOAD_POST_INCREMENT (mem_mode) 
+	  || USE_STORE_POST_INCREMENT (mem_mode))
 	{
 	  addr = gen_rtx_POST_INC (address_mode, reg0);
 	  has_postinc[mem_mode]