diff mbox series

arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected

Message ID 20240209-qcm6490-gcc-protected-clocks-v1-1-bd3487b2e7b1@quicinc.com
State Accepted
Commit 7c6bef576a8891abce08d448165b53328032aa5f
Headers show
Series arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected | expand

Commit Message

Bjorn Andersson Feb. 9, 2024, 4:21 p.m. UTC 
The SC7180 GCC binding describes clocks which, due to the difference in
security model, are not accessible on the RB3gen2 - in the same way seen
on QCM6490.

Mark these clocks as protected, to allow the board to boot.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
I did notice Taniya's patch [1] after writing this patch. I'd prefer to
merge this minimal set asap, to make the board boot, unless there's a
strong argument for including those other clocks in the protected list.

[1] https://lore.kernel.org/linux-arm-msm/20240208062836.19767-6-quic_tdas@quicinc.com/
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)


---
base-commit: b1d3a0e70c3881d2f8cf6692ccf7c2a4fb2d030d
change-id: 20240209-qcm6490-gcc-protected-clocks-ee5fafdb76b3

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 8bb7d13d85f6..97b1586f9f19 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -413,6 +413,24 @@  vreg_bob_3p296: bob {
 	};
 };
 
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_EDP_CLKREF_EN>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };