| Message ID | 20240221-x1e80100-dts-smb2360-v2-2-037d183cc021@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: x1e80100: Add support for eUSB2 repeaters | expand |
On 24-02-21 15:41:41, Konrad Dybcio wrote: > On 21.02.2024 15:38, Abel Vesa wrote: > > Add nodes for SMB2360 with the eUSB2 repeater nodes. > > > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > > --- > > arch/arm64/boot/dts/qcom/smb2360.dtsi | 51 +++++++++++++++++++++++++++++++++++ > > 1 file changed, 51 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/smb2360.dtsi b/arch/arm64/boot/dts/qcom/smb2360.dtsi > > new file mode 100644 > > index 000000000000..8d7bdb56e6fe > > --- /dev/null > > +++ b/arch/arm64/boot/dts/qcom/smb2360.dtsi > > @@ -0,0 +1,51 @@ > > +// SPDX-License-Identifier: BSD-3-Clause > > +/* > > + * Copyright (c) 2023, Linaro Limited > > + */ > > + > > +#include <dt-bindings/interrupt-controller/irq.h> > > +#include <dt-bindings/spmi/spmi.h> > > + > > +/ { > > +}; > > + > > +&spmi_bus1 { > > + smb2360h: pmic@7 { > > Hm, I'm not 100% sure about bringing in this letter-suffix notation.. > > But then, is there anything better? What are they called in schematics? > SMB2360_n, perhaps? Yeah, just realized that this is wrong. I need to do something like sc8280xp-pmics.dtsi. There are different sources of information for the suffix, some of them use smb2360k, some of them use smb2360_0. Will go with the second. > > konrad
diff --git a/arch/arm64/boot/dts/qcom/smb2360.dtsi b/arch/arm64/boot/dts/qcom/smb2360.dtsi new file mode 100644 index 000000000000..8d7bdb56e6fe --- /dev/null +++ b/arch/arm64/boot/dts/qcom/smb2360.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { +}; + +&spmi_bus1 { + smb2360h: pmic@7 { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_1_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360k: pmic@a { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_2_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360l: pmic@b { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_3_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +};
Add nodes for SMB2360 with the eUSB2 repeater nodes. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/smb2360.dtsi | 51 +++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)