@@ -834,6 +834,20 @@ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws)
DW_SPI_GET_BYTE(dws->ver, 1));
}
+ /*
+ * Try to detect the number of native chip-selects if the platform
+ * driver didn't set it up. There can be up to 16 lines configured.
+ */
+ if (!dws->num_cs) {
+ u32 ser;
+
+ dw_writel(dws, DW_SPI_SER, 0xffff);
+ ser = dw_readl(dws, DW_SPI_SER);
+ dw_writel(dws, DW_SPI_SER, 0);
+
+ dws->num_cs = hweight16(ser);
+ }
+
/*
* Try to detect the FIFO depth if not set by interface driver,
* the depth could be from 2 to 256 from HW spec
Aside with the FIFO depth and DFS field size it's possible to auto-detect a number of native chip-select synthesized in the DW APB/AHB SSI IP-core. It can be done just by writing ones to the SER register. The number of writable flags in the register is limited by the SSI_NUM_SLAVES IP-core synthesize parameter. All the upper flags are read-only and wired to zero. Based on that let's add the number of native CS auto-detection procedure so the low-level platform drivers wouldn't need to manually set it up unless it's required to set a constraint due to platform-specific reasons (for instance, due to a hardware bug). Signed-off-by: Serge Semin <fancer.lancer@gmail.com> --- drivers/spi/spi-dw-core.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)