@@ -11,9 +11,9 @@
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Qualcomm Technologies, Inc. Dragonboard 410c";
- compatible = "qcom,dragonboard", "qcom,apq8016-sbc";
+ compatible = "qcom,apq8016-sbc", "qcom,apq8016";
qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
qcom,board-id = <0x10018 0x0>;
#address-cells = <0x2>;
#size-cells = <0x2>;
@@ -78,8 +78,9 @@
compatible = "qcom,gcc-msm8916";
reg = <0x1800000 0x80000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
+ #clock-cells = <0x1>;
};
serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4";
@@ -90,17 +91,27 @@
pinctrl-0 = <&blsp1_uart>;
};
ehci@78d9000 {
- compatible = "qcom,ehci-host";
+ compatible = "qcom,ci-hdrc";
reg = <0x78d9000 0x400>;
phys = <&ehci_phy>;
- };
- ehci_phy: ehci_phy@78d9000 {
- compatible = "qcom,apq8016-usbphy";
- reg = <0x78d9000 0x400>;
- #phy-cells = <0>;
+ ulpi {
+ usb_hs_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8916",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+ reset-names = "phy", "por";
+ qcom,init-seq = /bits/ 8 <0x0 0x44>,
+ <0x1 0x6b>,
+ <0x2 0x24>,
+ <0x3 0x13>;
+ };
+ };
};
sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
@@ -8,8 +8,9 @@
#include <button.h>
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
+#include <dm/pinctrl.h>
#include <env.h>
#include <init.h>
#include <net.h>
#include <usb.h>
@@ -22,86 +23,34 @@
#include <linux/delay.h>
DECLARE_GLOBAL_DATA_PTR;
-int dram_init(void)
-{
- gd->ram_size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
+#define USB_HUB_RESET_GPIO 2
+#define USB_SW_SELECT_GPIO 3
int board_usb_init(int index, enum usb_init_type init)
{
- static struct udevice *pmic_gpio;
- static struct gpio_desc hub_reset, usb_sel;
- int ret = 0, node;
+ struct udevice *usb;
+ int ret = 0;
- if (!pmic_gpio) {
- ret = uclass_get_device_by_name(UCLASS_GPIO,
- "pm8916_gpios@c000",
- &pmic_gpio);
- if (ret < 0) {
- printf("Failed to find pm8916_gpios@c000 node.\n");
- return ret;
- }
+ /* USB device */
+ ret = device_find_global_by_ofnode(ofnode_path("/soc/usb"), &usb);
+ if (ret) {
+ printf("Cannot find USB device\n");
+ return ret;
}
- /* Try to request gpios needed to start usb host on dragonboard */
- if (!dm_gpio_is_valid(&hub_reset)) {
- node = fdt_subnode_offset(gd->fdt_blob,
- dev_of_offset(pmic_gpio),
- "usb_hub_reset_pm");
- if (node < 0) {
- printf("Failed to find usb_hub_reset_pm dt node.\n");
- return node;
- }
- ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
- "gpios", 0, &hub_reset, 0);
- if (ret < 0) {
- printf("Failed to request usb_hub_reset_pm gpio.\n");
- return ret;
- }
- }
-
- if (!dm_gpio_is_valid(&usb_sel)) {
- node = fdt_subnode_offset(gd->fdt_blob,
- dev_of_offset(pmic_gpio),
- "usb_sw_sel_pm");
- if (node < 0) {
- printf("Failed to find usb_sw_sel_pm dt node.\n");
- return 0;
- }
- ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
- "gpios", 0, &usb_sel, 0);
- if (ret < 0) {
- printf("Failed to request usb_sw_sel_pm gpio.\n");
- return ret;
- }
- }
-
- if (init == USB_INIT_HOST) {
- /* Start USB Hub */
- dm_gpio_set_dir_flags(&hub_reset,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
- mdelay(100);
- /* Switch usb to host connectors */
- dm_gpio_set_dir_flags(&usb_sel,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
- mdelay(100);
- } else { /* Device */
- /* Disable hub */
- dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT);
- /* Switch back to device connector */
- dm_gpio_set_dir_flags(&usb_sel, GPIOD_IS_OUT);
+ /* Select "default" or "device" pinctrl */
+ switch (init) {
+ case USB_INIT_HOST:
+ pinctrl_select_state(usb, "default");
+ break;
+ case USB_INIT_DEVICE:
+ pinctrl_select_state(usb, "device");
+ break;
+ default:
+ debug("Unknown usb_init_type %d\n", init);
+ break;
}
return 0;
}
deleted file mode 100644
@@ -1,10 +0,0 @@
-Chipidea EHCI controller (part of OTG controller) used on Qualcomm devices.
-
-Required properties:
-- compatible: must be "qcom,ehci-host"
-- reg: start address and size of the registers
-
-ehci@78d9000 {
- compatible = "qcom,ehci-host";
- reg = <0x78d9000 0x400>;
-};
@@ -12,8 +12,9 @@
#include <dm.h>
#include <errno.h>
#include <asm/io.h>
#include <linux/bitops.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include "clock-qcom.h"
/* Clocks: (from CLK_CTL_BASE) */
@@ -124,15 +125,15 @@ static ulong apq8016_clk_set_rate(struct clk *clk, ulong rate)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
- case 0: /* SDC1 */
+ case GCC_SDCC1_APPS_CLK: /* SDC1 */
return clk_init_sdc(priv, 0, rate);
break;
- case 1: /* SDC2 */
+ case GCC_SDCC2_APPS_CLK: /* SDC2 */
return clk_init_sdc(priv, 1, rate);
break;
- case 4: /* UART2 */
+ case GCC_BLSP1_UART2_APPS_CLK: /* UART2 */
return clk_init_uart(priv);
break;
default:
return 0;
@@ -73,9 +73,9 @@ static int msm_phy_reset(struct phy *phy)
static int msm_phy_probe(struct udevice *dev)
{
struct msm_phy_priv *priv = dev_get_priv(dev);
- priv->regs = dev_remap_addr(dev);
+ priv->regs = dev_remap_addr(dev_get_parent(dev));
if (!priv->regs)
return -EINVAL;
priv->ehci = (struct usb_ehci *)priv->regs;
@@ -95,9 +95,9 @@ static struct phy_ops msm_phy_ops = {
.reset = msm_phy_reset,
};
static const struct udevice_id msm_phy_ids[] = {
- { .compatible = "qcom,apq8016-usbphy" },
+ { .compatible = "qcom,usb-hs-phy-msm8916" },
{ }
};
U_BOOT_DRIVER(msm8916_usbphy) = {
@@ -28,9 +28,9 @@ static const char * const msm_pinctrl_pins[] = {
"qdsd_data3",
};
static const struct pinctrl_function msm_pinctrl_functions[] = {
- {"blsp1_uart", 2},
+ {"blsp_uart2", 2},
};
static const char *apq8016_get_function_name(struct udevice *dev,
unsigned int selector)
@@ -8,8 +8,9 @@
*/
#include <common.h>
#include <dm.h>
+#include <dm/lists.h>
#include <errno.h>
#include <usb.h>
#include <usb/ehci-ci.h>
#include <usb/ulpi.h>
@@ -118,8 +119,26 @@ static int ehci_usb_of_to_plat(struct udevice *dev)
return 0;
}
+static int ehci_usb_of_bind(struct udevice *dev)
+{
+ ofnode ulpi_node = ofnode_first_subnode(dev_ofnode(dev));
+ ofnode phy_node;
+
+ if (!ofnode_valid(ulpi_node))
+ return 0;
+
+ phy_node = ofnode_first_subnode(ulpi_node);
+ if (!ofnode_valid(phy_node)) {
+ printf("%s: ulpi subnode with no phy\n", __func__);
+ return -ENOENT;
+ }
+
+ return device_bind_driver_to_node(dev, "msm8916_usbphy", "msm8916_usbphy",
+ phy_node, NULL);
+}
+
#if defined(CONFIG_CI_UDC)
/* Little quirk that MSM needs with Chipidea controller
* Must reinit phy after reset
*/
@@ -131,17 +150,18 @@ void ci_init_after_reset(struct ehci_ctrl *ctrl)
}
#endif
static const struct udevice_id ehci_usb_ids[] = {
- { .compatible = "qcom,ehci-host", },
+ { .compatible = "qcom,ci-hdrc", },
{ }
};
U_BOOT_DRIVER(usb_ehci) = {
.name = "ehci_msm",
.id = UCLASS_USB,
.of_match = ehci_usb_ids,
.of_to_plat = ehci_usb_of_to_plat,
+ .bind = ehci_usb_of_bind,
.probe = ehci_usb_probe,
.remove = ehci_usb_remove,
.ops = &ehci_usb_ops,
.priv_auto = sizeof(struct msm_ehci_priv),
new file mode 100644
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2015 Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_GCC_8916_H
+#define _DT_BINDINGS_CLK_MSM_GCC_8916_H
+
+#define GPLL0 0
+#define GPLL0_VOTE 1
+#define BIMC_PLL 2
+#define BIMC_PLL_VOTE 3
+#define GPLL1 4
+#define GPLL1_VOTE 5
+#define GPLL2 6
+#define GPLL2_VOTE 7
+#define PCNOC_BFDCD_CLK_SRC 8
+#define SYSTEM_NOC_BFDCD_CLK_SRC 9
+#define CAMSS_AHB_CLK_SRC 10
+#define APSS_AHB_CLK_SRC 11
+#define CSI0_CLK_SRC 12
+#define CSI1_CLK_SRC 13
+#define GFX3D_CLK_SRC 14
+#define VFE0_CLK_SRC 15
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC 16
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC 17
+#define BLSP1_QUP2_I2C_APPS_CLK_SRC 18
+#define BLSP1_QUP2_SPI_APPS_CLK_SRC 19
+#define BLSP1_QUP3_I2C_APPS_CLK_SRC 20
+#define BLSP1_QUP3_SPI_APPS_CLK_SRC 21
+#define BLSP1_QUP4_I2C_APPS_CLK_SRC 22
+#define BLSP1_QUP4_SPI_APPS_CLK_SRC 23
+#define BLSP1_QUP5_I2C_APPS_CLK_SRC 24
+#define BLSP1_QUP5_SPI_APPS_CLK_SRC 25
+#define BLSP1_QUP6_I2C_APPS_CLK_SRC 26
+#define BLSP1_QUP6_SPI_APPS_CLK_SRC 27
+#define BLSP1_UART1_APPS_CLK_SRC 28
+#define BLSP1_UART2_APPS_CLK_SRC 29
+#define CCI_CLK_SRC 30
+#define CAMSS_GP0_CLK_SRC 31
+#define CAMSS_GP1_CLK_SRC 32
+#define JPEG0_CLK_SRC 33
+#define MCLK0_CLK_SRC 34
+#define MCLK1_CLK_SRC 35
+#define CSI0PHYTIMER_CLK_SRC 36
+#define CSI1PHYTIMER_CLK_SRC 37
+#define CPP_CLK_SRC 38
+#define CRYPTO_CLK_SRC 39
+#define GP1_CLK_SRC 40
+#define GP2_CLK_SRC 41
+#define GP3_CLK_SRC 42
+#define BYTE0_CLK_SRC 43
+#define ESC0_CLK_SRC 44
+#define MDP_CLK_SRC 45
+#define PCLK0_CLK_SRC 46
+#define VSYNC_CLK_SRC 47
+#define PDM2_CLK_SRC 48
+#define SDCC1_APPS_CLK_SRC 49
+#define SDCC2_APPS_CLK_SRC 50
+#define APSS_TCU_CLK_SRC 51
+#define USB_HS_SYSTEM_CLK_SRC 52
+#define VCODEC0_CLK_SRC 53
+#define GCC_BLSP1_AHB_CLK 54
+#define GCC_BLSP1_SLEEP_CLK 55
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK 56
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK 57
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK 58
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK 59
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK 60
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK 61
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK 62
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK 63
+#define GCC_BLSP1_QUP5_I2C_APPS_CLK 64
+#define GCC_BLSP1_QUP5_SPI_APPS_CLK 65
+#define GCC_BLSP1_QUP6_I2C_APPS_CLK 66
+#define GCC_BLSP1_QUP6_SPI_APPS_CLK 67
+#define GCC_BLSP1_UART1_APPS_CLK 68
+#define GCC_BLSP1_UART2_APPS_CLK 69
+#define GCC_BOOT_ROM_AHB_CLK 70
+#define GCC_CAMSS_CCI_AHB_CLK 71
+#define GCC_CAMSS_CCI_CLK 72
+#define GCC_CAMSS_CSI0_AHB_CLK 73
+#define GCC_CAMSS_CSI0_CLK 74
+#define GCC_CAMSS_CSI0PHY_CLK 75
+#define GCC_CAMSS_CSI0PIX_CLK 76
+#define GCC_CAMSS_CSI0RDI_CLK 77
+#define GCC_CAMSS_CSI1_AHB_CLK 78
+#define GCC_CAMSS_CSI1_CLK 79
+#define GCC_CAMSS_CSI1PHY_CLK 80
+#define GCC_CAMSS_CSI1PIX_CLK 81
+#define GCC_CAMSS_CSI1RDI_CLK 82
+#define GCC_CAMSS_CSI_VFE0_CLK 83
+#define GCC_CAMSS_GP0_CLK 84
+#define GCC_CAMSS_GP1_CLK 85
+#define GCC_CAMSS_ISPIF_AHB_CLK 86
+#define GCC_CAMSS_JPEG0_CLK 87
+#define GCC_CAMSS_JPEG_AHB_CLK 88
+#define GCC_CAMSS_JPEG_AXI_CLK 89
+#define GCC_CAMSS_MCLK0_CLK 90
+#define GCC_CAMSS_MCLK1_CLK 91
+#define GCC_CAMSS_MICRO_AHB_CLK 92
+#define GCC_CAMSS_CSI0PHYTIMER_CLK 93
+#define GCC_CAMSS_CSI1PHYTIMER_CLK 94
+#define GCC_CAMSS_AHB_CLK 95
+#define GCC_CAMSS_TOP_AHB_CLK 96
+#define GCC_CAMSS_CPP_AHB_CLK 97
+#define GCC_CAMSS_CPP_CLK 98
+#define GCC_CAMSS_VFE0_CLK 99
+#define GCC_CAMSS_VFE_AHB_CLK 100
+#define GCC_CAMSS_VFE_AXI_CLK 101
+#define GCC_CRYPTO_AHB_CLK 102
+#define GCC_CRYPTO_AXI_CLK 103
+#define GCC_CRYPTO_CLK 104
+#define GCC_OXILI_GMEM_CLK 105
+#define GCC_GP1_CLK 106
+#define GCC_GP2_CLK 107
+#define GCC_GP3_CLK 108
+#define GCC_MDSS_AHB_CLK 109
+#define GCC_MDSS_AXI_CLK 110
+#define GCC_MDSS_BYTE0_CLK 111
+#define GCC_MDSS_ESC0_CLK 112
+#define GCC_MDSS_MDP_CLK 113
+#define GCC_MDSS_PCLK0_CLK 114
+#define GCC_MDSS_VSYNC_CLK 115
+#define GCC_MSS_CFG_AHB_CLK 116
+#define GCC_OXILI_AHB_CLK 117
+#define GCC_OXILI_GFX3D_CLK 118
+#define GCC_PDM2_CLK 119
+#define GCC_PDM_AHB_CLK 120
+#define GCC_PRNG_AHB_CLK 121
+#define GCC_SDCC1_AHB_CLK 122
+#define GCC_SDCC1_APPS_CLK 123
+#define GCC_SDCC2_AHB_CLK 124
+#define GCC_SDCC2_APPS_CLK 125
+#define GCC_GTCU_AHB_CLK 126
+#define GCC_JPEG_TBU_CLK 127
+#define GCC_MDP_TBU_CLK 128
+#define GCC_SMMU_CFG_CLK 129
+#define GCC_VENUS_TBU_CLK 130
+#define GCC_VFE_TBU_CLK 131
+#define GCC_USB2A_PHY_SLEEP_CLK 132
+#define GCC_USB_HS_AHB_CLK 133
+#define GCC_USB_HS_SYSTEM_CLK 134
+#define GCC_VENUS0_AHB_CLK 135
+#define GCC_VENUS0_AXI_CLK 136
+#define GCC_VENUS0_VCODEC0_CLK 137
+#define BIMC_DDR_CLK_SRC 138
+#define GCC_APSS_TCU_CLK 139
+#define GCC_GFX_TCU_CLK 140
+#define BIMC_GPU_CLK_SRC 141
+#define GCC_BIMC_GFX_CLK 142
+#define GCC_BIMC_GPU_CLK 143
+#define ULTAUDIO_LPAIF_PRI_I2S_CLK_SRC 144
+#define ULTAUDIO_LPAIF_SEC_I2S_CLK_SRC 145
+#define ULTAUDIO_LPAIF_AUX_I2S_CLK_SRC 146
+#define ULTAUDIO_XO_CLK_SRC 147
+#define ULTAUDIO_AHBFABRIC_CLK_SRC 148
+#define CODEC_DIGCODEC_CLK_SRC 149
+#define GCC_ULTAUDIO_PCNOC_MPORT_CLK 150
+#define GCC_ULTAUDIO_PCNOC_SWAY_CLK 151
+#define GCC_ULTAUDIO_AVSYNC_XO_CLK 152
+#define GCC_ULTAUDIO_STC_XO_CLK 153
+#define GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK 154
+#define GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_LPM_CLK 155
+#define GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK 156
+#define GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK 157
+#define GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK 158
+#define GCC_CODEC_DIGCODEC_CLK 159
+#define GCC_MSS_Q6_BIMC_AXI_CLK 160
+
+/* Indexes for GDSCs */
+#define BIMC_GDSC 0
+#define VENUS_GDSC 1
+#define MDSS_GDSC 2
+#define JPEG_GDSC 3
+#define VFE_GDSC 4
+#define OXILI_GDSC 5
+
+#endif