diff mbox series

[v5,24/39] board: qcs404-evb: drop board code

Message ID 20240226-b4-qcom-common-target-v5-24-10c8e078befb@linaro.org
State Accepted
Commit 90744c1a14c54d08c9981869dec9262289da2d6b
Headers show
Series Qualcomm generic board support | expand

Commit Message

Caleb Connolly Feb. 26, 2024, 5:26 p.m. UTC 
This board is entirely supported by the generic arch code and DTS. The
board code used to handle turning on the vbus regulator, however this is
now handled via DT.

With this, the board specific defconfig is also no longer needed, so
drop it as well.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 board/qualcomm/qcs404-evb/Makefile     |  6 ----
 board/qualcomm/qcs404-evb/qcs404-evb.c | 49 -----------------------------
 configs/qcs404evb_defconfig            | 56 ----------------------------------
 3 files changed, 111 deletions(-)
diff mbox series

Patch

diff --git a/board/qualcomm/qcs404-evb/Makefile b/board/qualcomm/qcs404-evb/Makefile
deleted file mode 100644
index 4665827e0859..000000000000
--- a/board/qualcomm/qcs404-evb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
-#
-
-obj-y += qcs404-evb.o
diff --git a/board/qualcomm/qcs404-evb/qcs404-evb.c b/board/qualcomm/qcs404-evb/qcs404-evb.c
deleted file mode 100644
index 1a4b1f97a3ae..000000000000
--- a/board/qualcomm/qcs404-evb/qcs404-evb.c
+++ /dev/null
@@ -1,49 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Board init file for QCS404-EVB
- *
- * (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <dm.h>
-#include <env.h>
-#include <init.h>
-#include <asm/cache.h>
-#include <asm/gpio.h>
-#include <asm/global_data.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void qcom_board_init(void)
-{
-	struct udevice *pmic_gpio;
-	struct gpio_desc usb_vbus_boost_pin;
-	int ret, node;
-
-	ret = uclass_get_device_by_name(UCLASS_GPIO,
-					"pms405_gpios@c000",
-					&pmic_gpio);
-	if (ret < 0) {
-		printf("Failed to find pms405_gpios@c000 node.\n");
-		return;
-	}
-
-	node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pmic_gpio),
-				  "usb_vbus_boost_pin");
-	if (node < 0) {
-		printf("Failed to find usb_hub_reset_pm dt node.\n");
-		return;
-	}
-	ret = gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0,
-					 &usb_vbus_boost_pin, 0);
-	if (ret < 0) {
-		printf("Failed to request usb_hub_reset_pm gpio.\n");
-		return;
-	}
-
-	dm_gpio_set_dir_flags(&usb_vbus_boost_pin,
-			      GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
-}
diff --git a/configs/qcs404evb_defconfig b/configs/qcs404evb_defconfig
deleted file mode 100644
index d85d193895b0..000000000000
--- a/configs/qcs404evb_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_SYS_BOARD="qcs404-evb"
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_COUNTER_FREQUENCY=19000000
-CONFIG_POSITION_INDEPENDENT=y
-CONFIG_ARCH_SNAPDRAGON=y
-CONFIG_DEFAULT_DEVICE_TREE="qcs404-evb"
-CONFIG_IDENT_STRING="\nQualcomm QCS404-EVB"
-CONFIG_SYS_LOAD_ADDR=0x80000000
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTDELAY=5
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="earlycon ignore_loglevel root= clk_ignore_unused"
-CONFIG_SAVE_PREV_BL_FDT_ADDR=y
-CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
-CONFIG_SYS_CBSIZE=512
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=64
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_NET is not set
-CONFIG_CLK=y
-CONFIG_CLK_QCOM_QCS404=y
-CONFIG_MSM_GPIO=y
-CONFIG_QCOM_PMIC_GPIO=y
-CONFIG_MISC=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ADMA=y
-CONFIG_MMC_SDHCI_MSM=y
-CONFIG_PHY=y
-CONFIG_PHY_QCOM_USB_HS_28NM=y
-CONFIG_PHY_QCOM_USB_SS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_QCOM_QCS404=y
-CONFIG_DM_PMIC=y
-CONFIG_PMIC_QCOM=y
-CONFIG_MSM_SERIAL=y
-CONFIG_SPMI_MSM=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_STORAGE=y
-CONFIG_LMB_MAX_REGIONS=64