[3/3,v2] wifi: ath11k: fix few -Wmaybe-uninitialized warnings

When compiling with gcc version 14.0.1 20240226 (experimental) and
W=12, I've noticed the following warnings:

drivers/net/wireless/ath/ath11k/qmi.c: In function 'ath11k_qmi_load_file_target_mem':
drivers/net/wireless/ath/ath11k/qmi.c:2401:16: warning: 'ret' may be used uninitialized
[-Wmaybe-uninitialized]
 2401 |         return ret;

drivers/net/wireless/ath/ath11k/qmi.c: In function 'ath11k_qmi_load_bdf_qmi':
drivers/net/wireless/ath/ath11k/qmi.c:2494:17: warning: 'fw_entry' may be used uninitialized
[-Wmaybe-uninitialized]
 2494 |                 release_firmware(fw_entry);

And a bunch of them traced to an uninitialized fields of the same
variable, e.g.:

drivers/net/wireless/ath/ath11k/spectral.c: In function 'ath11k_spectral_process_data':
drivers/net/wireless/ath/ath11k/spectral.c:700:47: warning: 'summ_rpt.meta.freq1' may
be used uninitialized [-Wmaybe-uninitialized]
  700 |         struct ath11k_spectral_summary_report summ_rpt;

Fix all of the above by using 0, NULL, and {} initializers, respectively.
Note there are few more (less obvious) -Wmaybe-uninitialized warnings
still remains, but they're hardly possible to fix without running on
a physical hardware. Compile tested only.

Also noticed by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
---
v2: use {} initializer (Jeff Johnson) and aggregate to the series
---
 drivers/net/wireless/ath/ath11k/qmi.c      | 4 ++--
 drivers/net/wireless/ath/ath11k/spectral.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

On 2/29/2024 12:40 AM, Dmitry Antipov wrote:
> When compiling with gcc version 14.0.1 20240226 (experimental) and
> W=12, I've noticed the following warnings:
> 
> drivers/net/wireless/ath/ath11k/qmi.c: In function 'ath11k_qmi_load_file_target_mem':
> drivers/net/wireless/ath/ath11k/qmi.c:2401:16: warning: 'ret' may be used uninitialized
> [-Wmaybe-uninitialized]
>  2401 |         return ret;
> 
> drivers/net/wireless/ath/ath11k/qmi.c: In function 'ath11k_qmi_load_bdf_qmi':
> drivers/net/wireless/ath/ath11k/qmi.c:2494:17: warning: 'fw_entry' may be used uninitialized
> [-Wmaybe-uninitialized]
>  2494 |                 release_firmware(fw_entry);
> 
> And a bunch of them traced to an uninitialized fields of the same
> variable, e.g.:
> 
> drivers/net/wireless/ath/ath11k/spectral.c: In function 'ath11k_spectral_process_data':
> drivers/net/wireless/ath/ath11k/spectral.c:700:47: warning: 'summ_rpt.meta.freq1' may
> be used uninitialized [-Wmaybe-uninitialized]

looks like a false positive since ath11k_spectral_pull_summary() always
sets the entire meta struct:
	memcpy(&report->meta, meta, sizeof(*meta));

>   700 |         struct ath11k_spectral_summary_report summ_rpt;
> 
> Fix all of the above by using 0, NULL, and {} initializers, respectively.
> Note there are few more (less obvious) -Wmaybe-uninitialized warnings
> still remains, but they're hardly possible to fix without running on
> a physical hardware. Compile tested only.
> 
> Also noticed by Linux Verification Center (linuxtesting.org) with SVACE.
> 
> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
> ---
> v2: use {} initializer (Jeff Johnson) and aggregate to the series
> ---
>  drivers/net/wireless/ath/ath11k/qmi.c      | 4 ++--
>  drivers/net/wireless/ath/ath11k/spectral.c | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
> index 5006f81f779b..4477f652e068 100644
> --- a/drivers/net/wireless/ath/ath11k/qmi.c
> +++ b/drivers/net/wireless/ath/ath11k/qmi.c
> @@ -2293,7 +2293,7 @@ static int ath11k_qmi_load_file_target_mem(struct ath11k_base *ab,
>  	struct qmi_txn txn;
>  	const u8 *temp = data;
>  	void __iomem *bdf_addr = NULL;
> -	int ret;
> +	int ret = 0;

as previously discussed this one I'll begrudgingly take.
please submit as a stand-alone patch

>  	u32 remaining = len;
>  
>  	req = kzalloc(sizeof(*req), GFP_KERNEL);
> @@ -2406,7 +2406,7 @@ static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab,
>  {
>  	struct device *dev = ab->dev;
>  	char filename[ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE];
> -	const struct firmware *fw_entry;
> +	const struct firmware *fw_entry = NULL;

note that this also seems to be fixing a false positive.

the "maybe uninitialized" reference is:

out_qmi_cal:
	if (!ab->qmi.target.eeprom_caldata)
		release_firmware(fw_entry);

fw_entry is currently assigned:
	if (ab->qmi.target.eeprom_caldata) {
		...
	} else {
		snprintf(filename, sizeof(filename), "cal-%s-%s.bin",
			 ath11k_bus_str(ab->hif.bus), dev_name(dev));
		fw_entry = ath11k_core_firmware_request(ab, filename);
	}

So unless I'm missing something it is always the case that fw_entry will
be initialized when ab->qmi.target.eeprom_caldata is not set.

>  	struct ath11k_board_data bd;
>  	u32 fw_size, file_type;
>  	int ret = 0, bdf_type;
> diff --git a/drivers/net/wireless/ath/ath11k/spectral.c b/drivers/net/wireless/ath/ath11k/spectral.c
> index 79e091134515..9834e7dc5120 100644
> --- a/drivers/net/wireless/ath/ath11k/spectral.c
> +++ b/drivers/net/wireless/ath/ath11k/spectral.c
> @@ -697,7 +697,7 @@ static int ath11k_spectral_process_data(struct ath11k *ar,
>  	struct ath11k_base *ab = ar->ab;
>  	struct spectral_tlv *tlv;
>  	struct spectral_summary_fft_report *summary = NULL;
> -	struct ath11k_spectral_summary_report summ_rpt;
> +	struct ath11k_spectral_summary_report summ_rpt = {};
>  	struct fft_sample_ath11k *fft_sample = NULL;
>  	u8 *data;
>  	u32 data_len, i;

so NAK on changes which "fix" false positives.