@@ -2032,8 +2032,6 @@ static int rtw_chip_board_info_setup(struct rtw_dev *rtwdev)
rtw_phy_setup_phy_cond(rtwdev, hal->pkg_type);
rtw_phy_init_tx_power(rtwdev);
- if (rfe_def->agc_btg_tbl)
- rtw_load_table(rtwdev, rfe_def->agc_btg_tbl);
rtw_load_table(rtwdev, rfe_def->phy_pg_tbl);
rtw_load_table(rtwdev, rfe_def->txpwr_lmt_tbl);
rtw_phy_tx_power_by_rate_config(hal);
@@ -1761,12 +1761,15 @@ static void rtw_load_rfk_table(struct rtw_dev *rtwdev)
void rtw_phy_load_tables(struct rtw_dev *rtwdev)
{
+ const struct rtw_rfe_def *rfe_def = rtw_get_rfe_def(rtwdev);
const struct rtw_chip_info *chip = rtwdev->chip;
u8 rf_path;
rtw_load_table(rtwdev, chip->mac_tbl);
rtw_load_table(rtwdev, chip->bb_tbl);
rtw_load_table(rtwdev, chip->agc_tbl);
+ if (rfe_def->agc_btg_tbl)
+ rtw_load_table(rtwdev, rfe_def->agc_btg_tbl);
rtw_load_rfk_table(rtwdev);
for (rf_path = 0; rf_path < rtwdev->hal.rf_path_num; rf_path++) {
Tenda U9 V2.0, which contains RTL8811CU, is practically unusable because of frequent disconnections: Feb 23 14:46:45 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:46:46 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 Feb 23 14:46:52 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED - Connection to 90:55:de:__:__:__ completed [id=0 id_str=] Feb 23 14:46:54 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:46:55 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 Feb 23 14:47:01 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED - Connection to 90:55:de:__:__:__ completed [id=0 id_str=] Feb 23 14:47:04 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:47:05 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 This is caused by a mistake in the chip initialisation. This version of the chip requires loading an extra AGC table right after the main one, but the extra table is being loaded at the wrong time, in rtw_chip_board_info_setup(). Move the extra AGC table loading to the right place, in rtw_phy_load_tables(). The rtw_chip_board_info_setup() can only do "software" things, and rtw_phy_load_tables() can really do IO. Fixes: 5d6651fe8583 ("rtw88: 8821c: support RFE type2 wifi NIC") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- v2: - Add more information in the commit message. --- drivers/net/wireless/realtek/rtw88/main.c | 2 -- drivers/net/wireless/realtek/rtw88/phy.c | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-)