diff mbox series

[v3] i2c: i801: Avoid potential double call to gpiod_remove_lookup_table

Message ID 8d35529d-8ba9-4bdd-a3a3-00d67ab6f2d5@gmail.com
State New
Headers show
Series [v3] i2c: i801: Avoid potential double call to gpiod_remove_lookup_table | expand

Commit Message

Heiner Kallweit March 4, 2024, 8:31 p.m. UTC
If registering the platform device fails, the lookup table is
removed in the error path. On module removal we would try to
remove the lookup table again. Fix this by setting priv->lookup
only if registering the platform device was successful.
In addition free the memory allocated for the lookup table in
the error path.

Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing")
Cc: stable@vger.kernel.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- cc stable
- free memory allocated for the lookup table
v3:
- cc'ed Linus
---
 drivers/i2c/busses/i2c-i801.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Linus Walleij March 5, 2024, 8:54 a.m. UTC | #1
On Mon, Mar 4, 2024 at 9:31 PM Heiner Kallweit <hkallweit1@gmail.com> wrote:

> If registering the platform device fails, the lookup table is
> removed in the error path. On module removal we would try to
> remove the lookup table again. Fix this by setting priv->lookup
> only if registering the platform device was successful.
> In addition free the memory allocated for the lookup table in
> the error path.
>
> Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing")
> Cc: stable@vger.kernel.org
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> v2:
> - cc stable
> - free memory allocated for the lookup table
> v3:
> - cc'ed Linus

My bug I guess, mea culpa.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Andi Shyti March 5, 2024, 9:48 a.m. UTC | #2
Hi Linus,

> > If registering the platform device fails, the lookup table is
> > removed in the error path. On module removal we would try to
> > remove the lookup table again. Fix this by setting priv->lookup
> > only if registering the platform device was successful.
> > In addition free the memory allocated for the lookup table in
> > the error path.
> >
> > Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing")
> > Cc: stable@vger.kernel.org
> > Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> > ---
> > v2:
> > - cc stable
> > - free memory allocated for the lookup table
> > v3:
> > - cc'ed Linus
> 
> My bug I guess, mea culpa.
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Thanks for your review! I have pushed this patch only in my
testing branch so that i can still add your r-b.

Andi
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 291c609d1..9c624f31c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1428,7 +1428,6 @@  static void i801_add_mux(struct i801_priv *priv)
 		lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip,
 					       mux_config->gpios[i], "mux", 0);
 	gpiod_add_lookup_table(lookup);
-	priv->lookup = lookup;
 
 	/*
 	 * Register the mux device, we use PLATFORM_DEVID_NONE here
@@ -1442,7 +1441,10 @@  static void i801_add_mux(struct i801_priv *priv)
 				sizeof(struct i2c_mux_gpio_platform_data));
 	if (IS_ERR(priv->mux_pdev)) {
 		gpiod_remove_lookup_table(lookup);
+		devm_kfree(dev, lookup);
 		dev_err(dev, "Failed to register i2c-mux-gpio device\n");
+	} else {
+		priv->lookup = lookup;
 	}
 }