| Message ID | 20240305142113.795005-1-robimarko@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [net-next,v3] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set | expand |
On Tue, Mar 05, 2024 at 03:20:33PM +0100, Robert Marko wrote: > Kernel bot has discovered that if CONFIG_GPIOLIB is not set compilation > will fail. > > Upon investigation the issue is that qca807x_gpio() is guarded by a > preprocessor check but then it is called under > if (IS_ENABLED(CONFIG_GPIOLIB)) in the probe call so the compiler will > error out since qca807x_gpio() has not been declared if CONFIG_GPIOLIB has > not been set. > > Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family") > Reported-by: kernel test robot <lkp@intel.com> > Closes: https://lore.kernel.org/oe-kbuild-all/202403031332.IGAbZzwq-lkp@intel.com/ > Signed-off-by: Robert Marko <robimarko@gmail.com> > --- > Changes in v3: > * Target net-next tree > Changes in v2: > * Reduce the code indent level Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested
Hello: This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Tue, 5 Mar 2024 15:20:33 +0100 you wrote: > Kernel bot has discovered that if CONFIG_GPIOLIB is not set compilation > will fail. > > Upon investigation the issue is that qca807x_gpio() is guarded by a > preprocessor check but then it is called under > if (IS_ENABLED(CONFIG_GPIOLIB)) in the probe call so the compiler will > error out since qca807x_gpio() has not been declared if CONFIG_GPIOLIB has > not been set. > > [...] Here is the summary with links: - [net-next,v3] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set https://git.kernel.org/netdev/net-next/c/1677293ed891 You are awesome, thank you!
diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c index 780c28e2e4aa..672c6929119a 100644 --- a/drivers/net/phy/qcom/qca807x.c +++ b/drivers/net/phy/qcom/qca807x.c @@ -732,24 +732,24 @@ static int qca807x_probe(struct phy_device *phydev) priv->dac_disable_bias_current_tweak = of_property_read_bool(node, "qcom,dac-disable-bias-current-tweak"); - if (IS_ENABLED(CONFIG_GPIOLIB)) { - /* Make sure we don't have mixed leds node and gpio-controller - * to prevent registering leds and having gpio-controller usage - * conflicting with them. - */ - if (of_find_property(node, "leds", NULL) && - of_find_property(node, "gpio-controller", NULL)) { - phydev_err(phydev, "Invalid property detected. LEDs and gpio-controller are mutually exclusive."); - return -EINVAL; - } +#if IS_ENABLED(CONFIG_GPIOLIB) + /* Make sure we don't have mixed leds node and gpio-controller + * to prevent registering leds and having gpio-controller usage + * conflicting with them. + */ + if (of_find_property(node, "leds", NULL) && + of_find_property(node, "gpio-controller", NULL)) { + phydev_err(phydev, "Invalid property detected. LEDs and gpio-controller are mutually exclusive."); + return -EINVAL; + } - /* Do not register a GPIO controller unless flagged for it */ - if (of_property_read_bool(node, "gpio-controller")) { - ret = qca807x_gpio(phydev); - if (ret) - return ret; - } + /* Do not register a GPIO controller unless flagged for it */ + if (of_property_read_bool(node, "gpio-controller")) { + ret = qca807x_gpio(phydev); + if (ret) + return ret; } +#endif /* Attach SFP bus on combo port*/ if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
Kernel bot has discovered that if CONFIG_GPIOLIB is not set compilation will fail. Upon investigation the issue is that qca807x_gpio() is guarded by a preprocessor check but then it is called under if (IS_ENABLED(CONFIG_GPIOLIB)) in the probe call so the compiler will error out since qca807x_gpio() has not been declared if CONFIG_GPIOLIB has not been set. Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403031332.IGAbZzwq-lkp@intel.com/ Signed-off-by: Robert Marko <robimarko@gmail.com> --- Changes in v3: * Target net-next tree Changes in v2: * Reduce the code indent level drivers/net/phy/qcom/qca807x.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)